Surge EDC Practicality
-
very nice EDC food prep tool, as the blade is sharp and thin and slices like it's nobody's business allowing for precise, clean cuts

That edc combo is serious stuff! If I were a tougher man, that is similar to what I would EDC. The BN 600 is fantastic for twisting heavy bailing wires and as a secondary pliar for bolts.
I would drop the micra and sak on the key chain. Instead I'd have a sak explorer in a pocket for fine scissors, grooming, etc. I use the loop often too. But, the Surge, mp600 bn, big knife, and compact light would be all ya ever needed.
I admittedly like to be overprepared and carry lots of my toys. These for the upcoming weekend:

My poor Rambler is feeling inadequate now.

Now I have to repair it's self esteem. -
I would not have buyers remorse! I would not worry if it is too big for some folks, but is it too big for you? I sometimes carry a Surge and it happily sits in a sheath on my belt. Right next to it is an LG V10 mobile phone in a Maxepedition holster. I do not even notice it is there! I prefer a larger multitool and do not care about how much it weighs. I actually even prefer a heavier tool. For some reason, it just gives me a feeling of confidence in it!! >:D :D
-
Day two of carry and I have no issues at all. The only time I notice its there is when I undo my belt :o ! I even used it this morning to tighten the handle on the sunroom door, open some packages at work and used the pliers to hold an a threaded insert. So far loving it.
-
@Yontz said:
Day two of carry and I have no issues at all. The only time I notice its there is when I undo my belt :o ! I even used it this morning to tighten the handle on the sunroom door, open some packages at work and used the pliers to hold an a threaded insert. So far loving it.That THUD when your pants hits the floor

Honey are you ok? Yes, that my SURGE hitting the floor not me

-
I know that scenario

-
Congrats!! Glad your diggin it!
-
If I could belt-carry a tool at work, I'd carry a Surge! Congrats and enjoy!

-
@an0nemus said:
If I could belt-carry a tool at work, I'd carry a Surge! Congrats and enjoy!
There is a pocket clip for it.

But, you'd need carbide liners to protect your pockets. :D
My work jeans have a leather tape measure place on the pocket and I think that would work in all seriousness. But, at my job, I am allowed to carry anything I want. My bosssaid I could carry a belt covered in knives, MTs, and tools if I needed them(I will test his resolve one day and post pics!.----I'm Batman.

-
If I could belt-carry a tool at work, I'd carry a Surge! Congrats and enjoy!

There is a pocket clip for it.

But, you'd need carbide liners to protect your pockets. :D
My work jeans have a leather tape measure place on the pocket and I think that would work in all seriousness. But, at my job, I am allowed to carry anything I want. My bosssaid I could carry a belt covered in knives, MTs, and tools if I needed them(I will test his resolve one day and post pics!.----I'm Batman.

Went to work for several weeks with my Charge clipped inside my waistband [emoji3]
But since I work in an office environment with sheeples around, a Surge on my side will cost me my job [emoji3]
-
If I could belt-carry a tool at work, I'd carry a Surge! Congrats and enjoy!

There is a pocket clip for it.

But, you'd need carbide liners to protect your pockets. :D
My work jeans have a leather tape measure place on the pocket and I think that would work in all seriousness. But, at my job, I am allowed to carry anything I want. My bosssaid I could carry a belt covered in knives, MTs, and tools if I needed them(I will test his resolve one day and post pics!.----I'm Batman.

Went to work for several weeks with my Charge clipped inside my waistband [emoji3]
But since I work in an office environment with sheeples around, a Surge on my side will cost me my job [emoji3]
Carry it on a murse, shoulder bag or BOB then


-
If I could belt-carry a tool at work, I'd carry a Surge! Congrats and enjoy!

There is a pocket clip for it.

But, you'd need carbide liners to protect your pockets. :D
My work jeans have a leather tape measure place on the pocket and I think that would work in all seriousness. But, at my job, I am allowed to carry anything I want. My bosssaid I could carry a belt covered in knives, MTs, and tools if I needed them(I will test his resolve one day and post pics!.----I'm Batman.

Went to work for several weeks with my Charge clipped inside my waistband

But since I work in an office environment with sheeples around, a Surge on my side will cost me my job

Carry it on a murse, shoulder bag or BOB then


SwissChamp on my belt (horizontal carry, very discrete), Charge in my bag
:D 
-
The harder part was all the accessories I wanted to carry with my Surge. The Surge itself while heavy became part of my day to day do outfit. A good belt and the position on the belt made it "easier" to carry every day.
-
@Aloha007 said:
The harder part was all the accessories I wanted to carry with my Surge. The Surge itself while heavy became part of my day to day do outfit. A good belt and the position on the belt made it "easier" to carry every day.I just realized that the nylon sheath that came with the Surge does have loops for horizontal carry. Might give that a go next week for work.
-
I actually like horizontal carry on some things. I like 2pm on the right side as I can grab the tool with either hand. I also keep pretty empty pockets so it kinda balances my left side which has my wallet and keys.
-
@Yontz said:
Came home from work tonight to a package on the table. The Surge has arrived! It's not as big, bulky or heavy as I was anticipating. I'm super stoked to start carrying it. I have already hit the garage and found an old bit kit in a non used toolbox that i will take to work tomorrow and give it a work over in the grinding room to accessorize my new Surge. The only confusion I had from the purchase was the model number. They advertised 830160 and I received 830859. I think it is just a matter of the sheath but I asked the seller anyhow. It is definite the newer model and not old stock. Glad to be part of the Surge Owners Club!Congrats. I think the 830160 comes with "Premium Leather Sheath" and 830859 comes with a nylon sheath which is actually better IMO.
-
Came home from work tonight to a package on the table. The Surge has arrived! It's not as big, bulky or heavy as I was anticipating. I'm super stoked to start carrying it. I have already hit the garage and found an old bit kit in a non used toolbox that i will take to work tomorrow and give it a work over in the grinding room to accessorize my new Surge. The only confusion I had from the purchase was the model number. They advertised 830160 and I received 830859. I think it is just a matter of the sheath but I asked the seller anyhow. It is definite the newer model and not old stock. Glad to be part of the Surge Owners Club!
Congrats. I think the 830160 comes with "Premium Leather Sheath" and 830859 comes with a nylon sheath which is actually better IMO.
Yes, I believe you are right. I reached out to the seller and it was s mistake. I just wanted to make sure I was paying for the current model. So far I really like the nylon sheath.
-
even though it always has the clip put in, I still carry it in a belt sheath and clip it to that :ahhh

Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login