The Hacked Leatherman Owners Club.
-
All of that information will help modders for sure DT

-
@Dutch_Tooler said:
Thanks Breezy... I think I'll try swapping the heads first, judging by appearances it might just work out without (much) further grinding on the tools- I already did quite a bit of that to make the three new tools fit. Thanks for the tip regarding the blade locks... but I think I'd only consider doing away with that in a real emergency. I had also considered grinding at the pliers head but share your misgivings, especially in view of a fellow member's report on broken pliers...Sent on my SM-G930F with Tapatalk
Did the pliers head swap, i.e. put Rebar pliers into my Wave R. As a result of this I'm considering renaming it to ReWaveR.
Unfortunately, my earlier misgivings have proved correct to an extent. The tool won't close completely because the pliers head hits the inner tools. However, the gap is only 1.5 mm or so and when the tool is closed as far as it goes the blade interlocks in the handles still clear the blade, albeit narrowly. I'm not sure what I should do at this stage, but tend towards leaving it as it is for now.



-
Try filing down the Philip a little to make it a little more "2D". That should work.
-
Yep, thanks, I identified that as an option. Only works one side though...
-
Doesn't look bad the way it is IMO

I wouldn't file down the Phillips that's for sure.
-
Is it the width of the plier heads that is the issue?
-
I think it is the width which is locally greater for the Rebar pliers than for the Wave ones, over a limited portion of their length. The Rebar ones are also less rounded off, although I don't think this is the problem here. The overall thickness is identical for both.
-
That plier head in it still looks great though

-
Thanks

I might try shaving some more material off the flat screwdrivers. That should still be possible without impairing their function...
In other news: Happy New Year!
-
I have filed some material off the flat drivers (small one in shank width, large one made a minute bevel on the upper inner edge as one looks down into the handle, same for the can opener which I took the opportunity to sharpen to lethality) as well as off non-critical parts of the inner handle spring and rivet area. This has reduced the gap, but a small one remains - not due to the Phillips, fortunately, so I won't have to affect its functionality, but the pliers head is now hitting the upward bent part of the handle springs (as measured with the trusty method of a small strip of paper interposed between head and spring and tugging at it until one notices where its stops being held). I am not about to start Dremeling or filing those, so I'll have to live with the remaining gap (about 0.8 mm or so). Not ideal, but after all it's a mod :D.
I am now ready to officially rename it the ReWaveR (note the intended positions of capitals)
!Thanks to all for the tips, and Happy New Year 2018 to all as well

-

Happy New Year to you as well

-
Thanks

Pics in the Showcase thread
-
Happy New Year to all

-
New Year's Day carry - Rebar VX

-
@Dutch_Tooler said:
New Year's Day carry - Rebar VX
Nice DT

-
Thanks Ponch

-
Very cool

-
NASA CapCom: "Rebar VX go for launch.... in 5... 4... 3... 2... 1... Liftoff, we gave a liftoff of Rebar VX on a mission to the exoplanet Cappuccino discovered, as you may remember, five years ago..."

Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login
