Show off your Sak mod's!
-
Here's what the peeler/file layer looks like in a 74mm Executive
It's interesting that one of the springs has a notch in it similar to the one in the image of the scissors/blades layer I posted previously. It doesn't have a purpose that I can see, and I did not see it before in the other 2 I've taken apart. If the opposing spring had a protrusion, it would allow the layer to have 3 tools instead of just 2, like in the scissors/blade layer.
Coincidentally, I took this knife apart specifically to see if I could arrange that very configuration: 3 tools in both layers. To try it, I ground off the peg flange of one spring, notched both in their centers, and stuck a pin between them like this:
So far, with some additional shaping, it looks like this will work. But I'm not sure what tools to mount in the layer. It will have to be one full length tool (like perhaps the peeler that I cut into a pick and bottle opener and shared in a prior post), and two half-length tools that fold toward one another (cut down from either or both a peeler and a file). I thought maybe a flat screwdriver and a 2D phillips? Or maybe a little chisel/scraper and something else? Any ideas?
-
I like to whittle, often at a cafe etc so the non threatening SAK makes for a good alternative. Made wood chisel out of the can and bottle openers and tried to make wharncliffe blades (small one works, big one I'm not too happy with).
Would like to make an alox version (but not sure if it would become too slippy on the hand) with the electrician blade and saw. Maybe anger the awl god by switching it out for another main-blade if possible then make them a lot shorter. Pref a good wharncliffe + sheepfoot perhaps...?


Added tiny baby rhino.
Sent from my SM-G935F using Tapatalk
-
Welcome onboard Jonas

I reckon a modded 58mm or 74mm chassis would work well for a non-threatening mini whittler. These frames will also fit 91mm backspring tools with a little tweaking.
You could also fit both the electrician's and small pruner blades into a single 91mm blade layer. I'm also certain that two small pen blades could fit across eah other. These 91mm mods would require building appropriate spacers, but that is easily done with alu/brass plate and some grinding. -
@T14 said:
Welcome onboard Jonas
I reckon a modded 58mm or 74mm chassis would work well for a non-threatening mini whittler. These frames will also fit 91mm backspring tools with a little tweaking.
You could also fit both the electrician's and small pruner blades into a single 91mm blade layer. I'm also certain that two small pen blades could fit across eah other. These 91mm mods would require building appropriate spacers, but that is easily done with alu/brass plate and some grinding.Thank you! I have been trying to "read up" in the threads here (already seen that my mod already have been done, and way better!)
I'd like to go with 91mm and drill and add torq screw option even if it seems hard. My big concern is to for eternit everything together and "gripability". Maybe I could solve it by harddrive aluminium (someone did a such mod, is it legit to "loan"others solutions?) And something with comfy friction on top?
FRN, g10 is all the rage still but maybe I could figure out something more affordable.
Btw! I got this delemont on conrad dot se earlier. Very curious clippoint small blade, had to get.

Sent from my SM-G935F using Tapatalk
-
Some new Woodys from deepest Mexico
- First one is a Tinker with ebony scales, and three visible brass pins. Turns out ebony is not too expensive when you buy it as guitar parts. I got 1/2" thick blanks used for the tailpiece of a guitar (where the strings go into the body) then resaw it to 3/16 for the scales. Ebony's hard and nice to work with.Also used for the black keys on a piano.
- Next is a Spartan with mango wood scales. This fruit grows in abundance where I live but a lot of times it has little blems (holes) in it from insects. This can be dealt with using black epoxy, but I just left this puppy rough for tourist comsumption.
- Third one is a modded Waiter, replacing the corkscrew with a philips. Scales are lignum vitea pinned with 4 brass rivets. This wood is one of the hardest in the world and it has sort of an oily surface. (It was actually used as bearing surfaces on large machinery) This example shows both heart and sapwood. It's unusual because the sap's just as hard as the heartwood.
Cheers -Yager



-
Nice work. The waiter->apprentice conversion is so useful. My modded apprentice is my favorite cellidor/nylon edc option.

