A "how-to" for basic SAK mods. Pic heavy.
-
That's right. As long as you use the right outer liner with the right blade you'll be OK. :)
-
Thank you much for the help Gareth, very good explanations and pics, that's how I will manage to do my first attempt to modifications

-
-
Thank you for a great walkthrough, Gareth!
I'm currently summoning the courage\waiting for parts & knives to arrive before diving into a mod to make my dream SAK, and this post will be my holy book. Can't wait!
Thanks for the inspiration, and I'll post pics of my journey.
-
@George S said:
Thank you for a great walkthrough, Gareth!I'm currently summoning the courage\waiting for parts & knives to arrive before diving into a mod to make my dream SAK, and this post will be my holy book. Can't wait!
Thanks for the inspiration, and I'll post pics of my journey.
All the best George and I look forward to seeing your work.

-
Woo hoo: first mod done!!
I present the... Al Fresco!

(I was to excited to photograph it & show the world before final cleaning & polishing...)This SAK isn't the dream SAK I'm hoping to make shortly, but a practice SAK for that dream SAK involving throwing some 'spare' SAK parts together.
Once again, a thousand thanks for the inspiration & how-to, Gareth; your original write-up has been invaluable.
I'll make up a thread for the process in the very near future.
-
Congrats George - nice mod and love the name.

I look forward to your dream SAK

-
Its very nice! :D

-
-
Stupid question, but i got 2.5 mm thingies and i need to get them all three down to sub 2.25 mm, I have tried most things (usually including it being the 'bit' in a powertool to rotate the thingie fast while sanding it).
I cant really get any where, do i use too fine of a paper for it? i only got 800 and finer paper. Any advice would be grateful as i feel im stuck at an easy step of the whole really fun adventure!

-
I use 100-200 grit mainly for smoothening and a metal file for thinning. I'd say that you need to be more aggressive on the rod thingys.

And yes, I spin them on the drill.
Good luck.
-
How about deleting the brass pins/bushings and using M2 X10mm panhead screws with corresponding nuts to put my SAK back together?
Anyone try this?
-
That's a very nice how to for sak write up
Very well explained and good photos

-
Thank-you.

However you did make me look to see when I first wrote this and I suddenly feel a lot older than I did five minutes ago. :-\
;)
-
@nikdanger said:
How about deleting the brass pins/bushings and using M2 X10mm panhead screws with corresponding nuts to put my SAK back together?
Anyone try this?
People have. The scales clip nicely onto the bushings.
Welcome to the boards nik. 
-
-
@bingofuel said:
Very cool, this makes it so much easier than reading 10 different threads covering 10 different aspects of modding. I may even give this a go sometime soon. If I may make a suggestion, can you please clarify the pin diameters for each frame size, just so there's no confusion? e.g.91mm: 2.5mm outer, 2.2mm (2.25) center
84mm: ?
74mm: ?
58mm: ?What about sizes for Wenger 85mm knives?
Charles.
-
All 2.5 mm, apparently.
-
That sounds right to me.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login