Supertool 300 VX upgrade (Mod badge request too)
-
Close up of side opposite small bit driver:

Sent on my SM-G930F with Tapatalk
-
cool idea
now i can use that on Blave and ReBlaster XXX -
excellent work, DT!

I am just now seeing this thread for the first time, and I am thoroughly impressed.

one question about the solution you came up with for the small bit driver... does it rotate around the pivot at all, or does it stay in place pretty well? it almost looks like the tool might benefit from a similar shaped block on the other pivot as well to hold it in place when the straight edges line up.
Thanks! The small bit driver sits pretty tight. You'd have to use more force than you'd likely use on a small screw to pivot it. But the counterblock is a good idea... I have a washer there, ground off to face the handle slope to inhibit rotation on that side.
Looks great... really nice work

you're probably right about the amount of force it would take to actually cause the small bit driver to rotate while you're using it... but I figured it was still worth asking about. ;)
-
Blave with Mini Bits
Thank Boss


-
@Obi1shinobee said:
Blave with Mini Bits
Thank Boss

Ah, you left it pivotable did you? Nice
and you're very welcome! I wanted it smaller, compact and fixed - on the few occasions I'll likely be using the small driver, I'll get it out of the bit card and insert it in the ST.Sent on my SM-G930F with Tapatalk
-
Blave with Mini Bits :multi: :multi: :multi: Thank Boss :cheers: :cheers: :cheers:
Ah, you left it pivotable did you? Nice :like: and you're very welcome! I wanted it smaller, compact and fixed - on the few occasions I'll likely be using the small driver, I'll get it out of the bit card and insert it in the ST.
Sent on my SM-G930F with Tapatalk
Yes i can move in and out easy.. NOW FOR HAMMER TIME MODS................ :ahhh :ahhh :ahhh :ahhh
- YouTube
Auf YouTube findest du die angesagtesten Videos und Tracks. Außerdem kannst du eigene Inhalte hochladen und mit Freunden oder gleich der ganzen Welt teilen.
(www.youtube.com)
-
Planning a hammer, or something else?

Sent on my SM-G930F with Tapatalk
-
@Dutch_Tooler said:
Planning a hammer, or something else?

Sent on my SM-G930F with Tapatalk
Yes HAMMER TIME !!!!!!!!!!!!!!

-
I will add mini bits infront like ur ST300VX and add another Knife on it. muahahahaha MORE DEADLY


-
Or Marlins Spike :ahhh :ahhh :ahhh


-
@Obi1shinobee said:
I will add mini bits infront like ur ST300VX and add another Knife on it. muahahahaha MORE DEADLY

@Obi1shinobee said:
Or Marlins Spike :ahhh :ahhh :ahhh

or: both?` 
-
Yet more versatility added. Inspired by a post I read somewhere here in which someone added tweezers and toothpick in scales added to a Wave or Charge I decided to design scales for the ST 300 VX and fire up my trusty 3D printer.
The scales are, for now, of ABS and stuck to the handles with automotive grade double sided tape. Depending on experiences gained I may convert the material and the fixing method as needed. Shapeways does pretty nifty metal 3D printing jobs, so that is a possible option.
I have added the scales on both handles so I have some empty slots, which I plan to fill with Firefly ferro rods once they are brought out.


Sent on my SM-G930F with Tapatalk
-
@Dutch_Tooler said:
Yet more versatility added. Inspired by a post I read somewhere here in which someone added tweezers and toothpick in scales added to a Wave or Charge I decided to design scales for the ST 300 VX and fire up my trusty 3D printer.The scales are, for now, of ABS and stuck to the handles with automotive grade double sided tape. Depending on experiences gained I may convert the material and the fixing method as needed. Shapeways does pretty nifty metal 3D printing jobs, so that is a possible option.
I have added the scales on both handles so I have some empty slots, which I plan to fill with Firefly ferro rods once they are brought out.


Sent on my SM-G930F with Tapatalk
send me one

-
Yet more versatility added. Inspired by a post I read somewhere here in which someone added tweezers and toothpick in scales added to a Wave or Charge I decided to design scales for the ST 300 VX and fire up my trusty 3D printer.
The scales are, for now, of ABS and stuck to the handles with automotive grade double sided tape. Depending on experiences gained I may convert the material and the fixing method as needed. Shapeways does pretty nifty metal 3D printing jobs, so that is a possible option.
I have added the scales on both handles so I have some empty slots, which I plan to fill with Firefly ferro rods once they are brought out.


Sent on my SM-G930F with Tapatalk
send me one

Serious? Only fits the ST 300 (alignment ridges fall into the handle spring slots) and the rough print requires a bit of filing and sanding to make it fit...
Sent on my SM-G930F with Tapatalk
-
Word of caution: with two such scales the handle nubs on the tweezers and toothpick need filing off lest they come into conflict with any other items located on the opposite handle when the pliers are used on very thin material.
Sent on my SM-G930F with Tapatalk
-
Yet more versatility added. Inspired by a post I read somewhere here in which someone added tweezers and toothpick in scales added to a Wave or Charge I decided to design scales for the ST 300 VX and fire up my trusty 3D printer.
The scales are, for now, of ABS and stuck to the handles with automotive grade double sided tape. Depending on experiences gained I may convert the material and the fixing method as needed. Shapeways does pretty nifty metal 3D printing jobs, so that is a possible option.
I have added the scales on both handles so I have some empty slots, which I plan to fill with Firefly ferro rods once they are brought out.


Sent on my SM-G930F with Tapatalk
send me one

Serious? Only fits the ST 300 (alignment ridges fall into the handle spring slots) and the rough print requires a bit of filing and sanding to make it fit...
Sent on my SM-G930F with Tapatalk
YES im deadly seriously i got :)

-
Obi you have a PM
Sent on my SM-G930F with Tapatalk
-
@Dutch_Tooler said:
Obi you have a PMSent on my SM-G930F with Tapatalk

-
Really nice!

-
Thanks, all

Decided to take it to work today.
The compact toolbox:

The contents. Most prominently the ST 300 VX, of course.

A few remarks:
-
Whilst the scales I added seem to hold for now, this is down mainly to the central flat part which rests against the handles via double-sided tape. The lateral flat parts turn out to have less contact with the underlying metal, despite the double-sided tape present there as well. It seems in addition that this tape is subject to creep and pushed off slightly by the immense spring force of the tweezers. I need to play around with other kinds of tape. If that doesn't work out I'll have to consider other attachment methods, such as (super- or epoxy) glue, bearing in mind that I can't be too liberal applying it as I don't want to inhibit the function of the handle springs. I'd rather avoid having to drill in the handles for additional fixing points, although a small hole or two shouldn't compromise structural integrity of the handles overmuch.
-
The handle nubs of the tweezers and toothpick need filing down to become completely flush with the top surface of the scales, as I noticed when I extracted the ST from the (newly packed) holster and nearly lost the tweezers. However, as the scales are relatively flat, the ST still easily fits in the holster. Edit: in addition, the tops of the locks are now flush with the scales and not as likely to snag behind the holster liner or any other items.
Progress reports will continue!
PS. zoidberg, you have a PM
Sent on my SM-G930F with Tapatalk
-
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login