Leatherman 2018 Rumors?
-
@ironraven said:
I'm still waiting on the slim line Rebar. Preferably a knifeless version with the saw and file. Or even super skinny, with pliers, drivers, openner/stripper, and no blades, no saw, no file.I think you'll be waiting a long time ;)
-
I'm really hoping for an improved OHT: slimmer frame, longer tools, bit holder and better tool selection
-
I'd like to see slimmer, sleeker tools. Maybe less functions, but the good old back to basics
and being deceived by their blade-only offering of this year, I'd love to see a return of the Crater series with updated materials and/or functions
(I'm thinking G10 scales, multiposition carry clip, scales with wrench cutouts, allen or hex drivers, ::) and new functions like package opener, belt cutter or Wave scissors, or diamond file on them
)whatever they do, I don't want to see them follow their recent trends of past years

-
A quality cheaper tool that opens the tools fron the outside withoun the nned of open the pliers, more like a spirit!
-
I think it’ll be an evolution of the Skeletool/MUT/Signal that’ll replace the Wave. Or maybe a variation of the Signal. I really like the potential of that line.
Sent from my iPad using Tapatalk
-
"Replace the Wave"? Why on earth should that be necessary? I read elsewhere around here that it's LM's best selling tool ???
-
I am surprised that so many users dislike the replaceable cutters. I personally would always use one if there is a choice.
-
It seems that some users have had plier stability problems on Rebars. I speculate this might be due to faulty casting in combination with the cutouts / threaded holes necessary for the replaceable cutters... those not being present on the Wave pliers the thinking is apparently that breakages are less likely to occur.
I'd also prefer replaceable cutters given the choice. My Rebars have not been put to what turned out to be destructive use yet...
Sent on my SM-G930F with Tapatalk
-
@gadgetman7 said:
I think it’ll be an evolution of the Skeletool/MUT/Signal that’ll replace the Wave. Or maybe a variation of the Signal. I really like the potential of that line.Sent from my iPad using Tapatalk
Why would they replace the Wave at this stage?! With all due respect... That would be ridiculous. It is their best seller, hands down. I don't own a Wave, but I own a Surge, and see the appeal of a lighter Surge.
Skeletool = not enough tools for the price.
MUT = too speSmurfpillsed and expensive for John Q. Public
Signal = ...well, who the hell knows what Signal equals, but it ain't much compared to other less expansive tools with a much better load out like Surge and Wave or even Rebar for example.For the price of a Signal, I could buy a Rebar, and a Smith's sharpener, whistle, ferro combo and still have enough left over for two steak dinners. Make that two steak dinners with whiskey sours if we are talking about the REI Signal.
-
@gadgetman7 said:
I think it’ll be an evolution of the Skeletool/MUT/Signal that’ll replace the Wave. Or maybe a variation of the Signal. I really like the potential of that line.Sent from my iPad using Tapatalk
I think Skeletool, MUT, Signal platform will live on for a while of its own accord and not replace anything in particular. I could easily see the Signal die off, for reasons stated in my last post. Or maybe the MUT. Same reason in previous post. Skeletool will likely stick around, but I see most of that platform as paying more for less tool load out, and the other 3rd of that platform as just too expensive and specific.
-
Also, as point of fact, doesn't the best indicator of any future model come from either an inside source (scoop type news) or the US Patent office (solid plans)?
-
@ironraven said:
I'm still waiting on the slim line Rebar. Preferably a knifeless version with the saw and file. Or even super skinny, with pliers, drivers, openner/stripper, and no blades, no saw, no file.You do realise that the Rebar EDC has been out for a while?
Multi-Tool Without Knife | Rebar by Leatherman
Perfect for environments and job sites that need a handy set of tools, yet don’t allow for knife blades. Official Online Store of Leatherman.
Leatherman (www.leatherman.com)
-
I think it’ll be an evolution of the Skeletool/MUT/Signal that’ll replace the Wave. Or maybe a variation of the Signal. I really like the potential of that line.
