I did it- I broke down and bought a Charge
-
Well I will definitely give this one some carry time. there have been other tools and knives in the past that I didn't care for at first but started to appreciate after a bit of time on the streets.
This one will be no different- it will get carried and used, and maybe appreciated. I just like to post my initial thoughts so that way I can make a big deal of what an idiot I was afterwards!
Def
-
There's are a lot of differences in opinion about multi-tools on the forum but diversity is a good thing. In the mod forum someone replaced the knife blade on a Leatherman Kick with a saw. I rarely use the saw on multi-tools and probably use the knife most often. Neither choice is right or wrong. But in this case (regarding the XTi), Defender is just flat out wrong!!! :P

@nautical34 said:
Having the two bit drivers makes perfect sense for me, I have come across many situations where one flat head was too big, so I just turned it over and the other side was perfect, same thing goes for Phillips as well( I like having the two dedicated screw drivers, as apposed to the Ti) ...I gotta agree with you. I really like having two choices of Phillips and flat drivers. This is arrangement is particularly useful to me since I use the pocket clip rather than the sheath and so I rarely (if ever) carry the bit kit with me.

Originally, I didn't appreciate the benefit of having two drivers and I chose to buy the Ti over the XTi. But after using the Ti, I quickly changed my mind and replaced it with an XTi.
I didn't like the tool selection on the Ti at all. The scissors aren't much bigger than those on the Classic SD (which is always on my keychain).

The flat driver is an uninspired addition to the tool. I'd rather use the bit drivers. The dedicated flat driver isn't even one of the nice ones (like the ones on the Core and Surge)--it's the same one that's used in the entry level Leatherman tools. I know some people use it a as a pry bar but I don't trust it won't bend or break.
@Defender said:
The file grinds noticeably against the nice titanium handlesIt seems like the quality went down hill a bit. My older XTi has much better fit and finish than my newer XTi. And the file doesn't rub at all on the older XTi but it does on the newer one.
-
Thanks! (Didn't mean to almost get banned ;D)
And you're right about the diamond file, the reason I mentioned it is because the file on my Ti is bent slightly (it was used) so it really rubbs up against the handle. At the place it rubbs there are no marks on the Ti, so I assumed if it's been like that for awhile and still hasn't marked up the handle I doubt it would QUICKLY eat it away, but yeah the diamond file's purpose is just that.
I hope you come to enjoy your Charge as I have mine, I was SOG carrier for awhile (Can't wait till the powerassist comes out) but I love the one handed blade opening of the LM's.
:)
-
...in case it wasn't obvious I was just teasing you Def.
I should mention that my older XTi is the camo version so the nicer fit and finish could be due to the edition rather than its age--not sure which.
-
Recently I had the opportunity to play with a Victorinox XAVT, which is a pretty huge monster of a SAK. I had always thought that two identical bit drivers on that were excessive, but I came to appreciate it when I saw it in person- the bit drivers sit on top of small built in caddys that each hold three double ended bits in addition to the ones in the driver itself. Since they made that many bits I can appreciate that they needed two caddys to include them all.
That's not the case here and while I may change my mind with some carry/use as well, I still have to say that I'd really rather see some diversity here. I'm not a fan of several types of flatheads on one tool, I certainly am not going to be a big fan of this. It has a bit driver, why add a second one, especially when there is a caddy that goes along with it and is (supposedly) designed to carry the caddy as well?
I appreciate that you guys like yours, and I may feel that way too after some carry and use, but this is just my initial impression, and so far it ain't good. It seems to me that Leatherman designed these tools to be versatile, and tool duplication is kind of headed in the opposite direction. And as for the scissors, I'd like to see the old Wave/PST II scissors in it.
Def
-
..in case it wasn't obvious I was just teasing you Def.
Well tough- it's too late to call off the sniper now! :P
Def
-
With those scissors and the diamond file I think the old PST II was one of LM's best tools. If only the implements locked, we'd be set!
Def
-
I'll have to agree with Def a little here, the settup in the xti model doesn't work for me. But I see it as a good option for someone who needs multiple screwdrivers and doesn't carry the sheath (i dont carry the sheath, but the Ti setup still works for me).
About the steel on the serrated blade, I actually would be disapointed if they changed it to a "fancy" steel. If I need to do something that might dull the blade badly, I like to do it on a blade that I know I can resharpen. I once tried to cut of a blown tire off the rim by the side of the road. After sawing at it with my serrated knife (KF4 actually) I realized I was trying to cut through some thick steel cables that would have dulled any knife! I looked at my edge and it was completely folded over.
But when I got home a few minutes on the sharpmaker made it good as new. I don't think s30v would have served me that well in that situation, so I like the options.About the file scraping: well... I guess they can't catch everything. Mine does the same thing and it annoyed me at the begining but I'm almost over it by now. Almost. ;) I posted a few of my thoughts over on LM's QC on this thread: /topic/1117
And lastly about the Titanium handles, I agree that there's not that big of a technical advantege. I personally really like the look and feel of the Charge models. I like the "full scale" as opposed to the partial on on the waves. If you tried to make the same design out of steel, it certainly would add some weight compared to the wave models. I'm actually not much of a "ti" guy, but I do enjoy it's use here. (notice I said "enjoy" not need, so I'm not really disagreeing with Def at all :) )
-
Fancy trash. Get rid of it and buy a core. It's the only tool that really works.
-
For cripes sake! I go to work in the morning, everything's fine. I come home from work in the evening, and this whole place is in an uproar because somebody is dissin' the Charge!

