Need help finding a new work tool...
-
@ThundahBeagle said:
Except for the dedicated Philips head, everything else you describe is found on the newer Leatherman Surge. And that at least has a Philips head bit/ driver.I too prefer dedicated drivers instead of bits, however, my old Surge works pretty well. I have been able to break mine in to almost butterfly knife subtlety.
I do have a Surge and that was the closest thing I could think of as well. Mine stays in my car kit so it doesn't currently get much use but it's good to hear that they break in a bit. Mines still really stiff.
-
I moved from a Super Tool 300 to a Vic Soldier or Fireman with dedicated pliers, as well as my PocketWrench II for farm work. After the results of a family friend plus my ST300, I knew they wouldn't withstand extreme abuse (the pliers flexed on me half the time I used them).
The two pliers I find myself carrying are the Proto 267G New England Style lineman's pliers, with various needlenose, typically Channellock (E318), as well as Kraeuter and Boker USA (they had a big line of hand tools back in the '50s and '60s).
-
The WorkPro heavy duty tool meets all of your requirements. It is not the same level of quality as the LM stuff, but is a fun change at only $40. It us surprisingly strong for being a non-big name tool made overseas. It weighs about a full pound with the pouch though. :P
It also does something LM cannot do. It doubles as a stainless steel brick. :D
Edit: pic. Workpro on left.
-
@gerleatherberman said:
The WorkPro heavy duty tool meets all of your requirements. It is not the same level of quality as the LM stuff, but is a fun change at only $40. It us surprisingly strong for being a non-big name tool made overseas. It weighs about a full pound with the pouch though. :P
It also does something LM cannot do. It doubles as a stainless steel brick. :D
Edit: pic. Workpro on left.Yeah that's a great suggestion, it's got exactly what I described. I looked it up and bookmarked it. I'll have to see if I can find a place where I can put hands on one. $40 seems like it's on the high end for an off brand but if the quality is there it might be worth a try.
-
The WorkPro heavy duty tool meets all of your requirements. It is not the same level of quality as the LM stuff, but is a fun change at only $40. It us surprisingly strong for being a non-big name tool made overseas. It weighs about a full pound with the pouch though. :P
It also does something LM cannot do. It doubles as a stainless steel brick. :D
Edit: pic. Workpro on left.Yeah that's a great suggestion, it's got exactly what I described. I looked it up and bookmarked it. I'll have to see if I can find a place where I can put hands on one. $40 seems like it's on the high end for an off brand but if the quality is there it might be worth a try.
My only complaint with it, and it may break in to be smoother, is the plier pivot being a bit rough feeling. At $40 and made overseas, I needed to mention that.
I re-oiled mine, and it is still a tiny bit 'gritty' feeling. I'm sure, if I actually used it, that would ultimately resolve itself. If the tool was $30, I would not feel the need to mention it.
-
The WorkPro heavy duty tool meets all of your requirements. It is not the same level of quality as the LM stuff, but is a fun change at only $40. It us surprisingly strong for being a non-big name tool made overseas. It weighs about a full pound with the pouch though. :P
It also does something LM cannot do. It doubles as a stainless steel brick. :D
Edit: pic. Workpro on left.Yeah that's a great suggestion, it's got exactly what I described. I looked it up and bookmarked it. I'll have to see if I can find a place where I can put hands on one. $40 seems like it's on the high end for an off brand but if the quality is there it might be worth a try.
My only complaint with it, and it may break in to be smoother, is the plier pivot being a bit rough feeling. At $40 and made overseas, I needed to mention that.
I re-oiled mine, and it is still a tiny bit 'gritty' feeling. I'm sure, if I actually used it, that would ultimately resolve itself. If the tool was $30, I would not feel the need to mention it.
I have one with the same problem. I think it's their QC. The plier rivet is not perfectly round. It will constantly rub against its sides on certain angle. That's why the opening and closing is not smooth. And mine there's a teeny gap between the cutter, making cutting soft copper cables impossible. That why I am not using it. Didn't like the plier head as well. It's small as compared to the whole body to plier ratio. Knifes are not sharp out of the box, file hatching is in the wrong direction. It's really bulky and heavy. Not worth carrying imo. Honestly, I regret buying it even when I had only paid about $30usd for it.
-
Except for the dedicated Philips head, everything else you describe is found on the newer Leatherman Surge. And that at least has a Philips head bit/ driver.
I too prefer dedicated drivers instead of bits, however, my old Surge works pretty well. I have been able to break mine in to almost butterfly knife subtlety.
I do have a Surge and that was the closest thing I could think of as well. Mine stays in my car kit so it doesn't currently get much use but it's good to hear that they break in a bit. Mines still really stiff.
What you might be able to do is to swap the Surge's bit driver for the Phillips head out of a ST 300 which has the same lock form factor... just measured the latter, at the pivot it's 3.7 mm wide against the bit driver's 5 mm, however you need to try out if the Phillips stays clear of the plier head. You'd need to add a washer, and you might have to file off the small internal plier rest tab. That is, if you feel up to taking the Surge apart.
Sent on my SM-G930F with Tapatalk
-
<a href="https://flic.kr/p/qeBRzK" target="_blank" rel="noopener noreferrer"><img src="https://farm9.staticflickr.com/8598/15906672593_4cc44b4ceb.jpg" alt="banner" style="max-width: 100%; height: auto;" /></a>
<a href="https://flic.kr/p/qepwEW" target="_blank" rel="noopener noreferrer"><img src="https://farm8.staticflickr.com/7282/15904267634_b22d846c01.jpg" alt="banner" style="max-width: 100%; height: auto;" /></a>

-
@Syncop8r said:
<a href="https://flic.kr/p/qeBRzK" target="_blank" rel="noopener noreferrer"><img src="https://farm9.staticflickr.com/8598/15906672593_4cc44b4ceb.jpg" alt="banner" style="max-width: 100%; height: auto;" /></a>
<a href="https://flic.kr/p/qepwEW" target="_blank" rel="noopener noreferrer"><img src="https://farm8.staticflickr.com/7282/15904267634_b22d846c01.jpg" alt="banner" style="max-width: 100%; height: auto;" /></a>

Haha - there I went, imagining I was going where no one had gone before... not too seriously though
- pity the search doesn't work very well on Tapatalk/ the phone.
Thanks Sync, very pictorial proof it's possible
I imagine you had to file off the plier rest tab inside the handle? Just checking my 3D imaginative powers...@clown, if you want to go this way and need to source the Phillips, I'd suggest you try the occasional ebay offer, or member Loki-mobile.
-
/post/1040378
I have another (small) mod planned to make this even more functional....
-
Nope. Not telling!

-
I could only think of the Surge as well
Not thinking outside the box enough I guess :D The WorkPro does seem like worth a try but the long Phillips swap does seem like it would fit the bill more for what you are wanting 
-
I was wondering if that would work lol! Thanks for the tips guys. Sync, what modification was needed besides swapping the tools out? Grinding/drilling/spacing?
-
Breaking off the plier rest and adding a washer or two. Check the link to the thread.^^
-
Over lunch I involuntarily thought of a possible name for this sturdy version of a Surge...
Spoiler:
- the Sturge!

- the Sturge!
-
How about Phurge? (Phillips-Surge)
-
Dutch! Sync!
I like what you have done with the Surge. You have made it...perfect.
-
@ThundahBeagle said:
Dutch! Sync!I like what you have done with the Surge. You have made it...perfect.
Thanks, although my activities were purely mental at this stage. Transforming that into realtiy is becoming rather attractive, though

Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login

