Need help finding a new work tool...
-
/post/1040378
I have another (small) mod planned to make this even more functional....
-
Nope. Not telling!

-
I could only think of the Surge as well
Not thinking outside the box enough I guess :D The WorkPro does seem like worth a try but the long Phillips swap does seem like it would fit the bill more for what you are wanting 
-
I was wondering if that would work lol! Thanks for the tips guys. Sync, what modification was needed besides swapping the tools out? Grinding/drilling/spacing?
-
Breaking off the plier rest and adding a washer or two. Check the link to the thread.^^
-
Over lunch I involuntarily thought of a possible name for this sturdy version of a Surge...
Spoiler:
- the Sturge!

- the Sturge!
-
How about Phurge? (Phillips-Surge)
-
Dutch! Sync!
I like what you have done with the Surge. You have made it...perfect.
-
@ThundahBeagle said:
Dutch! Sync!I like what you have done with the Surge. You have made it...perfect.
Thanks, although my activities were purely mental at this stage. Transforming that into realtiy is becoming rather attractive, though

-
I think the only other production tool (maybe just discontinued) with all those features in one is the Gerber MP1 (by putting a PH driver bit on the exchanger)?
/topic/47327
-
@ThePeacent said:
I think the only other production tool (maybe just discontinued) with all those features in one is the Gerber MP1 (by putting a PH driver bit on the exchanger)?/topic/47327
I seriously considered the MP1 too but read too many reports of the tools being weak. Also no file on the MP1.
-
I think the only other production tool (maybe just discontinued) with all those features in one is the Gerber MP1 (by putting a PH driver bit on the exchanger)?
/topic/47327
I seriously considered the MP1 too but read too many reports of the tools being weak. Also no file on the MP1.
Despite being a fan of (some) Gerbers, I cannot recommend any which are outboard with the Saf-T-Lock system. Too many times I have found that with one implement deployed, the lock bar does not return back fully to the "home" position, leaving other tools in that handle to flop out a bit. This is not an issue withb the inboard configurations (MP 400, MP600, Diesel), and I didn't suffer it on the MP700s either, but the Strata and Fit both suffered from this. If a driver was deployed for example, a sharp tool (knife) could fall from the handle enough to risk injury. This is one of the reasons that I personally would not consider the MP1 / Shift
Have you tried a Swisstool? It doesn't have OHO, but neither does your beloved ST300
-
@50ft-trad said:
I think the only other production tool (maybe just discontinued) with all those features in one is the Gerber MP1 (by putting a PH driver bit on the exchanger)?
/topic/47327
I seriously considered the MP1 too but read too many reports of the tools being weak. Also no file on the MP1.
Despite being a fan of (some) Gerbers, I cannot recommend any which are outboard with the Saf-T-Lock system. Too many times I have found that with one implement deployed, the lock bar does not return back fully to the "home" position, leaving other tools in that handle to flop out a bit. This is not an issue withb the inboard configurations (MP 400, MP600, Diesel), and I didn't suffer it on the MP700s either, but the Strata and Fit both suffered from this. If a driver was deployed for example, a sharp tool (knife) could fall from the handle enough to risk injury. This is one of the reasons that I personally would not consider the MP1 / Shift
Have you tried a Swisstool? It doesn't have OHO, but neither does your beloved ST300
I do have both a Swisstool and a Spirit. I think they both are excellent tools and I carry them frequently when I'm not at work. The only issue I have with them is it's tough for me to get the tools out. My nails are often cut very short which makes accessing the tools a little tricky. Fine for home but a pain when on the job. I can get at the ST300 tools even with leather gloves on.
-
@50ft-trad said:
I think the only other production tool (maybe just discontinued) with all those features in one is the Gerber MP1 (by putting a PH driver bit on the exchanger)?
/topic/47327
I seriously considered the MP1 too but read too many reports of the tools being weak. Also no file on the MP1.
Despite being a fan of (some) Gerbers, I cannot recommend any which are outboard with the Saf-T-Lock system. Too many times I have found that with one implement deployed, the lock bar does not return back fully to the "home" position, leaving other tools in that handle to flop out a bit. This is not an issue withb the inboard configurations (MP 400, MP600, Diesel), and I didn't suffer it on the MP700s either, but the Strata and Fit both suffered from this. If a driver was deployed for example, a sharp tool (knife) could fall from the handle enough to risk injury. This is one of the reasons that I personally would not consider the MP1 / Shift
Have you tried a Swisstool? It doesn't have OHO, but neither does your beloved ST300
I do have both a Swisstool and a Spirit. I think they both are excellent tools and I carry them frequently when I'm not at work. The only issue I have with them is it's tough for me to get the tools out. My nails are often cut very short which makes accessing the tools a little tricky. Fine for home but a pain when on the job. I can get at the ST300 tools even with leather gloves on.

-
Dutch! Sync!
I like what you have done with the Surge. You have made it...perfect.
Thanks, although my activities were purely mental at this stage. Transforming that into realtiy is becoming rather attractive, though

You lose the ability to attach a Bit Extender HOWEVER if you attach a Removable Bit Driver to the Phillips you get the same result.

@clown said:
I don't suppose you recall what washer you used? I don't have any extra parts laying around and will have resource one from somewhere.No idea sorry. It may have been one of Zoidberg's spares.
-
Dutch! Sync!
I like what you have done with the Surge. You have made it...perfect.
Thanks, although my activities were purely mental at this stage. Transforming that into realtiy is becoming rather attractive, though

You lose the ability to attach a Bit Extender HOWEVER if you attach a Removable Bit Driver to the Phillips you get the same result.

Correct, thanks. I see my Surge as my 'tank' tool, i.e. sturdy and ready for whatever the world might throw at it, which tends to kind of 'limit' it to non-exchanger-type tools (yeah I know, there's the saw/file blade exchanger too) and that's why I can dig swapping the bit driver for the Phillips head. I happen to have a ST 300 Phillips head and a suitable removable bit driver (as a nod to flexibility) lying around unused... hmmm...
Sent on my SM-G930F with Tapatalk
-

Just pointing that out as some people LOVE their Bit Extenders. :)
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login