Sent from my iPad using Tapatalk
Why would they replace the Wave at this stage?! With all due respect... That would be ridiculous. It is their best seller, hands down. I don't own a Wave, but I own a Surge, and see the appeal of a lighter Surge.
Skeletool = not enough tools for the price.
MUT = too speSmurfpillsed and expensive for John Q. Public
Signal = ...well, who the hell knows what Signal equals, but it ain't much compared to other less expansive tools with a much better load out like Surge and Wave or even Rebar for example.For the price of a Signal, I could buy a Rebar, and a Smith's sharpener, whistle, ferro combo and still have enough left over for two steak dinners. Make that two steak dinners with whiskey sours if we are talking about the REI Signal.
If you get over the plastic bits of the Signal, you can see that its the next gen of the Wave Frame.
Wave Frame (only one arm): 2 large tools, 3 small tools
Signal Frame (only one arm): 1 large tool, 4 small tools + room for a plastic implement
Signal Frame doubled up with 2 large tools (only one arm): 2 large tools, 5 small tools + room for a plastic implementYou can easily see, that the Signal frame has a much higher tool density. Whether you add the tap hammer on the second arm or not is then a matter of taste. Personally, I hope they offer both:
Signal 2A: 4 Large outside tools, 5 small tools + hammer + 2 plastic implements (bit holders would be great)
Signal 2B: 4 Large outside tools, 10 small tools + 2 plastic implements (bit holders would be great)All of this holds true, if they scale the Signal Frame up to Surge size.
-
I think the Wave is a great tool and have several including Charges. But, Leatherman has always evolved their tools and I suspect the Wave line will evolve too. It makes sense to merge the Signal/MUT line with the Wave line at some point but it’s likely that they’ll take elements from both.
I hope that Leatherman modifies the Signal myself. I’d like a Surge like blade exchanger to replace the saw and for them to add scissors. Also, remove the whistle and put in bit storage. Finally, just remove the outside file and upgrade the blade steel to S35VN. At that point you have a Wave minus the serrated blade but with a hammer, awl and locking handles.
Sent from my iPad using Tapatalk
-
Sorry about my ignorance but what is wrong with the pliers on the Wave or the Rebar???
Thank you. -
-
@Etherealicer said:
Signal 2A: 4 Large outside tools, 5 small tools + hammer + 2 plastic implements (bit holders would be great)That's the first thing I thought when I held the Signal for the first time. Be it the Wave set-up, or two blades + scissors + saw, or blade + scissors +saw + file, it would be sweet. Just adding two long tools would not make it too thick, and considering the negatives people list about the Signal, having four long tools would have helped it sell more.
@Etherealicer said:
Signal 2B: 4 Large outside tools, 10 small tools + 2 plastic implements (bit holders would be great)Another thought would indeed be pretty much a Wave with the plastic bits. The sharpener would be very easy to add, although it is not needed imo. If we also drop the whistle, the ferro rod could also be attached in the same manner as the sharpener.
The Wave is the problem, isn't it? It's just too good. All these bells and whistles, and some people still prefer the Wave over the Signal, even for the purpose the Signal was specifically designed to cater. Whenever a new full-size multitool is released, we can't help compare it to the Wave. If it is not just as good, then why not just go with a Wave?
In the Signal's case, dropping two long tools and making the blade combo edged had a lot to do with the mixed reviews it received.
I sincerely hope we see a new Signal Plus, with 4 long tools. Or maybe a Signal with a 154CM plain edge. And a sharpened awl.
Also, since the plastic bits are putting off lots of people, why not have them in aluminum instead? -
Signal 2B: 4 Large outside tools, 10 small tools + 2 plastic implements (bit holders would be great)
Another thought would indeed be pretty much a Wave with the plastic bits.{...}
No, it has 4 small tools more, (check out where the awl on the Signal is!!!). And because they are in the same slot as the large tools, they can be rather thick.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login