I'm cool now.... sort of...
-
A knockoff is a rough and similar but different, immitation of something. Like your cheap and cheerful Chevy Avalanche non-PST. We know it isn't the real deal, and they don't pretend to be. But they offer a similar widget that does about the same thing for less money. Think Pop-Tarts vs grocery store brand fruit-filled toaster pastries.
What you have here, is a counterfeit.
Totally different animal. It should be traced back, in my opinion. If we think about it and work this backwards, this is likely a partner of Leatherman who is breaking a contract. Additionally, had any of us purchased this at the normal price and under the auspices of this being genuine, it seems we may not have known any better and could have been taken for a ride
-
In your sixth photo, see the area around the wording "1/4 square" , how the material is crazed, or scarred. This may have been a QC reject for cosmetic reasons, and they sent it out the back.
-
:o That sure looks very close to me :ahhh I did have a SS Tread in possesion for a while but traded it off as it really wasn't me :D I wished I had taken more pics of it though
I would like to see this side by side with a genuine Tread though 
-
I wonder if Leatherman could tell the difference if you found "an issue" with it and sent it 'back' to them (and you didn't tick the "Sentimental" box)...
>:D -
Checking my Tread tonight I see there are differences although slight the may be. Most of its manufacturing marks, things not being as crisp or finished to the the level it's supposed to be. It's a good copy for sure; the Tread is made from 17-6 stainless and we don't know what this one is made from. I wonder what the weight on yours is with all the links versus a legit copy. One way they tell folks to know if yours is the real deal or a copy is the one from Leatherman has one ball bearing for retention but the fake one has 2 of them.
Sent from my SM-T377V using Tapatalk
-
@Grant Lamontagne said:


Maybe I'm just not familiar with LM Quality, but I immediately thought FAKE!
I mean looking at the cap lifter, on the back side it is un-even and the R2 stamp on the left is really badly done. On the front where the writing is, it looks very rough and above the E from Square it looks like its damaged. The linking bridges too look not as smooth as I would want them to be.
-
@ThundahBeagle said:
A knockoff is a rough and similar but different, immitation of something. Like your cheap and cheerful Chevy Avalanche non-PST. We know it isn't the real deal, and they don't pretend to be. But they offer a similar widget that does about the same thing for less money. Think Pop-Tarts vs grocery store brand fruit-filled toaster pastries.What you have here, is a counterfeit.
Totally different animal. It should be traced back, in my opinion. If we think about it and work this backwards, this is likely a partner of Leatherman who is breaking a contract. Additionally, had any of us purchased this at the normal price and under the auspices of this being genuine, it seems we may not have known any better and could have been taken for a ride
Yep, it is. I think this should be reported
-
So are treads made in china
there very expensive if thats the case,i dont wear bracelets etc ,just a watch and wedding ring, in my job your not aloud to wear even a watch due to hygiene, personaly I find these things a bit of a gimmick and not very funtional in some situations ,to me it's a back up thing and a bulky one at that , I handled one in a shop and instantly disliked it ,but each to your own 
-
@ThundahBeagle said:
A knockoff is a rough and similar but different, immitation of something. Like your cheap and cheerful Chevy Avalanche non-PST. We know it isn't the real deal, and they don't pretend to be. But they offer a similar widget that does about the same thing for less money. Think Pop-Tarts vs grocery store brand fruit-filled toaster pastries.What you have here, is a counterfeit.
Totally different animal. It should be traced back, in my opinion. If we think about it and work this backwards, this is likely a partner of Leatherman who is breaking a contract. Additionally, had any of us purchased this at the normal price and under the auspices of this being genuine, it seems we may not have known any better and could have been taken for a ride
I absolutely will report it to Leatherman, however there's not much they can do about these kinds of things. The thing you have to remember is that US Patents don't apply in China, and any attempts to sue will be costly and result in absolutely nothing happening.
Def
-
@ThundahBeagle said:
In your sixth photo, see the area around the wording "1/4 square" , how the material is crazed, or scarred. This may have been a QC reject for cosmetic reasons, and they sent it out the back.And there's a glob of black paint on the bottle opener in the picture above it. I have gotten Leatherman models with worse QC than that.
Def
-
@David Bowen said:
Checking my Tread tonight I see there are differences although slight the may be. Most of its manufacturing marks, things not being as crisp or finished to the the level it's supposed to be. It's a good copy for sure; the Tread is made from 17-6 stainless and we don't know what this one is made from. I wonder what the weight on yours is with all the links versus a legit copy. One way they tell folks to know if yours is the real deal or a copy is the one from Leatherman has one ball bearing for retention but the fake one has 2 of them.Sent from my SM-T377V using Tapatalk
So the fake is better? I would think two retention balls would be more secure than one. :D
I'll happily weigh this thing with all of the links if you will do the same and we can compare.
Def
-
Thats a damn good copy. For that money I'd get one. If the genuine tread was cheaper I'd have one, but it's too expensive.
-
@Grant Lamontagne said:
Checking my Tread tonight I see there are differences although slight the may be. Most of its manufacturing marks, things not being as crisp or finished to the the level it's supposed to be. It's a good copy for sure; the Tread is made from 17-6 stainless and we don't know what this one is made from. I wonder what the weight on yours is with all the links versus a legit copy. One way they tell folks to know if yours is the real deal or a copy is the one from Leatherman has one ball bearing for retention but the fake one has 2 of them.
Sent from my SM-T377V using Tapatalk
So the fake is better? I would think two retention balls would be more secure than one. :D
I'll happily weigh this thing with all of the links if you will do the same and we can compare.
Def
Sounds like a plan!
Sent from my SM-T377V using Tapatalk
-
I've been wondering if the BO was such a good idea- perhaps any flaws in this one would have been a lot more obvious if I'd gotten the standard one instead? You can hide a lot of flaws with black paint....
Def
-
whoa looks so real...it's obvious the Chinese are getting better at it :o
a few days ago, we almost burn *Butch *for being an heretic and buying a fake Chinese made SAK, but now we congratulate *Grant *for letting us know how dangerously close the clones are getting to the real thing and thank him for providing us with the key features and differences to spot a clone Treadcurios how the views on the knockoff subject change

