The Hacked Leatherman Owners Club.
-
I think it is the width which is locally greater for the Rebar pliers than for the Wave ones, over a limited portion of their length. The Rebar ones are also less rounded off, although I don't think this is the problem here. The overall thickness is identical for both.
-
That plier head in it still looks great though

-
Thanks

I might try shaving some more material off the flat screwdrivers. That should still be possible without impairing their function...
In other news: Happy New Year!
-
I have filed some material off the flat drivers (small one in shank width, large one made a minute bevel on the upper inner edge as one looks down into the handle, same for the can opener which I took the opportunity to sharpen to lethality) as well as off non-critical parts of the inner handle spring and rivet area. This has reduced the gap, but a small one remains - not due to the Phillips, fortunately, so I won't have to affect its functionality, but the pliers head is now hitting the upward bent part of the handle springs (as measured with the trusty method of a small strip of paper interposed between head and spring and tugging at it until one notices where its stops being held). I am not about to start Dremeling or filing those, so I'll have to live with the remaining gap (about 0.8 mm or so). Not ideal, but after all it's a mod :D.
I am now ready to officially rename it the ReWaveR (note the intended positions of capitals)
!Thanks to all for the tips, and Happy New Year 2018 to all as well

-

Happy New Year to you as well

-
Thanks

Pics in the Showcase thread
-
Happy New Year to all

-
New Year's Day carry - Rebar VX

-
@Dutch_Tooler said:
New Year's Day carry - Rebar VX
Nice DT

-
Thanks Ponch

-
Very cool

-
NASA CapCom: "Rebar VX go for launch.... in 5... 4... 3... 2... 1... Liftoff, we gave a liftoff of Rebar VX on a mission to the exoplanet Cappuccino discovered, as you may remember, five years ago..."

-
New guy here, been looking through the pages for the last several days and have some ideas in mind for my LM Charge XTI. Used to carry it daily but haven’t for a few years, thinking about putting it back on my belt after a few mods, one of which will certainly be adding Wingman or SAK scissors but the other two I’m having a hard time finding.
I’m looking to replace the plain edge knife with a similar size/quality combo edge and replace the serrated knife with a dedicated strap cutter. I’m a firefighter and the serrated blade is handy/needed for cutting rope and such, the plain edge is nice for most everything else, and the dedicated strap cutter will be a backup to my Benchmade 8 hook or if for some reason I don’t have it. I know the current serrated blade has the gut hook but I’m just not sure how effective it is not to mention the opposite side is a sharp serrated blade and not exactly ideal.
Anyone know any strap cutter that can be made to work? Have read the the one off the OHT isn’t great but the Raptor strap cutter is but haven’t been able to source the parts, could justpurchase the V-cutter from SOG but not sure what it would take to get it to fit.
Thanks in advance for any help, you guys definitely have the wheels turning for me.
-
Welcome to

Seems the Raptor strap cutter would work
but never seen it down and am not for sure :-\ Plus you would either have to track the part down as you are trying or buy a Raptor for the part :ahhh Either way good luck in the search and the mod

-
20 minute Style PS/CS mod to remove the useless carabiner and add a split ring instead.
Tools needed: wire cutters, file, knife or hacksaw blade
-
Carefully cut the black plastic at the base of tweezers, about 2 mm below the rivet, with a knife or hacksaw.
-
Use wire cutters to snip the carabiner at the base of the cutouts (4 places). These can just be snapped off with the cutters.
-
File down the jagged stubs remaining until they are roughly even with the plastic piece you cut in step 1.
-
Add split rings as shown in the photo.
Never lose your Style PS or CS again because it fell off the keyring.

-
-
@Shane O'Neal said:
20 minute Style PS/CS mod to remove the useless carabiner and add a split ring instead.Tools needed: wire cutters, file, knife or hacksaw blade
-
Carefully cut the black plastic at the base of tweezers, about 2 mm below the rivet, with a knife or hacksaw.
-
Use wire cutters to snip the carabiner at the base of the cutouts (4 places). These can just be snapped off with the cutters.
-
File down the jagged stubs remaining until they are roughly even with the plastic piece you cut in step 1.
-
Add split rings as shown in the photo.
Never lose your Style PS or CS again because it fell off the keyring.
Erm.. Do you really need to remove the carabiner to add the ring? There's already holes to attach the rings? Imo the carabiner serves as a extended handle to use the scissors.. I dun use the carabiner but definitely like it there for its longer handle..
-
-
Hello all,
At the beginning of 2018, I became a new owner of the Leatherman Wave :-) .
It's really a great tool !!
When I see all mods/hacks, one thing are really cool, it's replace file or blade by a bigger scissors .
Did you have a really good howto with marketplace to buy the scissors ?Thank's in advance.
-
@Sam Lim said:
Erm.. Do you really need to remove the carabiner to add the ring? There's already holes to attach the rings? Imo the carabiner serves as a extended handle to use the scissors.. I dun use the carabiner but definitely like it there for its longer handle..It's a personal preference. I hated that carabiner.
-
Welcome to
Shane and Draleg 
I have never done the Wave mod you speak of Draleg so hopefully someone who has will be along to help you out

Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login