Charge saws
-
Greetings Cacherx4, it's always good to hear from a fellow Michigander! :)
(reply sent)
-
I received my blade in the mail today and went right outside to try it out. First impressions were good, it fit snuggly into the lanyard ring/belt clip receptacle with no wobble. I tried to cut some metal fencing about 2" diameter but found it difficult due to the short blade size. This really isn't an issue to me since this type of tool isn't meant to do that IMO!! Next I cut some rusty nails off the garden fence posts...worked GREAT, I also used it to cut some aluminum flashing that was hanging out of my side porch step, I found out on the front porch step it was easier to just score it with my knife and bend it apart than use a sawzall balde :-\ My mistake. Then it was into the garage to cut a 60D galvanized nail in the vise just because I could ;D went thru like a hot knife thru butter once again with no blade wobble.This is definetly a great add-on and I am glad J-Sews has so generously offered some to try out. Thanks alot!!!
Jim

-
Thanks for the feedback Jim!
UPDATE:
So far I've sent blades out to 12 different members, with good results. It appears clear now that the saws work well in New Wave models, so I guess I should have titled this thread "Wave/Charge Saws." The first ones sent out measured from 4-1/4" to 4-1/2" long, but feedback I got suggested a shorter length to keep the blade ends from sticking out of the sheath while carried. Second batch of blades onward have been 4" long. All of the blades sent out before this week have been fine-cut 24 teeth-per-inch. Cacherx4 got a medium-cut 18 tpi, which sounds like it worked well for him. Contact me if you'd like to try one of these.In addition to those sent to MT.org members, I sent one sample blade to Leatherman Tool Group per their request. It was received last week, and is "being evaluated by their design engineers." I'll keep you folks advised when I hear more.
~Bob
-
J-sews finally got a chance to put it on my Charge. A miniscule wobble side to side due to the thickness of the saw, however; up and down is perfectly solid, an excellent design on your part. It's part of my animal rescue gear now I'm not going to waste it on ordinary chores so I'll let you know how it performs on the next rescue I need it. Thanks again.
-
Thanks to CacherX4, I've got a couple more of these to give away. They are the Piranha 18 tpi blades that were pictured a bit earlier in this thread. Thanks Jim!
Anybody interested?
-
Oh, Oh, can I get one :) LOL No problem, thank YOU!!!
-
I made up another batch of these yesterday. Lenox brand, 18 teeth per inch. Anybody want one that missed out earlier?
-
Those are pretty cool! One of these days I am going to have to get a Charge to try them out!
Def
-
Welcome to the forum Flash!
Always nice to have a Blue Liner here!
Def
-
What a cool idea!
to bad i,ll have to get a charge first!
more money ::)

could you do something similar for any of the swisstools?
-
The reason why this can be done so relatively easily for the LM charge is that the tool has a slot to fit in the removable lanyard, pocket clip. Bob has altered the saw ends to be able to clip into that slot.
Very clever, and very useful indeed.
-
PM sent Flash, check your messages.
...and welcome! :)
-
Hello all, its my first post so i just want to say what a great forum, looks like i will learn a lot here. I got linked to this thread by j-sews on knife forums after i posted about having seen this mod somewhere but not being able to find it. Are you still able to make these mate? If so i would like several, i can paypal or bank transfer you the costs and postage.
-
I don't know if he's still making them or not- it was kind of a fun thing to see if it worked as far as I remembered. I believe Leatherman was looking at these for possible production, but we haven't heard anything lately about that.
If he can't help you, let me know and I'll send you one that he sent me for evaluation initially.
Welcome to Multitool.org!
Def
-
Howdy bingobadgo, glad to see you made it here!
I've got a few folks waiting for the next batch, which should be complete in the next day or two. Send me a Private Message with your address, and I'll send you a blade for testing.
Bob
-
Will this work on Wave? Thank you.
-
They work in the new Wave, but not the old ones.
Def
-
@J-sews said:
Anybody else wanna try one of these? I've got a few extra of the Milwaukee blades. (white blade in the picture, metal-cutting blade, 24 teeth per inch)I have absolutely no interest in selling these. But, I can make them pretty easy, and most people can't. So if you're a Multitool.org member, I'll send you one for free. Only condition is, you come back here and tell us what you cut through. And tell us (good or bad) how well it worked.
~Bob
hey are these still availeable?id be very intrested to try one if its possible anymore.
-
Will they work on the "25th Anniversary" Wave?
-
Hi there,
I'm new to the site and live in the UK. As a engineer i use my leatherman charge all the time and it would be great to have one of these blades. Do you have any left? I'm willing to pay for them along with postage.

Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login