PS: I forgot, that now the (in)famous SPAMCORP that starts by Gear... is selling these in non.BO (stainless) for $29.90 in a limited deal, you need a code though (which I won't post here unless it is agreed that it is fair for the community's interest, and harms nobody here)
-
I don't think I would post the code openly, but I am sure everyone here knows how to send you a PM if they are interested.
Oh, and I have found one thing that I don't like about this unit, which would be the same with a real Tread- I have to take it off to work at my computer, otherwise it will gouge the living crap out of my laptop.

This is more than just a personal pet peeve- if you have to take it off when you type, you may not remember to put it back on again when you get up... which means regardless of how useful the tool may or may not be, you aren't likely to have it when you need it, and that is a catastrophic fail for a tool IMHO.
Def
-
@Grant Lamontagne said:
I don't think I would post the code openly, but I am sure everyone here knows how to send you a PM if they are interested.Oh, and I have found one thing that I don't like about this unit, which would be the same with a real Tread- I have to take it off to work at my computer, otherwise it will gouge the living crap out of my laptop.

This is more than just a personal pet peeve- if you have to take it off when you type, you may not remember to put it back on again when you get up... which means regardless of how useful the tool may or may not be, you aren't likely to have it when you need it, and that is a catastrophic fail for a tool IMHO.
Def
Put the extra links back in and wear it as an anklet .
Though with how much metal you have holing your feet on nowadays you may jangle a bit if you do
:D
-
Maybe I got a fake

Sorry about the crappy pictures. I really am the worst photographer.

-
I have not wore it much after the initial test period. Its really a novelty IMO. Neat idea but we have access to pocket tools or many of us carry pocket tools for that matter. I find fiddly tools not to my liking. If I have to fuss too much to get a job done then I'm not included to carry that tool. Its certainly a neat idea. I know I said that. I would like to see a confirmed real Tread and fake side by side now.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login