Leatherman 2018 Rumors?
-
I'm hoping they make a RBx, as I really want the fully serrated 154CM blade in my standard Skeletool, and can't justify another Skeletool when the only differences is the bits, color, and blade. Other than that, it's the run of the mill Skeletool. D2 pliers, which are stronger than the cast stainless used today. Oh, and a modern successor to the Mini Tool.
-
I predict that no new mods or models introduced, just some color variations that will not be actually available until September if ever!
But, then I could be wrong, totally wrong.
Sent from my iPhone using Tapatalk
-
How about reintroducing the Juice KF4?
Or have the serrated blade replaced with scissors. Maybe screws instead of pins. -
I hope they do something cool.
-
I'm still waiting on the slim line Rebar. Preferably a knifeless version with the saw and file. Or even super skinny, with pliers, drivers, openner/stripper, and no blades, no saw, no file.
-
@ironraven said:
I'm still waiting on the slim line Rebar. Preferably a knifeless version with the saw and file. Or even super skinny, with pliers, drivers, openner/stripper, and no blades, no saw, no file.I think you'll be waiting a long time ;)
-
I'm really hoping for an improved OHT: slimmer frame, longer tools, bit holder and better tool selection
-
I'd like to see slimmer, sleeker tools. Maybe less functions, but the good old back to basics
and being deceived by their blade-only offering of this year, I'd love to see a return of the Crater series with updated materials and/or functions
(I'm thinking G10 scales, multiposition carry clip, scales with wrench cutouts, allen or hex drivers, ::) and new functions like package opener, belt cutter or Wave scissors, or diamond file on them
)whatever they do, I don't want to see them follow their recent trends of past years

-
A quality cheaper tool that opens the tools fron the outside withoun the nned of open the pliers, more like a spirit!
-
I think it’ll be an evolution of the Skeletool/MUT/Signal that’ll replace the Wave. Or maybe a variation of the Signal. I really like the potential of that line.
Sent from my iPad using Tapatalk
-
"Replace the Wave"? Why on earth should that be necessary? I read elsewhere around here that it's LM's best selling tool ???
-
I am surprised that so many users dislike the replaceable cutters. I personally would always use one if there is a choice.
-
It seems that some users have had plier stability problems on Rebars. I speculate this might be due to faulty casting in combination with the cutouts / threaded holes necessary for the replaceable cutters... those not being present on the Wave pliers the thinking is apparently that breakages are less likely to occur.
I'd also prefer replaceable cutters given the choice. My Rebars have not been put to what turned out to be destructive use yet...
Sent on my SM-G930F with Tapatalk
-
@gadgetman7 said:
I think it’ll be an evolution of the Skeletool/MUT/Signal that’ll replace the Wave. Or maybe a variation of the Signal. I really like the potential of that line.Sent from my iPad using Tapatalk
Why would they replace the Wave at this stage?! With all due respect... That would be ridiculous. It is their best seller, hands down. I don't own a Wave, but I own a Surge, and see the appeal of a lighter Surge.
Skeletool = not enough tools for the price.
MUT = too speSmurfpillsed and expensive for John Q. Public
Signal = ...well, who the hell knows what Signal equals, but it ain't much compared to other less expansive tools with a much better load out like Surge and Wave or even Rebar for example.For the price of a Signal, I could buy a Rebar, and a Smith's sharpener, whistle, ferro combo and still have enough left over for two steak dinners. Make that two steak dinners with whiskey sours if we are talking about the REI Signal.
-
@gadgetman7 said:
I think it’ll be an evolution of the Skeletool/MUT/Signal that’ll replace the Wave. Or maybe a variation of the Signal. I really like the potential of that line.Sent from my iPad using Tapatalk
I think Skeletool, MUT, Signal platform will live on for a while of its own accord and not replace anything in particular. I could easily see the Signal die off, for reasons stated in my last post. Or maybe the MUT. Same reason in previous post. Skeletool will likely stick around, but I see most of that platform as paying more for less tool load out, and the other 3rd of that platform as just too expensive and specific.
-
Also, as point of fact, doesn't the best indicator of any future model come from either an inside source (scoop type news) or the US Patent office (solid plans)?
-
@ironraven said:
I'm still waiting on the slim line Rebar. Preferably a knifeless version with the saw and file. Or even super skinny, with pliers, drivers, openner/stripper, and no blades, no saw, no file.You do realise that the Rebar EDC has been out for a while?
Multi-Tool Without Knife | Rebar by Leatherman
Perfect for environments and job sites that need a handy set of tools, yet don’t allow for knife blades. Official Online Store of Leatherman.
Leatherman (www.leatherman.com)
-
I think it’ll be an evolution of the Skeletool/MUT/Signal that’ll replace the Wave. Or maybe a variation of the Signal. I really like the potential of that line.
Sent from my iPad using Tapatalk
Why would they replace the Wave at this stage?! With all due respect... That would be ridiculous. It is their best seller, hands down. I don't own a Wave, but I own a Surge, and see the appeal of a lighter Surge.
Skeletool = not enough tools for the price.
MUT = too speSmurfpillsed and expensive for John Q. Public
Signal = ...well, who the hell knows what Signal equals, but it ain't much compared to other less expansive tools with a much better load out like Surge and Wave or even Rebar for example.For the price of a Signal, I could buy a Rebar, and a Smith's sharpener, whistle, ferro combo and still have enough left over for two steak dinners. Make that two steak dinners with whiskey sours if we are talking about the REI Signal.
If you get over the plastic bits of the Signal, you can see that its the next gen of the Wave Frame.
Wave Frame (only one arm): 2 large tools, 3 small tools
Signal Frame (only one arm): 1 large tool, 4 small tools + room for a plastic implement
Signal Frame doubled up with 2 large tools (only one arm): 2 large tools, 5 small tools + room for a plastic implementYou can easily see, that the Signal frame has a much higher tool density. Whether you add the tap hammer on the second arm or not is then a matter of taste. Personally, I hope they offer both:
Signal 2A: 4 Large outside tools, 5 small tools + hammer + 2 plastic implements (bit holders would be great)
Signal 2B: 4 Large outside tools, 10 small tools + 2 plastic implements (bit holders would be great)All of this holds true, if they scale the Signal Frame up to Surge size.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login