Appreciation for the Explorer
-
Silly question coming at y'all.
Do they make a similar tool to the explorer with something else in the place of the magnifying glass?
Mainly concerned with having the 3 under tools, knife scissors, and especially having the philips out the front.
Thanks
-
@kaput said:
Silly question coming at y'all.Do they make a similar tool to the explorer with something else in the place of the magnifying glass?
Mainly concerned with having the 3 under tools, knife scissors, and especially having the philips out the front.
Thanks
The inline philips driver takes up half the space in a SAK layer and is typically paired with the magnifier, which takes up the remaining space within the layer. I can't think of any exceptions but there are so many SAKs past and present that I don't know for sure.
On a lighter side, you have a good question but posting it in the Explorer's Appreciation thread is like fingernails on the blackboard since the magnifier is one of the reasons many of us like the Explorer. :)
The people in this Swiss Army Knights forum are friendly and helpful and if there is a tool like the one you are seeking, there is a strong likelihood that someone knows about it. Alternatively, there is a group of folks with the skills to modify SAKs and create configurations that Victorinox hasn't created.
Good luck!
Jim
-
@kaput said:
Silly question coming at y'all.Do they make a similar tool to the explorer with something else in the place of the magnifying glass?
Mainly concerned with having the 3 under tools, knife scissors, and especially having the philips out the front.
Thanks
There is some with a light instead of the magnifying glas. I think huntsman lite and spartan lite if I remember correctly..
[It's not failure if you learn something from it]
-
Silly question coming at y'all.
Do they make a similar tool to the explorer with something else in the place of the magnifying glass?
Mainly concerned with having the 3 under tools, knife scissors, and especially having the philips out the front.
Thanks
The inline philips driver takes up half the space in a SAK layer and is typically paired with the magnifier, which takes up the remaining space within the layer. I can't think of any exceptions but there are so many SAKs past and present that I don't know for sure.
On a lighter side, you have a good question but posting it in the Explorer's Appreciation thread is like fingernails on the blackboard since the magnifier is one of the reasons many of us like the Explorer. :)
The people in this Swiss Army Knights forum are friendly and helpful and if there is a tool like the one you are seeking, there is a strong likelihood that someone knows about it. Alternatively, there is a group of folks with the skills to modify SAKs and create configurations that Victorinox hasn't created.
Good luck!
Jim
I guess it depends on the size you want. The S557 is 85mm has the inline Phillips and a "wrench"

There is also the 111mm Workchamp that has a #1 and #2 inline Phillips

Come to think of it, the 111mm line has quite a few options: Workchamp pic aboveHercules

And the outrider come to mind

I guess it depends on how much knife you want to carry
Lastly, SakWiki http://www.sakwiki.com/tiki-index.php is the best place to go to for sake of past and present. Check it out, hope you find what you want

-
Thanks guys. Appreciate the response. I was just curious, not saying the mag isn't useful. In fact I really want a explorer. Looks to be a fantastic piece. Thanks guys, hope to join your crew soon!
Thanks Demel for the pics and models of other out the front philips

-
@kaput said:
Thanks guys. Appreciate the response. I was just curious, not saying the mag isn't useful. In fact I really want a explorer. Looks to be a fantastic piece. Thanks guys, hope to join your crew soon!Thanks Demel for the pics and models of other out the front philips

Good deal!
I had taken your "like the Explorer" to pertain to the 91mm SAKs. As Demel pointed out, there are some excellent 111mm choices. I have Work Champ and think it is an excellent tool that feels great in the hand.
The Explorer is my favorite SAK partly because of the magnifier (I am also partial to other SAKs with magnifiers). For me, it helps when I need to read small print or serial numbers. If you have young eyes with better than 20/20 vision, the magnifier won't have the same usefulness. I'm definitely not impartial. For example, tonight I ordered my 23rd Explorer (Eagle Scout insignia).
Jim
-
@kaput said:
Silly question coming at y'all.Do they make a similar tool to the explorer with something else in the place of the magnifying glass?
Mainly concerned with having the 3 under tools, knife scissors, and especially having the philips out the front.
Thanks
If you can cope with having slightly thicker and more delicate scales, there's the Voyager Lite. Not only does it replace the mag glass with the light, it also has an alarm clock countdown timer, and all the plus scale tools on the rear scale. I agree totally with your motivation for this question, and that's what inspired me to build the Wenger mod a while back too.
Pic already used earlier in this thread, but thanks for giving me the excuse to show it again :D
-
Perfect guys. Thanks for the responses again. Feels good narrowing down the options to "the right one"

Makes sense now that the mag and in line philips are a 1-2 punch on the 91mm because of size and placement

