Showcase: Mods to plier-based multitools
-
Steve's predates mine
I also had a couple other peoples Rebars to go by as well

-
Here's my Rebar II mod thread

/post/1033900

Thanks Steve. I detect an ever-so-slight similarity to Ponch's Rebar 2 (apart from the diamond file refinement)... Given the timeline, yours must have been the earlier (or original)?

About thinning the can opener - about how much did you need to take off?I definitely wasn't the first to put scissors in the Rebar

I didn't measure how much I took off but it wasn't a lot 1/32" or less. -
I stuffed a ton of things into a juice..

-
Very nice, thanks for sharing!

Would you care to add a few details as per original post? It would be especially interesting to know where you got extraneous items from and what you had to do to them to make them fit.
-
@Dutch_Tooler said:
Very nice, thanks for sharing!
Would you care to add a few details as per original post? It would be especially interesting to know where you got extraneous items from and what you had to do to them to make them fit.
sorry I missed the first post.. I will start again. -
@Sam Lim said:
I stuffed a ton of things into a juice..
you sure got all the Juice out of the tool with those mods!

Hey that gives me a name. I am going to call her "juicy".
-
Tool Name: Juicy
Basis: Leatherman Juice CS4
Aim: Basically to squeeze in as much functional tools as possible.
Mods: Original scales and rivets were removed. Knife blade shortened to accommodate the larger flathead as a pry tool in the same tool bay. A selection of rather random tools from some micra knockoffs. Only acceptable quality tools were picked. All tools have their individual lock bar to hold them in place. Currently using screw (M3) and nuts, its a little undersized but it hasn’t cause any problems yet. Non generic tools added- Eye glass screw drivers ( both flathead and Philips ), sim card extraction tool, nail file, mini pry tool, No.1 philips screw driver, cap lifter and awl combi tool, tweezer.
Links: </topic/73731
-
@Sam Lim said:
Tool Name: Juicy
Basis: Leatherman Juice CS4
Aim: Basically to squeeze in as much functional tools as possible.
Mods: Original scales and rivets were removed. Knife blade shorted to accommodate the larger flathead as a prytool in the same tool bay. A selection of rather random tools from some micra knockoffs. Only acceptable quality tools were picked. All tools have their individual lock bar to hold them in place. Currently using screw (M4) and nuts, its a little undersized but it hasn’t cause any problems yet. Non generic tools added- Eye glass screw drivers ( both flathead and Philips ), sim card extraction tool, nail file, mini pry tool, No.1 philips screw driver, cap lifter and awl combi tool, tweezer.
Links: /topic/73731
Wow... thanks Sam, much appreciated!
Sent on my SM-G930F with Tapatalk
-
@Sam Lim said:
Tool Name: Juicy
Basis: Leatherman Juice CS4
Aim: Basically to squeeze in as much functional tools as possible.
Mods: Original scales and rivets were removed. Knife blade shortened to accommodate the larger flathead as a pry tool in the same tool bay. A selection of rather random tools from some micra knockoffs. Only acceptable quality tools were picked. All tools have their individual lock bar to hold them in place. Currently using screw (M3) and nuts, its a little undersized but it hasn’t cause any problems yet. Non generic tools added- Eye glass screw drivers ( both flathead and Philips ), sim card extraction tool, nail file, mini pry tool, No.1 philips screw driver, cap lifter and awl combi tool, tweezer.
Links: </topic/73731yeah, now that tool it's like the "Golden Ticket" from Charlie's Chocolate Factory.
Awesome!! :o

-
Tool Name: Rebar and Supertool 300
Basis: Rebar and Supertool 300
Aim: swapping BO and SS parts out to make dual colored tools
Mods: swapped the tools, pivots, plier heads and handles around to make these tools both BO and SS
Links: /topic/74755
1124171433a by Poncho 65, on Flickr
1124171432 by Poncho 65, on Flickr -
:ahhh :ahhh :ahhh
Sent on my SM-G930F with Tapatalk
-
@Sam Lim said:
Tool Name: Juicy
Basis: Leatherman Juice CS4
Aim: Basically to squeeze in as much functional tools as possible.
Mods: Original scales and rivets were removed. Knife blade shortened to accommodate the larger flathead as a pry tool in the same tool bay. A selection of rather random tools from some micra knockoffs. Only acceptable quality tools were picked. All tools have their individual lock bar to hold them in place. Currently using screw (M3) and nuts, its a little undersized but it hasn’t cause any problems yet. Non generic tools added- Eye glass screw drivers ( both flathead and Philips ), sim card extraction tool, nail file, mini pry tool, No.1 philips screw driver, cap lifter and awl combi tool, tweezer.
Links: </topic/73731yeah, now that tool it's like the "Golden Ticket" from Charlie's Chocolate Factory.
Awesome!! :o

I have googled , but I have absolutely no idea what that means.. :D
-
@Sam Lim said:
yeah, now that tool it's like the "Golden Ticket" from Charlie's Chocolate Factory.
Awesome!! :o

I have googled , but I have absolutely no idea what that means.. :D
-
Tool Name: Wave R (Ruggedised)
Basis: Leatherman Wave
Aim: Making a ruggedised version of the Wave along the lines of my Surge R.
Mods:: removed scissors and both large and small bit drivers (these went into my Rebar VX), added the Rebar's fixed Phillips and small screwdriver (trimmed down to fit) as well as an awl fashioned out of another small Rebar screwdriver (courtesy of Breezy12
). The plier head rest tabs in both handles has to be removed by twisting them off and grinding away the remains.
Links: /post/1577728, /post/1589620
-
Sweet Wave DT

-
Thanks Ponch

Hmmm... a bi-colour Wave...

-
@Dutch_Tooler said:
Thanks Ponch
Hmmm... a bi-colour Wave...


-
-
Update of
Tool Name: Wave R (Ruggedised)
Basis: Leatherman Wave
Aim: Making a ruggedised version of the Wave along the lines of my Surge R.
Mods:: removed scissors and both large and small bit drivers (these went into my Rebar VX), added the Rebar's fixed Phillips and small screwdriver (trimmed down to fit) as well as an awl fashioned out of another small Rebar screwdriver (courtesy of Breezy12
). The plier head rest tabs in both handles has to be removed by twisting them off and grinding away the remains.
UPDATE: Swapped the plain and serrated edge blades for those of a Charge (better steel PE blade and SE blade with ground cutting hook).
Links: /post/1577728, /post/1589620
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login