The Hacked Leatherman Owners Club.
-
-
You can have black screw with SS cutter on the black plier head one. :D
-

Sent on my SM-G930F with Tapatalk
-
1209171442e by Poncho 65, on Flickr -
@Dutch_Tooler said:
Not wanting to steal Ponch's thunder (not at all, honest guv'
) here is the latest incarnation of my Wave R, now sporting a wicked looking awl - courtesy of Breezy12 who was kind enough to donate a spare Rebar small/medium screwdriver which I proceeded to modify forthwith. In the first pic it is in repose adjacent to the Rebar screwdriver that I likewise had to mod to fit. Last pic shows the original, with markings indicating what was in store for it... huahahah...



Sent on my SM-G930F with Tapatalk
Very nice. I'm taking notes. I seem some mods in my future.
-
@Poncho65 said:
1209171442e by Poncho 65, on FlickrI love that 2-tone
-
@Dutch_Tooler said:
Thanks, ironraven
Wave parts into a Rebar are normally a straight drop-in - you may just want to check there is no collision between tools or with the plier head, as well as whether nail nicks are still fully accessible (this has prompted a minor re-ordering of the tools in mine after I took the detailed pics).
I realise this was not the question, but just as a heads-up: Rebar tools into a Wave is somewhat different. The lock surface contours are identical between Wave and Rebar (indeed, so are some of the tools) but the Wave has less space in the handles, so you'll probably end up needing to grind off portions of the larger Rebar tools as well as removing the plier head rest tabs.
I've never tagged on to the nerve gas connotation of the acronym I gave my mods...Thank yo ufoe the info. I'm thinking about a mini-surge. These tidbits will likely help. Not sure if I'm going to cannablilze parts or buy spares.
-
Note for Rebar modders: just discovered that the thumb tab of Wave scissors will probably need shortening by about 2 mm to entirely clear the Rebar inner pliers spring in the handle so that it can lie flat and not obstruct the pliers.
Sent on my SM-G930F with Tapatalk
-
Thanks tarheel and welcome to

-
@Dutch_Tooler said:
Note for Rebar modders: just discovered that the thumb tab of Wave scissors will probably need shortening by about 2 mm to entirely clear the Rebar inner pliers spring in the handle so that it can lie flat and not obstruct the pliers.Sent on my SM-G930F with Tapatalk
I don't remember having to shorten my scissors
I have put them in 2 different Rebars (one for myself and another for my nephew) I will have to check now to be sure :ahhh :D

-
I also didn't have the problem originally, it only arose after I'd put in the Wave file which prompted a reordering of the other tools. YMMV.
Sent on my SM-G930F with Tapatalk
-
Further information which might be useful for swapping tools between Charge, Wave and Rebar and perhaps others:
Tool width in mm, measured with calipers:
Wave/Charge/Rebar range:
Scissors 2.50 **
Large flat screwdriver 2.40
Small flat screwdriver 1.80 *** (can in addition be ground down to an awl for Wave/Charge)
Phillips driver 5.00 *
Large bit driver 5.00
Mini bit driver 2.00
Awl 1.80 ***
Can/package opener 1.90Rebar:
PE blade 1.80
SE blade 1.85
Saw 1.80
File 1.80Wave file 1.85 (just in case a mod is planned... requires profiling a lock cam and slot)
Notes:
- handles and nail nick will need grinding down to fit Wave/Charge
** thumb tab may need shortening for scissors to fit Rebar
*** width and * will need grinding down to fit Wave/Charge
Sent on my SM-G930F with Tapatalk
- handles and nail nick will need grinding down to fit Wave/Charge
-
@Dutch_Tooler said:
Further information which might be useful for swapping tools between Charge, Wave and Rebar and perhaps others:Tool
widththickness in mm, measured with calipers:Wave/Charge/Rebar range:
Scissors 2.50 **
Large flat screwdriver 2.40
Small flat screwdriver 1.80 *** (can in addition be ground down to an awl for Wave/Charge)
Phillips driver 5.00 *
Large bit driver 5.00
Mini bit driver 2.00
Awl 1.80 ***
Can/package opener 1.90Rebar:
PE blade 1.80
SE blade 1.85
Saw 1.80
File 1.80Wave file 1.85 (just in case a mod is planned... requires profiling a lock cam and slot)
Notes:
- handles and nail nick will need grinding down to fit Wave/Charge
** thumb tab may need shortening for scissors to fit Rebar
*** width and * will need grinding down to fit Wave/Charge
Sent on my SM-G930F with Tapatalk

The second "width" is correct though...
- handles and nail nick will need grinding down to fit Wave/Charge
-
All of that information will help modders for sure DT

-
@Dutch_Tooler said:
Thanks Breezy... I think I'll try swapping the heads first, judging by appearances it might just work out without (much) further grinding on the tools- I already did quite a bit of that to make the three new tools fit. Thanks for the tip regarding the blade locks... but I think I'd only consider doing away with that in a real emergency. I had also considered grinding at the pliers head but share your misgivings, especially in view of a fellow member's report on broken pliers...Sent on my SM-G930F with Tapatalk
Did the pliers head swap, i.e. put Rebar pliers into my Wave R. As a result of this I'm considering renaming it to ReWaveR.
Unfortunately, my earlier misgivings have proved correct to an extent. The tool won't close completely because the pliers head hits the inner tools. However, the gap is only 1.5 mm or so and when the tool is closed as far as it goes the blade interlocks in the handles still clear the blade, albeit narrowly. I'm not sure what I should do at this stage, but tend towards leaving it as it is for now.



-
Try filing down the Philip a little to make it a little more "2D". That should work.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login


