OHT owners club!
-
Hi guys!! Just picked up my new BO OHT, really nice tool!! But mine has the plier's head a little bit off center...not perfectly aligned, like someone has abused it. The tool is brand new... can i fix it myself? Or better ignore it and go on?
-
Apparently that is common with these... mine are a tiny bit off-centre but the bigger issue is the replaceable cutters don't quite meet.
You could try the punch into the plier pivot method but looks hard to do on these without dismantling.
-
How bad is it? Pics?
-
Mine is the same, can move from being aligned to offset by the amount you have there. Do the cutters meet? If not, there is a workaround....
I would just live with it but then it's probably much more of a hassle for me to send back than it is for you.
Others may have other ideas/opinions.... -
Sending back is a waste of time. Sent my first OHT back twice. Each time had new pliers. Both replacement pliers had the exact issue. However, the last pliers meet up well enough that they don't cross over when twisting medium duty wire. My BO OHT I got recently pliers were excellent though. Not perfect, but close! LM just said "smurf it" when designing the OHT. IMHO. The plier tolerance isn't my only beef with them either, but I won't go there. $80+ tools should be better than that.
-
@gerleatherberman said:
The plier tolerance isn't my only beef with them either, but I won't go there. $80+ tools should be better than that.Actually I would be interested to hear what else is your beef. The plier tips/cutter alignment is the only issue on mine.
-
@gerleatherberman said:
The plier tolerance isn't my only beef with them either, but I won't go there. $80+ tools should be better than that.Actually I would be interested to hear what else is your beef. The plier tips/cutter alignment is the only issue on mine.
Let's see.
Flimsy handle scales.
Tools drag on said scales.
Ridiculous twist lock mechanism that has no positive positioning, so you can turn it and not know.
Plier spring system makes tool bulkier than necessary. It didn't need to be spring loaded. IMO.
Excessive hot spots when squeezing handles.
Can opener could have been nixed, small flat head put in its' place and much longer main blade could have filled an entire 'slot'.
Plier jaws only meet at the far tips. Holding thin stuff is not practical/possible.
No practical bit kit options.
Standard "molle" sheath is junk. The edge liner at the top tears within days.But, on the flip side.
It is a good looking tool.
It is truly OHO all around, although best for us ambidextrous people.
Good driver shapes, even the '2d' phillips.
Strap cutter is fantastic.
Saw works well for the length.
Both blades insanely sharp and easy to resharpen.
Positive and strong tool lockup and closure with liner locks.I am not a hater, but LM could have done a whole lot better with the OHT.
I own two OHTs and don't plan on getting rid of them. They make a great show-off tools. :)
-
OK so a mix of bad quality control and design features you don't agree with (which I do ;) )
-
That is pretty much the TLDR of the rant I posted. Thank you. :)
But, like I mentioned, some of the things about the OHT are cool. Overall I have been spoiled rotten with tools such as the LM Surge/Wave, Vic SwissTool/Spirit, Gerber CD, &MP1. All of which I have gripes about too.
However, with that being said, the OHT is a very good looking tool that many find more than adequate for their needs.
-
Punch to the pivot method? How can i do it?
-
@Bancomat85 said:
Punch to the pivot method? How can i do it?I personally wouldn't bother because the slightly loose pliers give the spring room to function.
But if you must, pop off the two retaining link clips and remove the plier head.
Place one side of the plier pivot against something hard and hit the other side with a punch. -
Overall, if I could find one on clearance or trade a few unused MTs away, OHT owners, would it be worth it?
-
I don't regret mine. Love the look of the BO version most.
I haven't used it much but it has great fiddle-factor. :DHere's my 2c on your thoughts about it's shortcomings GLBM:
Flimsy handle scales. - Mine seem fine.
Tools drag on said scales. - Not an issue on mine.
Ridiculous twist lock mechanism that has no positive positioning, so you can turn it and not know. - Hasn't been a problem for me, although I tend to not lock it.
Plier spring system makes tool bulkier than necessary. It didn't need to be spring loaded. IMO. - I LOVE that the pliers are spring-action.
Excessive hot spots when squeezing handles. - I found the handles really comfortable.
Can opener could have been nixed, small flat head put in its' place and much longer main blade could have filled an entire 'slot'. - I think being aimed at military it needed to have a can opener.
Plier jaws only meet at the far tips. Holding thin stuff is not practical/possible. - I think there is a good reason for that... explained on another thread.
No practical bit kit options. - True, but I think it's meant to be self-contained multitool.
Standard "molle" sheath is junk. The edge liner at the top tears within days. - True, the pocket part especially. I also think it's a litttle too small for the OHT which doesn't help. -
@Syncop8r said:
I don't regret mine. Love the look of the BO version most.
I haven't used it much but it has great fiddle-factor. :DHere's my 2c on your thoughts about it's shortcomings GLBM:
Flimsy handle scales. - Mine seem fine.
Tools drag on said scales. - Not an issue on mine.
Ridiculous twist lock mechanism that has no positive positioning, so you can turn it and not know. - Hasn't been a problem for me, although I tend to not lock it.
Plier spring system makes tool bulkier than necessary. It didn't need to be spring loaded. IMO. - I LOVE that the pliers are spring-action.
Excessive hot spots when squeezing handles. - I found the handles really comfortable.
Can opener could have been nixed, small flat head put in its' place and much longer main blade could have filled an entire 'slot'. - I think being aimed at military it needed to have a can opener.
Plier jaws only meet at the far tips. Holding thin stuff is not practical/possible. - I think there is a good reason for that... explained on another thread.
No practical bit kit options. - True, but I think it's meant to be self-contained multitool.
Standard "molle" sheath is junk. The edge liner at the top tears within days. - True, the pocket part especially. I also think it's a litttle too small for the OHT which doesn't help.I am curious and no offense intended. And I thank you for the rebuttle. But, have you tried to EDC your OHT? I thought it was the bee's knees until I carried it a couple of weeks. That is when the handle scale/drag issues and grip discomfort became obvious. My plier lock remained off, but just putting it in the sheath would twist it sometimes. Absolutely no positive positioning on either of my OHTs plier locks. It was always a mystery if the pliers would flik out or not, because of it. I can remedy some of the issues, but I don't personally recommend the OHT at $80. My personal opinion is that there are several MTs in the price range that are superior.
But, in the end, MT assertions are mostly opinion/subjective observation really. I did not intend(or desire) to have an OHT debate, because it is all so subjective, but *you * asked me and I replied. :P
-
Sorry for turning it into a debate! I'm not questioning your experiences, as you have said I asked for yours, and I have given mine. I'm just interested in others' points of view (and why they are different to mine!).

