Spirit 30 day Challenge with a few Early- early Birds
-
As depicted by the picture, the needle nose are great. This morning I was attempting to tighten a size #2 brass screw, and as most of us knows, it snapped. Had to drill around the screw hole to extract the tiny broken threaded end left in the wood stock. I used my Spirit needle nose to grab that little smurf. I applied enough pressure on the handles to secure the jaws on the little smurf and half a turn with my wrist...It came out. I was very pleased.
Drilled out the messy hole and inserted a piece of dowel to make the hole strong again...
First task of removing broken screw was a success.Spirit needle nose plier jaws: 1
Busted little brass screw imbedded 3/8th of an inch into birds eye maple: 0
-
@Marc_in_NS said:
As depicted by the picture, the needle nose are great. This morning I was attempting to tighten a size #2 brass screw, and as most of us knows, it snapped. Had to drill around the screw hole to extract the tiny broken threaded end left in the wood stock. I used my Spirit needle nose to grab that little smurf. I applied enough pressure on the handles to secure the jaws on the little smurf and half a turn with my wrist...It came out. I was very pleased.
Drilled out the messy hole and inserted a piece of dowel to make the hole strong again...
First task of removing broken screw was a success.Spirit needle nose plier jaws: 1
Busted little brass screw imbedded 3/8th of an inch into birds eye maple: 0

-
Day 2

Tested out the wire cutters on some old rca cable
Worked pretty well but didn't cut the fine wire cleanly every time.



-
Sorry guys, I have to withdraw from this challenge for personal reasons. I wish you all a good time during this gruelling challenge. I shall also leave this wonderful community. It’s been very interesting, to say the least, to have met you good folks.
So long!
-
@Marc_in_NS said:
Sorry guys, I have to withdraw from this challenge for personal reasons. I wish you all a good time during this gruelling challenge. I shall also leave this wonderful community. It’s been very interesting, to say the least, to have met you good folks.So long!
Wait what?!
You're leaving us?!
:'( :'( :'(
If you find your way back here, there will be a seat open for you...
I wish you all the best and hope that there isn't any bad news involved in this...I'll miss you buddy...I really will :'(
-
Having that said...
Day 1, quite reluctant since Marc's news... couldn't be sadder at the moment.Mounted an electrical heater that I removed prior to the office renovations. It's an older model that came with the house.

-
Wow Marc, that was sudden :(
Sorry to see you go and I hope it's nothing serious. We will be here if you decide to come back and I hope you do

All the best

-
@Poncho65 said:
Great pics already guys

and could you get some more pics of the cylinfdrical adapter RP
Some views of the end the tool goes in please 
On a side note, I never try to overtorque the driver with the adapter on
If it has to be used that hard then it is time to try and track a more dedicated tool down 
Out of daylight, but I'll post more tomorrow.

-
Wow Marc :ahhh don't go :ahhh But if you must I hope you can come back quickly buddy

Really gonna miss you in the challenge :-\
-
Great pics already guys

and could you get some more pics of the cylinfdrical adapter RP
Some views of the end the tool goes in please 
On a side note, I never try to overtorque the driver with the adapter on
If it has to be used that hard then it is time to try and track a more dedicated tool down 
Out of daylight, but I'll post more tomorrow.

Thanks RP
Can't wait 
-
well, Marc, you enrolled in this in good spirit so we'll be here to help and receive you back when you can finally join us again.

I hope it's not something bad what draws you out,
and best wishes!!
so far I only swapped my tools and I'm on the first coffee with the go-to stuff that I'll carry for the challenge.
So,
Day: 1,
Coffee: 1
-
In noticed this morning that the blades were not quite as sharp as they should be so did a little day one maintenance.
The butter blade had a rolled edge but my diamond multi-sharp made quick work of the serrated blade. The Lansky turnbox took care of the PE blade.

-
@Marc_in_NS said:
Sorry guys, I have to withdraw from this challenge for personal reasons. I wish you all a good time during this gruelling challenge. I shall also leave this wonderful community. It’s been very interesting, to say the least, to have met you good folks.So long!
Not something I wanted to hear, sad :-[
Sorry for posting in the challenge thread but I am already missing Marc
-
Be well Marc, you will be missed! Hope you can return in the future.
-
Marc, very sorry to read you have had to pull out. I hope you are well and can come back and rejoin us when you can!

Day 01:
I didn't switch over to to Spirit carry yesterday until later in the day, so I figured this is Day 1 for me. I've been busy shoveling snow much of the day. We've gotten around 10" or so of new snow in the past two days, so I've had a lot of shoveling to do. Cars are still buried! As a result, my primary tool has been a large shovel today. Spirit was unsheathed for a challenge shot:

-
@Nix said:
Marc, very sorry to read you have had to pull out. I hope you are well and can come back and rejoin us when you can!
Day 01:
I didn't switch over to to Spirit carry yesterday until later in the day, so I figured this is Day 1 for me. I've been busy shoveling snow much of the day. We've gotten around 10" or so of new snow in the past two days, so I've had a lot of shoveling to do. Cars are still buried! As a result, my primary tool has been a large shovel today. Spirit was unsheathed for a challenge shot:

Shiny!

Looking forward to your thoughts after carrying a Rebar. The LMs have some advantages, as I found out when I carried a Charge for a month, but the little Spirit holds up well to most comparisons in my experience. Good luck Nix!

-
Me, too!

-
*
Gratuitous pic from a prior Challenge participant.* -
@powernoodle said:
*
Gratuitous pic from a prior Challenge participant.*Patina!

I appreciate yor gratuitous pic fellow Spirit challenger!

Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login