OHT owners club!
-
I have tried that method as well and still can only get it part of the way out :ahhh I need to carry it this week to work and keep trying to flick it and maybe that will loosen it up a bit

-
I usually just hold in the buttons on the sides to deploy the pliers, unless I'm in a hurry. Usually you can get that to work with both Gerber and Leatherman mts.

-
On the OHT, do unlock the slider before trying to flick.
The Gerbers do not have slide lock do they? My Diesel does not.Sent from my iPhone using Tapatalk
-
Do you mean the little lock that twists?
-
Hi guys!! Just picked up my new BO OHT, really nice tool!! But mine has the plier's head a little bit off center...not perfectly aligned, like someone has abused it. The tool is brand new... can i fix it myself? Or better ignore it and go on?
-
Apparently that is common with these... mine are a tiny bit off-centre but the bigger issue is the replaceable cutters don't quite meet.
You could try the punch into the plier pivot method but looks hard to do on these without dismantling.
-
How bad is it? Pics?
-
Mine is the same, can move from being aligned to offset by the amount you have there. Do the cutters meet? If not, there is a workaround....
I would just live with it but then it's probably much more of a hassle for me to send back than it is for you.
Others may have other ideas/opinions.... -
Sending back is a waste of time. Sent my first OHT back twice. Each time had new pliers. Both replacement pliers had the exact issue. However, the last pliers meet up well enough that they don't cross over when twisting medium duty wire. My BO OHT I got recently pliers were excellent though. Not perfect, but close! LM just said "smurf it" when designing the OHT. IMHO. The plier tolerance isn't my only beef with them either, but I won't go there. $80+ tools should be better than that.
-
@gerleatherberman said:
The plier tolerance isn't my only beef with them either, but I won't go there. $80+ tools should be better than that.Actually I would be interested to hear what else is your beef. The plier tips/cutter alignment is the only issue on mine.
-
@gerleatherberman said:
The plier tolerance isn't my only beef with them either, but I won't go there. $80+ tools should be better than that.Actually I would be interested to hear what else is your beef. The plier tips/cutter alignment is the only issue on mine.
Let's see.
Flimsy handle scales.
Tools drag on said scales.
Ridiculous twist lock mechanism that has no positive positioning, so you can turn it and not know.
Plier spring system makes tool bulkier than necessary. It didn't need to be spring loaded. IMO.
Excessive hot spots when squeezing handles.
Can opener could have been nixed, small flat head put in its' place and much longer main blade could have filled an entire 'slot'.
Plier jaws only meet at the far tips. Holding thin stuff is not practical/possible.
No practical bit kit options.
Standard "molle" sheath is junk. The edge liner at the top tears within days.But, on the flip side.
It is a good looking tool.
It is truly OHO all around, although best for us ambidextrous people.
Good driver shapes, even the '2d' phillips.
Strap cutter is fantastic.
Saw works well for the length.
Both blades insanely sharp and easy to resharpen.
Positive and strong tool lockup and closure with liner locks.I am not a hater, but LM could have done a whole lot better with the OHT.
I own two OHTs and don't plan on getting rid of them. They make a great show-off tools. :)
-
OK so a mix of bad quality control and design features you don't agree with (which I do ;) )
-
That is pretty much the TLDR of the rant I posted. Thank you. :)
But, like I mentioned, some of the things about the OHT are cool. Overall I have been spoiled rotten with tools such as the LM Surge/Wave, Vic SwissTool/Spirit, Gerber CD, &MP1. All of which I have gripes about too.
However, with that being said, the OHT is a very good looking tool that many find more than adequate for their needs.
-
Punch to the pivot method? How can i do it?
-
@Bancomat85 said:
Punch to the pivot method? How can i do it?I personally wouldn't bother because the slightly loose pliers give the spring room to function.
But if you must, pop off the two retaining link clips and remove the plier head.
Place one side of the plier pivot against something hard and hit the other side with a punch. -
Overall, if I could find one on clearance or trade a few unused MTs away, OHT owners, would it be worth it?
-
I don't regret mine. Love the look of the BO version most.
I haven't used it much but it has great fiddle-factor. :DHere's my 2c on your thoughts about it's shortcomings GLBM:
Flimsy handle scales. - Mine seem fine.
Tools drag on said scales. - Not an issue on mine.
Ridiculous twist lock mechanism that has no positive positioning, so you can turn it and not know. - Hasn't been a problem for me, although I tend to not lock it.
Plier spring system makes tool bulkier than necessary. It didn't need to be spring loaded. IMO. - I LOVE that the pliers are spring-action.
Excessive hot spots when squeezing handles. - I found the handles really comfortable.
Can opener could have been nixed, small flat head put in its' place and much longer main blade could have filled an entire 'slot'. - I think being aimed at military it needed to have a can opener.
Plier jaws only meet at the far tips. Holding thin stuff is not practical/possible. - I think there is a good reason for that... explained on another thread.
No practical bit kit options. - True, but I think it's meant to be self-contained multitool.
Standard "molle" sheath is junk. The edge liner at the top tears within days. - True, the pocket part especially. I also think it's a litttle too small for the OHT which doesn't help.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login

