Spirit 30 day Challenge with a few Early- early Birds
-
Marc, very sorry to read you have had to pull out. I hope you are well and can come back and rejoin us when you can!

Day 01:
I didn't switch over to to Spirit carry yesterday until later in the day, so I figured this is Day 1 for me. I've been busy shoveling snow much of the day. We've gotten around 10" or so of new snow in the past two days, so I've had a lot of shoveling to do. Cars are still buried! As a result, my primary tool has been a large shovel today. Spirit was unsheathed for a challenge shot:

-
@Nix said:
Marc, very sorry to read you have had to pull out. I hope you are well and can come back and rejoin us when you can!
Day 01:
I didn't switch over to to Spirit carry yesterday until later in the day, so I figured this is Day 1 for me. I've been busy shoveling snow much of the day. We've gotten around 10" or so of new snow in the past two days, so I've had a lot of shoveling to do. Cars are still buried! As a result, my primary tool has been a large shovel today. Spirit was unsheathed for a challenge shot:

Shiny!

Looking forward to your thoughts after carrying a Rebar. The LMs have some advantages, as I found out when I carried a Charge for a month, but the little Spirit holds up well to most comparisons in my experience. Good luck Nix!

-
Me, too!

-
*
Gratuitous pic from a prior Challenge participant.* -
@powernoodle said:
*
Gratuitous pic from a prior Challenge participant.*Patina!

I appreciate yor gratuitous pic fellow Spirit challenger!

-

PN
Always such profound pics. where is the illustrious cat? -
This sounds like a challenge for me. So, here it goes, Day 1:

-
Great day of pics and discussion guys
Lost one already but maybe he will be back before long and can start back up with the other guys

-
I am going to call this Day 2 and this way I can finish my challenge before my trip

I started the day out with this gear

1230170949 by Poncho 65, on FlickrThen I brought the Spirit into service freeing this brother from another mother :D
1230172041 by Poncho 65, on FlickrThe butter knife blade was sufficient to cut the blister pack open but I sure would have liked a PE blade

Now if I can only wait until February to carry it :ahhh :ahhh :ahhh :o
-
Nice Rebar !
Could have used the scissors since you have an X.

:D
-
-
Next time you need to try out the sharp edge of the chisel. It excels at opening packaging. I like the butter blade. I find it elegant, but I always carry a one hand opening plain edge knife with my Spirit because sometimes you just need to cut something in a hurry and you don't want to mess around with deploying the MT.

-
On the SE vs PE note, I carried a Spirit for a while several years ago and the butter blade is ok but I too prefer a PE blade. To that end I jumped all over the Spirit I will be performing the challenge with. My Spirit has a few mods. First fixing one of the few faults of Vic MTs and Knives is the flat heads have all been "sharpened" no rounded edges so they don't slip as often. Second the pliars are modded to be more true neeldle nose. Still not sure if this is an improvement or just differant. Third the butter blade has been reprofiled and is now a PE wich I realy like. I will give the SE due respect and say that when maintained well it is far superior on fiberious material, rope, belts, etc... and soft filmed items such as tomatos. For the most part my everyday MT cutting needs don't include these items often and a well maintained PE will even do them efficiently if one knows how to use a knife.
![20171230_215018[8098].jpg](/assets/uploads/_imported_attachments/migrated/350929_20171230_215018%5B8098%5D.jpg)
![20171230_214738[8096].jpg](/assets/uploads/_imported_attachments/migrated/350931_20171230_214738%5B8096%5D.jpg)
![20171230_214924[8097].jpg](/assets/uploads/_imported_attachments/migrated/350933_20171230_214924%5B8097%5D.jpg)
-
At least you did a good job of the re-profiling. I've seen some former serrated blades that had just been sharpened away on a stone to supposedly a straight edge, but the owners left nubs where the serrations had been so it was kind of wavey.

-
Day 1
Light duty prying.

Removed the clips from my Maxpedition pouches. I might cut off the plastic parts entirely, but for now, having those bulky clips off will do.
-
@Marc_in_NS said:
Sorry guys, I have to withdraw from this challenge for personal reasons. I wish you all a good time during this gruelling challenge. I shall also leave this wonderful community. It’s been very interesting, to say the least, to have met you good folks.So long!
:-[

-
Awsome pics so far! I have been carrying my spirit for a few days now to get in the mood but will start the official challenge the 10th of January
[It's not failure if you learn something from it]
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login

