old Champ rebuild
-
Layer 2 went well, decided to forego the extra E blade layer, the old hoss is plenty capable as is.

Finally got that broken Phillips gone! The main reason I quit carrying it. :D

-
Does the bottle opener that you are using have the locking nub?
As I see it, Vic made 3 different rests:
The one for the bottle opener with the round tang.
The one for the bottle opener with the square tang, but no nub.
The one for the bottle opener with the square tang AND nub(the most recent) -
@Pablo O'Brien said:
Does the bottle opener that you are using have the locking nub?
As I see it, Vic made 3 different rests:
The one for the bottle opener with the round tang.
The one for the bottle opener with the square tang, but no nub.
The one for the bottle opener with the square tang AND nub(the most recent)No, it's the one in the middle in the above photo showing the 3 styles, minus the keyring. The one with the nub is the newest, but I'm not sure when the change happened. I think all the versions are available both with and without keyring attachment, but have not verified the newest ones, I don't know if they even offer a no keyring option these days on models with full opener layers.

-
Layer 3 done. The pliers joint is a little loose and the teeth are not as sharp anymore, but I wanted to keep the originals, after all it's what separates the SwissChamps from the Champions! :D I got a lot of use out of these pliers and in some pretty unconventional situations, so worn or not they are staying put to keep most of the integrity of the knife intact. Same with the main blade, it needed some sharpening, but I felt if I changed it, I wouldn't be able to say it's the same knife. Something like that anyway, dunno how many parts you can change and still preserve the identity of the original. Maybe overthinking this point.

The top photo shows how to get the springs to flex for assembly, put the tool and spring together at the top where the pins have some movement, and work the whole business down to the liner. trying to wrestle the tool onto the spring at the liner is pretty difficult, esp. with the thicker ones.



-
I prefer to drop the spring and tool down, then the next liner, before I "seat" and tension the tool on the spring with something like a mini screwdriver.
I find that omitting the liner can cause the pin stock to bend sometimes, but that may be due to incorrect technique.
-
Here's a shot of how cruddy the innards on these get after 5 or 6 years of daily use and only moderate maintenance, and then sitting for almost 20 years. :ahhh

-
@Pablo O'Brien said:
I prefer to drop the spring and tool down, then the next liner, before I "seat" and tension the tool on the spring with something like a mini screwdriver.
I find that omitting the liner can cause the pin stock to bend sometimes, but that may be due to incorrect technique.
I have done that on short pin mods, but working them down together is much easier if you have long enough pins.

-
This is brilliant Twigs! It looks like you are taking your time with the build and doing it nice and calmly.

Thanks for the pics.

-
Layer 4 done, new scissors, same old hook. Layer 4 1/2 was another slight problem, after I used some of the tools for mods, I tried to drill the rest of the pin out, and it was just the right size to snap off when it galled in the fish tool spring. I thought it would let go when I disassembled it, but noooooo... Vise grips didn't work, hammer didn't work, and I didn't want to try to drill it again. I had a spare so it will actually have 2 new springs (so far). :ahhh

-
Stretch it so it thins? :P
-
Layer 5 done with new saw.


-
Layer 6 with new style file! :D

-
Shiny.

-
Last one will have to wait. The main blade is in really good shape and sharp now, hard to see how bad the small blade is in pictures. I never used it as a prybar or screwdriver, but it's pretty thrashed. The liner is bent, so only using the main blade, spacer and original corkscrew from this layer. Amazing how useful it still was after all the carry and use it got. If the inline driver had not broken, no telling how long I would have carried it, a few more years I think, it was a quite a while after that I started collecting. Been meaning to rebuild it for years, finally... :)

-
This has been an excellent read
Only getting to it now or I would have posted earlier
Thanks for the step by step and all the pics

Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login