-
Just got the explorer. Couldn't wait, had to have it!! Question, is it supposed to come with the pin needle? Mine has the spot for it, but not there. Can these be bought off the shelf to fit from a store or something, (I don't have any laying around to try.)
-
@kaput said:
Just got the explorer. Couldn't wait, had to have it!! Question, is it supposed to come with the pin needle? Mine has the spot for it, but not there. Can these be bought off the shelf to fit from a store or something, (I don't have any laying around to try.)Congratulations on your first Explorer! Both of my original Explorer Plus purchases from Amazon came with the pin in place but with all my many purchases both new and used (just purchased my 25th Explorer), it is a coin toss as to whether an Explorer will arrive with a pin or not. Older models had scales with no hole for the pin. Newer ones are likely to have the hole. I mostly ignore the pins since I don't really have a use for one but I imagine that most pins available in stores will fit.
Jim
-
Just got the explorer. Couldn't wait, had to have it!! Question, is it supposed to come with the pin needle? Mine has the spot for it, but not there. Can these be bought off the shelf to fit from a store or something, (I don't have any laying around to try.)
Congratulations on your first Explorer! Both of my original Explorer Plus purchases from Amazon came with the pin in place but with all my many purchases both new and used (just purchased my 25th Explorer), it is a coin toss as to whether an Explorer will arrive with a pin or not. Older models had scales with no hole for the pin. Newer ones are likely to have the hole. I mostly ignore the pins since I don't really have a use for one but I imagine that most pins available in stores will fit.
Jim
Got an Explorer myself recently.
It came without pin but with the hole. I know from past experience that a variety of pins will fit.To be honest though, it's not really the SAK for me :(
Maybe when I get older and actualy need the mag glas to read small writing...

Edit: it's an ad knife with a metal inlayed ad for a Swiss paper-machine company, complete with company name and logo, Vic shield on backside.
-
I've already used the mag glass on a couple occasions. One to read a serial number, again to inspect another knife. Very cool! 8)
-
@kaput said:
Just got the explorer. Couldn't wait, had to have it!! Question, is it supposed to come with the pin needle? Mine has the spot for it, but not there. Can these be bought off the shelf to fit from a store or something, (I don't have any laying around to try.)I belive that the pin only comes with the plus model. But go to the nearest sewing chop and by a case really cheap. At least that what I did. It is a spartan in the picture but also the pins I use for all of my SAK's

[It's not failure if you learn something from it]
-
Mine isn't the Plus model, but it does have the pin hole. Bought it used/like new, but came with no pin. Strangely, one went missing from my wife's sewing kit

-
Mine too Wolfy!!!
-
Just got the explorer. Couldn't wait, had to have it!! Question, is it supposed to come with the pin needle? Mine has the spot for it, but not there. Can these be bought off the shelf to fit from a store or something, (I don't have any laying around to try.)
I belive that the pin only comes with the plus model. But go to the nearest sewing chop and by a case really cheap. At least that what I did. It is a spartan in the picture but also the pins I use for all of my SAK's

[It's not failure if you learn something from it]
I saw that. Went into Michaels hobby store and they have a box of a thousand for like $5... but I only need 1! And the need is subjective at this point. Although I'd like to have it.
-
Just got the explorer. Couldn't wait, had to have it!! Question, is it supposed to come with the pin needle? Mine has the spot for it, but not there. Can these be bought off the shelf to fit from a store or something, (I don't have any laying around to try.)
I belive that the pin only comes with the plus model. But go to the nearest sewing chop and by a case really cheap. At least that what I did. It is a spartan in the picture but also the pins I use for all of my SAK's

[It's not failure if you learn something from it]
I saw that. Went into Michaels hobby store and they have a box of a thousand for like $5... but I only need 1! And the need is subjective at this point. Although I'd like to have it.
I know the feeling.. My box was cheaper, but then I have extra [emoji12]
[It's not failure if you learn something from it]
-
I had to buy a couple of dress shirts. Between the two there were about 8 of these pins that fit perfectly.

-
Just got the explorer. Couldn't wait, had to have it!! Question, is it supposed to come with the pin needle? Mine has the spot for it, but not there. Can these be bought off the shelf to fit from a store or something, (I don't have any laying around to try.)
I belive that the pin only comes with the plus model. But go to the nearest sewing chop and by a case really cheap. At least that what I did. It is a spartan in the picture but also the pins I use for all of my SAK's

[It's not failure if you learn something from it]
I saw that. Went into Michaels hobby store and they have a box of a thousand for like $5... but I only need 1! And the need is subjective at this point. Although I'd like to have it.
If your wife/girlfriend/sister/aunt has a sewing kit, ask for one of their straight pins...it will work.

-
+1. The only Vic pin I have is the one that came with my Swisschamp.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login