Show off your Sak mod's!
-
Saw it on FB too...
Me want-y :D
-
Thanks Paul and Nick...

Sent from my iPhone using Tapatalk
-
Limited edition bi-colour!

-
@WDY said:
Some new Woodys from deepest Mexico- First one is a Tinker with ebony scales, and three visible brass pins. Turns out ebony is not too expensive when you buy it as guitar parts. I got 1/2" thick blanks used for the tailpiece of a guitar (where the strings go into the body) then resaw it to 3/16 for the scales. Ebony's hard and nice to work with.Also used for the black keys on a piano.
- Next is a Spartan with mango wood scales. This fruit grows in abundance where I live but a lot of times it has little blems (holes) in it from insects. This can be dealt with using black epoxy, but I just left this puppy rough for tourist comsumption.
- Third one is a modded Waiter, replacing the corkscrew with a philips. Scales are lignum vitea pinned with 4 brass rivets. This wood is one of the hardest in the world and it has sort of an oily surface. (It was actually used as bearing surfaces on large machinery) This example shows both heart and sapwood. It's unusual because the sap's just as hard as the heartwood.
Cheers -Yager
You inspire me!. Gonna made new scales it of wood to my whittler knife ("horse jumping lumber" in works, for scale).

Sent from my SM-G935F using Tapatalk
-
@Jonas Stenmark said:
Some new Woodys from deepest Mexico
- First one is a Tinker with ebony scales, and three visible brass pins. Turns out ebony is not too expensive when you buy it as guitar parts. I got 1/2" thick blanks used for the tailpiece of a guitar (where the strings go into the body) then resaw it to 3/16 for the scales. Ebony's hard and nice to work with.Also used for the black keys on a piano.
- Next is a Spartan with mango wood scales. This fruit grows in abundance where I live but a lot of times it has little blems (holes) in it from insects. This can be dealt with using black epoxy, but I just left this puppy rough for tourist comsumption.
- Third one is a modded Waiter, replacing the corkscrew with a philips. Scales are lignum vitea pinned with 4 brass rivets. This wood is one of the hardest in the world and it has sort of an oily surface. (It was actually used as bearing surfaces on large machinery) This example shows both heart and sapwood. It's unusual because the sap's just as hard as the heartwood.
Cheers -Yager
You inspire me!. Gonna made new scales it of wood to my whittler knife ("horse jumping lumber" in works, for scale).

Sent from my SM-G935F using Tapatalk
Just adding complete picture. I'm not a very good modder, but I try!
Sent from my SM-G935F using Tapatalk

-
-
Jonas - nice work. You working with hardwoods on these carved guys? How are you affixing the scales? Glue/epoxy? I have a hard time with the toothpick and tweezers slots in the scales so I generally just leave 'em out. When I get better at this I'll try including them again.
Keep up the good work.
Cheers -Yager -
Recently completed my Cadet II X mod...


Sent from my iPhone using Tapatalk
That’s a beauty jaya! Love the 2017 SE colour.

Thanks H... it actually has both the 2015 and 2017 LE scales

Sent from my iPhone using Tapatalk
-
You really should make a in depth guide how to replace those copper pins with screws, I might be blind but I haven't seen any on it.. Your knife looks great!
Sent from my SM-G935F using Tapatalk
-
@Jonas Stenmark said:
You really should make a in depth guide how to replace those copper pins with screws, I might be blind but I haven't seen any on it.. Your knife looks great!Sent from my SM-G935F using Tapatalk
Thanks... I actually did... some helpful tips from H and the others too...
Sent from my iPhone using Tapatalk
-
Had fun with this one. Saved the blade from an ‘78 AMEFA knife and made an Alox ‘compact’ with it

-
Carbon fibre 93mm compact
Not sure if selling is allowed on this forum? I have a few 93mm pioneer knives I need to send to new homes to fund my addiction, can you guys guide me on the correct way?

-
@Drreptar said:
Carbon fibre 93mm compactNot sure if selling is allowed on this forum? I have a few 93mm pioneer knives I need to send to new homes to fund my addiction, can you guys guide me on the correct way?
Either the boss,
https://forum.multitool.org/index.php?action=profile;u=2, or one of the other mods like https://forum.multitool.org/index.php?action=profile;u=4882. Contact one of them and they'll tell you how to proceed.
-
-
Had fun with this one. Saved the blade from an ‘78 AMEFA knife and made an Alox ‘compact’ with it
Fantastic mod Drraptar
How did you get the hollow rivet done so well? Beautiful work!Thanks! With the hollow rivet I just use a centre punch to start the flair, then gentle taps with a peen hammer- it’s easier than peening pins well- for me anyway :)
-
@Jonas Stenmark said:
You really should make a in depth guide how to replace those copper pins with screws, I might be blind but I haven't seen any on it.. Your knife looks great!
Sent from my SM-G935F using Tapatalk
Thanks... I actually did... some helpful tips from H and the others too...
Sent from my iPhone using Tapatalk
Thank you, I'll devour that post! Much appreciated!
Sent from my SM-G935F using Tapatalk
-
@Jonas Stenmark said:
@Jonas Stenmark said:
You really should make a in depth guide how to replace those copper pins with screws, I might be blind but I haven't seen any on it.. Your knife looks great!
Sent from my SM-G935F using Tapatalk
Thanks... I actually did... some helpful tips from H and the others too...
Sent from my iPhone using Tapatalk
Thank you, I'll devour that post! Much appreciated!
Sent from my SM-G935F using Tapatalk

Sent from my iPhone using Tapatalk
-
@Jonas Stenmark said:
@Jonas Stenmark said:
You really should make a in depth guide how to replace those copper pins with screws, I might be blind but I haven't seen any on it.. Your knife looks great!
Sent from my SM-G935F using Tapatalk
Thanks... I actually did... some helpful tips from H and the others too...
Sent from my iPhone using Tapatalk
Thank you, I'll devour that post! Much appreciated!
Sent from my SM-G935F using Tapatalk

Sent from my iPhone using Tapatalk
So getting hold of the pivots that are threaded is a no go unless you still them on your own. From a EU side pov. Or am I missing something?
Sent from my SM-G935F using Tapatalk
-
@Jonas Stenmark said:
[quote author=Jonas Stenmark link=topic=5287.msg1598466#msg1598466 date=1512874734]
You really should make a in depth guide how to replace those copper pins with screws, I might be blind but I haven't seen any on it.. Your knife looks great!Sent from my SM-G935F using Tapatalk
Thanks... I actually did... some helpful tips from H and the others too...
Sent from my iPhone using Tapatalk
Thank you, I'll devour that post! Much appreciated!
Sent from my SM-G935F using Tapatalk

Sent from my iPhone using Tapatalk
So getting hold of the pivots that are threaded is a no go unless you still them on your own. From a EU side pov. Or am I missing something?
Sent from my SM-G935F using Tapatalk
[/quote]
Try sourcing them at knife kits or Alpha Knife Supply... but they are 1/8” or about close to 3.2mm in diameter...Sent from my iPhone using Tapatalk
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login