-
Recently completed my Cadet II X mod...


Sent from my iPhone using Tapatalk
-
Saw it on FB too...
Me want-y :D
-
Thanks Paul and Nick...

Sent from my iPhone using Tapatalk
-
Limited edition bi-colour!

-
@WDY said:
Some new Woodys from deepest Mexico- First one is a Tinker with ebony scales, and three visible brass pins. Turns out ebony is not too expensive when you buy it as guitar parts. I got 1/2" thick blanks used for the tailpiece of a guitar (where the strings go into the body) then resaw it to 3/16 for the scales. Ebony's hard and nice to work with.Also used for the black keys on a piano.
- Next is a Spartan with mango wood scales. This fruit grows in abundance where I live but a lot of times it has little blems (holes) in it from insects. This can be dealt with using black epoxy, but I just left this puppy rough for tourist comsumption.
- Third one is a modded Waiter, replacing the corkscrew with a philips. Scales are lignum vitea pinned with 4 brass rivets. This wood is one of the hardest in the world and it has sort of an oily surface. (It was actually used as bearing surfaces on large machinery) This example shows both heart and sapwood. It's unusual because the sap's just as hard as the heartwood.
Cheers -Yager
You inspire me!. Gonna made new scales it of wood to my whittler knife ("horse jumping lumber" in works, for scale).

Sent from my SM-G935F using Tapatalk
-
@Jonas Stenmark said:
Some new Woodys from deepest Mexico
- First one is a Tinker with ebony scales, and three visible brass pins. Turns out ebony is not too expensive when you buy it as guitar parts. I got 1/2" thick blanks used for the tailpiece of a guitar (where the strings go into the body) then resaw it to 3/16 for the scales. Ebony's hard and nice to work with.Also used for the black keys on a piano.
- Next is a Spartan with mango wood scales. This fruit grows in abundance where I live but a lot of times it has little blems (holes) in it from insects. This can be dealt with using black epoxy, but I just left this puppy rough for tourist comsumption.
- Third one is a modded Waiter, replacing the corkscrew with a philips. Scales are lignum vitea pinned with 4 brass rivets. This wood is one of the hardest in the world and it has sort of an oily surface. (It was actually used as bearing surfaces on large machinery) This example shows both heart and sapwood. It's unusual because the sap's just as hard as the heartwood.
Cheers -Yager
You inspire me!. Gonna made new scales it of wood to my whittler knife ("horse jumping lumber" in works, for scale).

Sent from my SM-G935F using Tapatalk
Just adding complete picture. I'm not a very good modder, but I try!
Sent from my SM-G935F using Tapatalk

-
-
Jonas - nice work. You working with hardwoods on these carved guys? How are you affixing the scales? Glue/epoxy? I have a hard time with the toothpick and tweezers slots in the scales so I generally just leave 'em out. When I get better at this I'll try including them again.
Keep up the good work.
Cheers -Yager -
Recently completed my Cadet II X mod...


Sent from my iPhone using Tapatalk
That’s a beauty jaya! Love the 2017 SE colour.

Thanks H... it actually has both the 2015 and 2017 LE scales

Sent from my iPhone using Tapatalk
-
You really should make a in depth guide how to replace those copper pins with screws, I might be blind but I haven't seen any on it.. Your knife looks great!
Sent from my SM-G935F using Tapatalk
-
@Jonas Stenmark said:
You really should make a in depth guide how to replace those copper pins with screws, I might be blind but I haven't seen any on it.. Your knife looks great!Sent from my SM-G935F using Tapatalk
Thanks... I actually did... some helpful tips from H and the others too...
Sent from my iPhone using Tapatalk
-
Had fun with this one. Saved the blade from an ‘78 AMEFA knife and made an Alox ‘compact’ with it

-
Carbon fibre 93mm compact
Not sure if selling is allowed on this forum? I have a few 93mm pioneer knives I need to send to new homes to fund my addiction, can you guys guide me on the correct way?

Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login