@gerleatherberman said:
But, have you tried to EDC your OHT?No to be fair I haven't. So I perhaps I would agree with you if I had.

I often wonder about a pocket clip on the OHT...
-
@Syncop8r said:
Sorry for turning it into a debate! I'm not questioning your experiences, as you have said I asked for yours, and I have given mine. I'm just interested in others' points of view (and why they are different to mine!).
@gerleatherberman said:
But, have you tried to EDC your OHT?No to be fair I haven't. So I perhaps I would agree with you if I had.

I often wonder about a pocket clip on the OHT...
It's all good.

It is important in the big MT picture that everyone voices their experiences. If it weren't for MT.O, I would still be using a Gerber pinchy and probably having my hand removed from persistent palm trauma.The OHT has some cool things going on. And admittedly, I tend to be overly critical about MTs.
A pocket clip could be kind of neat. Looking at mine, the clip could possibly be installed by drilling out the handle pivot and using a new peen rivet to attach a pocket clip. Tricky part would be where to secure it on the out-facing scale below the bypass area. Looks like there is a space to create a lock point behind where the lg. flat head (one side) or phillips (other side) fold in. There is enough scale room for this in theory. This would allow a pretty deep ride in theory. Maybe one of the mod pros on here could chime in. I did look at plier clearance and see no reason this couldn't work. :ahhh -
I'm looking at the other end, secured by the pivot, passing through the hole at the top (or is it the bottom?) then folding down...
I like MTs primarily for their gadgetiness rather than their actual usefulness to me. Otherwise NONE of them would be worth the money (to me).

Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login

