Appreciation for the Explorer
-
@kaput said:
Silly question coming at y'all.Do they make a similar tool to the explorer with something else in the place of the magnifying glass?
Mainly concerned with having the 3 under tools, knife scissors, and especially having the philips out the front.
Thanks
If you can cope with having slightly thicker and more delicate scales, there's the Voyager Lite. Not only does it replace the mag glass with the light, it also has an alarm clock countdown timer, and all the plus scale tools on the rear scale. I agree totally with your motivation for this question, and that's what inspired me to build the Wenger mod a while back too.
Pic already used earlier in this thread, but thanks for giving me the excuse to show it again :D
-
Perfect guys. Thanks for the responses again. Feels good narrowing down the options to "the right one"

Makes sense now that the mag and in line philips are a 1-2 punch on the 91mm because of size and placement

-
Just got the explorer. Couldn't wait, had to have it!! Question, is it supposed to come with the pin needle? Mine has the spot for it, but not there. Can these be bought off the shelf to fit from a store or something, (I don't have any laying around to try.)
-
@kaput said:
Just got the explorer. Couldn't wait, had to have it!! Question, is it supposed to come with the pin needle? Mine has the spot for it, but not there. Can these be bought off the shelf to fit from a store or something, (I don't have any laying around to try.)Congratulations on your first Explorer! Both of my original Explorer Plus purchases from Amazon came with the pin in place but with all my many purchases both new and used (just purchased my 25th Explorer), it is a coin toss as to whether an Explorer will arrive with a pin or not. Older models had scales with no hole for the pin. Newer ones are likely to have the hole. I mostly ignore the pins since I don't really have a use for one but I imagine that most pins available in stores will fit.
Jim
-
Just got the explorer. Couldn't wait, had to have it!! Question, is it supposed to come with the pin needle? Mine has the spot for it, but not there. Can these be bought off the shelf to fit from a store or something, (I don't have any laying around to try.)
Congratulations on your first Explorer! Both of my original Explorer Plus purchases from Amazon came with the pin in place but with all my many purchases both new and used (just purchased my 25th Explorer), it is a coin toss as to whether an Explorer will arrive with a pin or not. Older models had scales with no hole for the pin. Newer ones are likely to have the hole. I mostly ignore the pins since I don't really have a use for one but I imagine that most pins available in stores will fit.
Jim
Got an Explorer myself recently.
It came without pin but with the hole. I know from past experience that a variety of pins will fit.To be honest though, it's not really the SAK for me :(
Maybe when I get older and actualy need the mag glas to read small writing...

Edit: it's an ad knife with a metal inlayed ad for a Swiss paper-machine company, complete with company name and logo, Vic shield on backside.
-
I've already used the mag glass on a couple occasions. One to read a serial number, again to inspect another knife. Very cool! 8)
-
@kaput said:
Just got the explorer. Couldn't wait, had to have it!! Question, is it supposed to come with the pin needle? Mine has the spot for it, but not there. Can these be bought off the shelf to fit from a store or something, (I don't have any laying around to try.)I belive that the pin only comes with the plus model. But go to the nearest sewing chop and by a case really cheap. At least that what I did. It is a spartan in the picture but also the pins I use for all of my SAK's

[It's not failure if you learn something from it]
-
Mine isn't the Plus model, but it does have the pin hole. Bought it used/like new, but came with no pin. Strangely, one went missing from my wife's sewing kit

-
Mine too Wolfy!!!
-
Just got the explorer. Couldn't wait, had to have it!! Question, is it supposed to come with the pin needle? Mine has the spot for it, but not there. Can these be bought off the shelf to fit from a store or something, (I don't have any laying around to try.)
I belive that the pin only comes with the plus model. But go to the nearest sewing chop and by a case really cheap. At least that what I did. It is a spartan in the picture but also the pins I use for all of my SAK's

[It's not failure if you learn something from it]
I saw that. Went into Michaels hobby store and they have a box of a thousand for like $5... but I only need 1! And the need is subjective at this point. Although I'd like to have it.
-
Just got the explorer. Couldn't wait, had to have it!! Question, is it supposed to come with the pin needle? Mine has the spot for it, but not there. Can these be bought off the shelf to fit from a store or something, (I don't have any laying around to try.)
I belive that the pin only comes with the plus model. But go to the nearest sewing chop and by a case really cheap. At least that what I did. It is a spartan in the picture but also the pins I use for all of my SAK's

[It's not failure if you learn something from it]
I saw that. Went into Michaels hobby store and they have a box of a thousand for like $5... but I only need 1! And the need is subjective at this point. Although I'd like to have it.
I know the feeling.. My box was cheaper, but then I have extra [emoji12]
[It's not failure if you learn something from it]
-
I had to buy a couple of dress shirts. Between the two there were about 8 of these pins that fit perfectly.

-
Just got the explorer. Couldn't wait, had to have it!! Question, is it supposed to come with the pin needle? Mine has the spot for it, but not there. Can these be bought off the shelf to fit from a store or something, (I don't have any laying around to try.)
I belive that the pin only comes with the plus model. But go to the nearest sewing chop and by a case really cheap. At least that what I did. It is a spartan in the picture but also the pins I use for all of my SAK's

[It's not failure if you learn something from it]
I saw that. Went into Michaels hobby store and they have a box of a thousand for like $5... but I only need 1! And the need is subjective at this point. Although I'd like to have it.
If your wife/girlfriend/sister/aunt has a sewing kit, ask for one of their straight pins...it will work.

-
+1. The only Vic pin I have is the one that came with my Swisschamp.
-
Red/white I'm liking it better than black/white :D


-
Is this the perfect SAK? (For me) It's seems to be! I love every tool on this, I don't have a big use for a tiny saw (don't even care for them on my LMs)
I love this toolset and size. I feel like I found the one

Or has this already been established as such? Lol
-
Carried it today and still don't get the Explorer.
A Ranger is like 1mm thicker but adds so much more usefullness for me. Going to look for one of those I think. Or maybe a Master Craftsman. -
@Mechanickal said:
Carried it today and still don't get the Explorer.
A Ranger is like 1mm thicker but adds so much more usefullness for me. Going to look for one of those I think. Or maybe a Master Craftsman.I think it's more about the feeling than anything else... I feel the whole MG family is too cool... Scientist, yeoman, passenger, Explorer... Awl so rad.
-
@Mechanickal said:
Carried it today and still don't get the Explorer.
A Ranger is like 1mm thicker but adds so much more usefullness for me. Going to look for one of those I think. Or maybe a Master Craftsman.Victorinox has produced and is still producing such a wonderful and wide variety of Swiss Army Knives that there is bound to be a good fit for most everybody. This is definitely not a case of one size fits all!
The Explorer is a great match for me with its tool set and the magnifier comes in handy for reading small print. If a wood or metal saw/file is needed that the Explorer is not the best fit.
I am obviously biased in favor of the Explorer and my count is now up to 27.

Here is the Explorer accompanying my Swiss Champ today...
Sapphire Explorer - Emerald Swiss Champ by NorCal Jim, on Flickr -
@Mechanickal said:
Carried it today and still don't get the Explorer.
A Ranger is like 1mm thicker but adds so much more usefullness for me. Going to look for one of those I think. Or maybe a Master Craftsman.The files nice, the saw I already touched on briefly, these saws this size are just ok imo. But no out the front philips, or magnifying glasses... the out the front philips really is a great great feature and is proving to be amazingly useful on a SAK. All my Leathermans have a saw and file anywhoo , so there's that. But yeah they make enough to fit everyone's needs ultimately. And if not, that's why there's modders modding
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login