Spirit 30 day Challenge with a few Early- early Birds
-
Wow Marc :ahhh don't go :ahhh But if you must I hope you can come back quickly buddy

Really gonna miss you in the challenge :-\
-
Great pics already guys

and could you get some more pics of the cylinfdrical adapter RP
Some views of the end the tool goes in please 
On a side note, I never try to overtorque the driver with the adapter on
If it has to be used that hard then it is time to try and track a more dedicated tool down 
Out of daylight, but I'll post more tomorrow.

Thanks RP
Can't wait 
-
well, Marc, you enrolled in this in good spirit so we'll be here to help and receive you back when you can finally join us again.

I hope it's not something bad what draws you out,
and best wishes!!
so far I only swapped my tools and I'm on the first coffee with the go-to stuff that I'll carry for the challenge.
So,
Day: 1,
Coffee: 1
-
In noticed this morning that the blades were not quite as sharp as they should be so did a little day one maintenance.
The butter blade had a rolled edge but my diamond multi-sharp made quick work of the serrated blade. The Lansky turnbox took care of the PE blade.

-
@Marc_in_NS said:
Sorry guys, I have to withdraw from this challenge for personal reasons. I wish you all a good time during this gruelling challenge. I shall also leave this wonderful community. It’s been very interesting, to say the least, to have met you good folks.So long!
Not something I wanted to hear, sad :-[
Sorry for posting in the challenge thread but I am already missing Marc
-
Be well Marc, you will be missed! Hope you can return in the future.
-
Marc, very sorry to read you have had to pull out. I hope you are well and can come back and rejoin us when you can!

Day 01:
I didn't switch over to to Spirit carry yesterday until later in the day, so I figured this is Day 1 for me. I've been busy shoveling snow much of the day. We've gotten around 10" or so of new snow in the past two days, so I've had a lot of shoveling to do. Cars are still buried! As a result, my primary tool has been a large shovel today. Spirit was unsheathed for a challenge shot:

-
@Nix said:
Marc, very sorry to read you have had to pull out. I hope you are well and can come back and rejoin us when you can!
Day 01:
I didn't switch over to to Spirit carry yesterday until later in the day, so I figured this is Day 1 for me. I've been busy shoveling snow much of the day. We've gotten around 10" or so of new snow in the past two days, so I've had a lot of shoveling to do. Cars are still buried! As a result, my primary tool has been a large shovel today. Spirit was unsheathed for a challenge shot:

Shiny!

Looking forward to your thoughts after carrying a Rebar. The LMs have some advantages, as I found out when I carried a Charge for a month, but the little Spirit holds up well to most comparisons in my experience. Good luck Nix!

-
Me, too!

-
*
Gratuitous pic from a prior Challenge participant.* -
@powernoodle said:
*
Gratuitous pic from a prior Challenge participant.*Patina!

I appreciate yor gratuitous pic fellow Spirit challenger!

-

PN
Always such profound pics. where is the illustrious cat? -
This sounds like a challenge for me. So, here it goes, Day 1:

-
Great day of pics and discussion guys
Lost one already but maybe he will be back before long and can start back up with the other guys

-
I am going to call this Day 2 and this way I can finish my challenge before my trip

I started the day out with this gear

1230170949 by Poncho 65, on FlickrThen I brought the Spirit into service freeing this brother from another mother :D
1230172041 by Poncho 65, on FlickrThe butter knife blade was sufficient to cut the blister pack open but I sure would have liked a PE blade

Now if I can only wait until February to carry it :ahhh :ahhh :ahhh :o
-
Nice Rebar !
Could have used the scissors since you have an X.

:D
-
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login

The blade is doing great so far and I haven't found anything it can't cut but I miss a PE on my MT :D