Lansky sharpening system users.......
-
ARISE!!!!!


I'm in this club for about a month now........what's the oil for?

I've got the kit with the 5 stones, I think the jaws were bent in transport, but hey, I can't have nice things so......

Feel I need to buy or build a pedestal, get the diamond stones as well as the rounded ones for recurves....
-
@Gerhard Gerber said:
ARISE!!!!!

I'm in this club for about a month now........what's the oil for?

I've got the kit with the 5 stones, I think the jaws were bent in transport, but hey, I can't have nice things so......

Feel I need to buy or build a pedestal, get the diamond stones as well as the rounded ones for recurves....
Oil is to clean the stones, when they get gunky with metal they get a sheen to them, and loss their effectiveness. Oil will float the shavings so they can be wiped off!
My clamp was absolute garbage!! Still finding ways to try and improve it.
-
I have the 4 stone diamond system. It is great for recontouring a broken blade or for putting a new edge on a badly neglected knife but for everyday use I like the Eze lap freehand sharpeners followed by the vic pocket ceramic sharpener.
-
@NKlamerus said:
Oil is to clean the stones, when they get gunky with metal they get a sheen to them, and loss their effectiveness. Oil will float the shavings so they can be wiped off!My clamp was absolute garbage!! Still finding ways to try and improve it.
Do you apply the oil while using the stones, or to clean afterwards?
I need practice, still get better results with the baby belt grinder and polisher, but I nicely stuffed up a new edge with the belt grinder, using the Lansky in future.
-
@Gerhard Gerber said:
Oil is to clean the stones, when they get gunky with metal they get a sheen to them, and loss their effectiveness. Oil will float the shavings so they can be wiped off!
My clamp was absolute garbage!! Still finding ways to try and improve it.
Do you apply the oil while using the stones, or to clean afterwards?
I need practice, still get better results with the baby belt grinder and polisher, but I nicely stuffed up a new edge with the belt grinder, using the Lansky in future.
I usually do it during, I feel like it help lubricates the cutting.
I would strongly recommend the sharpie trick so you can keep track of the edge on every stone.
The stand they sell is pretty bad IMO, I use a small 3" bench vice or hold the actual tool in my hand if the blade hasn't been removed
-
I oil the stones whilst using them. Just a few drops on each is enough.
The clamp on mine sucks too, and is too big for SAKs. I need to come up with a Edge Pro-like solution if I can.
-
Thanks guys, probably saved me a few $$$

If it wasn't made out of smurf metal you could crank down and really hold onto the blade.....
Was there an update to the kit? on some YT videos the clamp has rubber at the jaw?
-
Deluxe Sharpening system is what I regularly use these days... and 25° angle... and strop afterwards...

Tried the sharpmaker for a while but sometimes my bevels are wider at the tip. And couldn’t even get factory sharp edges...
No problems with the Lansky... Didn’t go for the optional stand as my mini bench vice is sufficient enough... I also do freehand with these stones for my 58mm blades...
Sharpmaker is now used mainly to sharpen scissors...
Sent from my iPhone using Tapatalk
-
@Gerhard Gerber said:
Thanks guys, probably saved me a few $$$
If it wasn't made out of smurf metal you could crank down and really hold onto the blade.....
Was there an update to the kit? on some YT videos the clamp has rubber at the jaw?
Yep, there's a newer version with the rubber. Mine is the old pot metal (sintered?) version too. I've found it functional for most knives, but you definitely can't do much with especially large or small blades. It's a great system for the price. I got the 5-stone system for $32, and it's been a fantastic value. Added a sapphire stone to the lineup, but I still need to get the strop.
And on the topic of Japanese Kershaws, I'm pretty sure they are indeed AUS8.
-
I had the version with the rubber pads and ended up ripping them off.
Blue tape works best, I might try and dip the tips into liquid flex seal.
-
@Poncho65 said:
Stropping is a step I often overlook and forget
I usually just hit it a few strokes on a very fine diamond stone and it is back to shaving sharp 
**What kind of compound does everybody recommend for loading up a leather strop BTW **

I'm using Bark River black or green on SAKS, 1095 AUS-8 and other lower carbon steels.
I don't think you need diamond compound until you get into the high carbon vanadium steels. -
Why am I not surprised I bought the old version

And on the topic of Japanese Kershaws, I'm pretty sure they are indeed AUS8

Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login