Shop projects
-
I have a couple knurling tools but I have never used them on something so small.
-
@Wallace72 said:
I have a couple knurling tools but I have never used them on something so small.One thing I made back in 93 was a ballpeen hammer, so wish I still had it, but a very simple job, two pieces of steel, one like 3-4" another like 10", put a knurl as a grip, other end a threaded tip, the other piece a striking head, then other a peened head, with a hole to tap for the other piece to screw into. After cut the end a little past the head then peen the threads over. Was a fun little project, I so wish I had a lathe, I'd so like to make a bolt pen with a knurled grip!
JR -
A little Shop storage project ;)
Rescued a length of sturdy wire shelving

Chop chop

That's better :)
I was going to have it the other way up but it worked better like this

-
Very interesting! Got enough wrenches?
JR -
Ah JR, You've jumped to the conclusion that that's all of them

I might have to stop buying them now :ahhh
-
Well that’s like saying I have too many combo screwdrivers, just from looking right now I can see 3, gee now you have me sounding like my wife

JR -
Nice rack! :D
-
@MadPlumbarian said:
Well that’s like saying I have too many combo screwdrivers, just from looking right now I can see 3, gee now you have me sounding like my wife
JRYou need some sort of cunning storage system JR

:-[ :-[
:D 
-
Getting frustrated trying to see why this angle grinder won't work
[url=https://flic.kr/p/Z7upS1] -
@Wallace72 said:
Getting frustrated trying to see why this angle grinder won't workPerhaps because it's in pieces?
-
Getting frustrated trying to see why this angle grinder won't work
Perhaps because it's in pieces?

-
Getting frustrated trying to see why this angle grinder won't work
Perhaps because it's in pieces?
..You may be on to something
-
@Wallace72 said:
Getting frustrated trying to see why this angle grinder won't work
[url=https://flic.kr/p/Z7upS1]Try using a hammer. It may not fix it, but it does help with the frustration!
-
Did a continuity test and up till the two wires that separate to the field windings (cord and switch) are getting power. And the brushes seem okay but it still won't turn on.
-
@Wallace72 said:
Did a continuity test and up till the two wires that separate to the field windings (cord and switch) are getting power. And the brushes seem okay but it still won't turn on.Check the solder joints on each end of the stator. My old Milwaukee grinder had a tiny separation at one of these points. It had only about 3 hours of use before it pooped out. Resoldered and it works fine now. I did have to press the stator out before I could see the problem. I took the gear housing off, pulled out the rotor, and pushed it out from the back.
Getting it back in was a real treat. ::)
Good luck wallace! -
A little recycling
I bought these speakers second hand when I was a young apprentice for quite a lot of money, don't need them and can't even give them away (dang kids with their newfangled... )
So I cut them up and threw some paint at them,
Storage drawers for the garage

Yeh I know there's a hole in the bottom, it's for ventilation

-
Good idea!
(A town nearby has a new bus shelter, designed by architects with a big hole in the roof.
) -
Ventilation?

-
@Sparky415 said:
Ventilation?
"The hole actually represents the Māori name for the Wairau Valley, Kei puta te Wairau, which means "the place with the hole in the sky" or "the place with the hole in the cloud".
https://www.stuff.co.nz/national/97376462/council-defends-hole-in-bus-shelter-logic -
Ah, it all makes sense now :D
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login