I'm cool now.... sort of...
-
from the pics I wouldn't have even thought that it could be a knockoff
-
Indeed... so Grant, how sure are you this is a knockoff? Or is it the real thing that somehow fell off the back of a truck??
Sent on my SM-G930F with Tapatalk
-
I bought it from a well known Chinese retailer for $50. If it's not a knockoff then I want to know how to contact their suppliers because I would buy Leatherman products by the truckload to resell.
Dealer cost on the Tread is significantly higher than what I paid for this one, so between cost and where I got it from I have to believe that it wasn't painstakingly crafted in Oregon.
The thing is, with the box, the instructions etc..... everything appears so authentic that some unscrupulous person could buy these by the case and unload them for $175 or so on eBay and people would think it was real. I just wish I was unscrupulous like that, but us nice guys finish last....
Def
-
I've red reports here of people experiencing rust and corrosion on their Tread after just a few months.
So if this one does that too, it'll appear even more genuine

-
I'll post up pictures of my BO Tread for comparison. That one looks really good.
-
@Mechanickal said:
I've red reports here of people experiencing rust and corrosion on their Tread after just a few months.So if this one does that too, it'll appear even more genuine

I sorta do the same thing with Vics. But instead of rust, I wait for something to bust on them. Usually the scissor springs, can opener tip pr plier jaws.

Joking aside, you could have fooled me. I thought it was real. But then I never have handled a tread before. -
I wore my tread yesterday but it's not on me right now. All I can tell from photos is some machining might be like rough compared to the original. I'll check when I get home and let you know.
-
Not to cast aspersions, however, when a "knockoff" of this quality and detail presents itself, I look back to my manufacturing background, limited though it was.
I fear that a higher percentage of this product is being fabricated overseas than the Brand would have us believe
While I have no original with which to compare, the likelihood that this Chinese connection is actually an OEM manufacturer who is allowing product out the back door seems suspiciously high to me. That explains the quality, detail, and ability to sell for less than wholesale.
-
A knockoff is a rough and similar but different, immitation of something. Like your cheap and cheerful Chevy Avalanche non-PST. We know it isn't the real deal, and they don't pretend to be. But they offer a similar widget that does about the same thing for less money. Think Pop-Tarts vs grocery store brand fruit-filled toaster pastries.
What you have here, is a counterfeit.
Totally different animal. It should be traced back, in my opinion. If we think about it and work this backwards, this is likely a partner of Leatherman who is breaking a contract. Additionally, had any of us purchased this at the normal price and under the auspices of this being genuine, it seems we may not have known any better and could have been taken for a ride
-
In your sixth photo, see the area around the wording "1/4 square" , how the material is crazed, or scarred. This may have been a QC reject for cosmetic reasons, and they sent it out the back.
-
:o That sure looks very close to me :ahhh I did have a SS Tread in possesion for a while but traded it off as it really wasn't me :D I wished I had taken more pics of it though
I would like to see this side by side with a genuine Tread though 
-
I wonder if Leatherman could tell the difference if you found "an issue" with it and sent it 'back' to them (and you didn't tick the "Sentimental" box)...
>:D -
Checking my Tread tonight I see there are differences although slight the may be. Most of its manufacturing marks, things not being as crisp or finished to the the level it's supposed to be. It's a good copy for sure; the Tread is made from 17-6 stainless and we don't know what this one is made from. I wonder what the weight on yours is with all the links versus a legit copy. One way they tell folks to know if yours is the real deal or a copy is the one from Leatherman has one ball bearing for retention but the fake one has 2 of them.
Sent from my SM-T377V using Tapatalk
-
@Grant Lamontagne said:


Maybe I'm just not familiar with LM Quality, but I immediately thought FAKE!
I mean looking at the cap lifter, on the back side it is un-even and the R2 stamp on the left is really badly done. On the front where the writing is, it looks very rough and above the E from Square it looks like its damaged. The linking bridges too look not as smooth as I would want them to be.
-
@ThundahBeagle said:
A knockoff is a rough and similar but different, immitation of something. Like your cheap and cheerful Chevy Avalanche non-PST. We know it isn't the real deal, and they don't pretend to be. But they offer a similar widget that does about the same thing for less money. Think Pop-Tarts vs grocery store brand fruit-filled toaster pastries.What you have here, is a counterfeit.
Totally different animal. It should be traced back, in my opinion. If we think about it and work this backwards, this is likely a partner of Leatherman who is breaking a contract. Additionally, had any of us purchased this at the normal price and under the auspices of this being genuine, it seems we may not have known any better and could have been taken for a ride
Yep, it is. I think this should be reported
-
So are treads made in china
there very expensive if thats the case,i dont wear bracelets etc ,just a watch and wedding ring, in my job your not aloud to wear even a watch due to hygiene, personaly I find these things a bit of a gimmick and not very funtional in some situations ,to me it's a back up thing and a bulky one at that , I handled one in a shop and instantly disliked it ,but each to your own 
-
@ThundahBeagle said:
A knockoff is a rough and similar but different, immitation of something. Like your cheap and cheerful Chevy Avalanche non-PST. We know it isn't the real deal, and they don't pretend to be. But they offer a similar widget that does about the same thing for less money. Think Pop-Tarts vs grocery store brand fruit-filled toaster pastries.What you have here, is a counterfeit.
Totally different animal. It should be traced back, in my opinion. If we think about it and work this backwards, this is likely a partner of Leatherman who is breaking a contract. Additionally, had any of us purchased this at the normal price and under the auspices of this being genuine, it seems we may not have known any better and could have been taken for a ride
I absolutely will report it to Leatherman, however there's not much they can do about these kinds of things. The thing you have to remember is that US Patents don't apply in China, and any attempts to sue will be costly and result in absolutely nothing happening.
Def
-
@ThundahBeagle said:
In your sixth photo, see the area around the wording "1/4 square" , how the material is crazed, or scarred. This may have been a QC reject for cosmetic reasons, and they sent it out the back.And there's a glob of black paint on the bottle opener in the picture above it. I have gotten Leatherman models with worse QC than that.
Def
-
@David Bowen said:
Checking my Tread tonight I see there are differences although slight the may be. Most of its manufacturing marks, things not being as crisp or finished to the the level it's supposed to be. It's a good copy for sure; the Tread is made from 17-6 stainless and we don't know what this one is made from. I wonder what the weight on yours is with all the links versus a legit copy. One way they tell folks to know if yours is the real deal or a copy is the one from Leatherman has one ball bearing for retention but the fake one has 2 of them.Sent from my SM-T377V using Tapatalk
So the fake is better? I would think two retention balls would be more secure than one. :D
I'll happily weigh this thing with all of the links if you will do the same and we can compare.
Def
-
Thats a damn good copy. For that money I'd get one. If the genuine tread was cheaper I'd have one, but it's too expensive.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login