Seriously though, I have to agree with Def on one thing; the price they are asking for the Charge models is too high. Other than that, it's a premium tool. The size of the handles and pliers fit me perfectly, and no other multitool has a one-hand-opening knife blade setup that can compare.
The Ti arrangement happens to work better for me than the XTi, but that's just me. I can see where some folks would really like the twin bit holders. Personally, I need the scissors instead. I'm thinking the majority of Charge buyers do too, that's why Leatherman went with the arrangement they did on the new TTi.
I must admit, I've never used (or had an occasion to use) a cutting/gutting hook like the XTi has. I suppose it is there "just in case" a person ever needs it, like so many other functions on a multitool. I have used the removable pocket clip on many occasions, and the removable lanyard ring twice. Both work well. And if you need a more secure lanyard attachment, don't forget that the Charge has a "hidden" one in the end of one handle.
And the titanium? Yah, it's mostly for show, but it has some function as well. Pick up a New Wave some day and compare. Same size tools, but like NeitherExtreme said, the titanium has a much better look and feel and grip about it. Worth it in my opinion.
-
Hidden Lanyard ring? I forgot all about that!
It didn't take me long to locate it, but it did take me a moment to figure out how to get it out! No longer will the world have to look in two places for squirrels and provolone cheese!
Def
-
So let me get this straight- the XTi duplicates the bit holder and the lanyard ring, then has a pocket clip and a sheath and no one sees the redundancy on this thing?
I think it's a decent tool- very comfortable size and grip (unless you grab the wrong side and have the pocket clip on) and I also like the broader blade than the Wave, but I think that the tool compliment could have been better thought out. It almost strikes me as something that the design team was going over budget on and finished it up in a hurry because the presentation was in an hour...
Def
-
@Defender said:
So let me get this straight- the XTi duplicates the bit holder and the lanyard ring, then has a pocket clip and a sheath and no one sees the redundancy on this thing?
DefI (and some others) hate carrying a sheath. But, if you're willing to carry the sheath, then you are 100 percent, without a doubt, and most certainly... correct. IMHO of course ;)
-
I dunno- opinions like that could get you in some serious trouble around here!
Def
-
@Defender said:
So let me get this straight- the XTi duplicates the bit holder and the lanyard ring, then has a pocket clip and a sheath and no one sees the redundancy on this thing?I think it's a decent tool- very comfortable size and grip (unless you grab the wrong side and have the pocket clip on) and I also like the broader blade than the Wave, but I think that the tool compliment could have been better thought out. It almost strikes me as something that the design team was going over budget on and finished it up in a hurry because the presentation was in an hour...
Def
I think redundancy is a good thing when speaking of carry options. I use sheaths maybe 10% of the time but would use a pocket clip 100% of the time if one was offered on more multi-tools. Being that the design for the Charge/New Wave series pocket clip system is unobtrusive and adds no weight to the tool I think it's a excellent set-up and actually compliments the sheath. There a no extra screws, no extra visible holes and the clip can be put on and taken off with no tools and stored in the sheath.
-
I think redundancy is a good thing when speaking of carry options
I agree- that's why I carry a SAK and a multi most of the time! But if you lose, misplace or break your tool and it's your backup, then you are without that too.
I am not arguing about the pocket clip design, and to be honest, I like the fact that Leatherman chose to include it so folks could decide for themselves rather than making folks have to buy it separately. It's a well designed, functional clip and that's a good thing.
The problem is with the number of redundancies when it could have been made more versatile by adding different tools. I would have preferred some kind of in-tool carry method for extra bits other than a second driver. If the scales were made a little thicker for example, then extra bits could be carried in cutouts in the handle similar to the way some of the LM knives are set up. Then the extra bits would be handy and you'd have the extra space on the inside for something like scissors.
Def
-
ok my thoughts on all of this....
The clip is a wonderfull idea, the ability to remove to put it on it's great, sometimes I feel like using a sheath and sometimes I don't. I even bought an extra clip cause the first month I had my wave I broke the clip off the tool. The titanium I do think is just for a cool factor since not much is scarificed in the weight dept, the only thing it contributes is adding texture to the surface of the too enabling you to get a better grip. It's sad that both blades are not 154/s30v but the plain edge is designed to be your main blade and the other to accompany it. So the main blade is going to hold an edge longer. Redundancy of tools, I like having the two drivers, keeps me from carying a bit kit around, although I do need one. The Xti is a great tool, but like with all tools, they have thier shortcommings. Leatherman is constantly changing and innovating the models that are released to the market. Some of thier ideas are good ones, some not so good (Flair anyone?) So if something isn't perfect everyone blames it on QC, I agree some QC differs from tool to tool but no one is perfect, take a look at Def's Sideclip to see an example of that! If anything was that much of a problem, something would have been done about it a long time ago, with recalls or such. In short, we all love what comes out of Leatherman and everyone is entitled to thier own opinion, Def has his and I have my own, he and I disagree on alot of things, that is why we work together. Without this we wouldn't get to see the two sides of the coin and help make this place better all the time.
sigh No too is perfect, and until one comes along.....flaws will be found and complaints will be filed (no pun intened). Until then enjoy what good things are produced by industry.
David
-
I must admit, I've never used (or had an occasion to use) a cutting/gutting hook like the XTi has. I suppose it is there "just in case" a person ever needs it, like so many other functions on a multitool. I have used the removable pocket clip on many occasions, and the removable lanyard ring twice. Both work well. And if you need a more secure lanyard attachment, don't forget that the Charge has a "hidden" one in the end of one handle.
Does nobody use the cutting hook to open boxes or envelopes at work? Its excellent for that, its probably the most used tool on my Charge, plus it saves the razor edge I got from the factory on my main blade, cant wait to try it out on a fish this Summer aswell.
-
As a matter of fact I do, the gutting hook on the charge is real good for opening boxes and cutting stuff like the plastic ties the put on little kids toys, just stick the hook in there and pull. It's funny, designed to gut animals and we find another use O0
David
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login
