Spirit 30 day Challenge with a few Early- early Birds
-
So G-Man, with your knowladge of antiques have you ever actualy churned butter? There's little in this world better than fresh backed bread toasted with hand churned butter. A true lost art.

-
Day 25
Replaced screw-in shelf supports with plastic pins.

-
@Douglas said:
So G-Man, with your knowladge of antiques have you ever actualy churned butter? There's little in this world better than fresh backed bread toasted with hand churned butter. A true lost art.

Admittedly, I have made churned butter, but used the electric motor assembly instead. Nearly identical to this one on ebay.
https://m.ebay.com/itm/Gem-Dandy-Standard-Electric-Churn-MOTOR-Model-M26A-Butter-Alabama-Mfg-Co-/112770437528
So much better than store butter. But, as much as I enjoyed it, the cleanup was an issue.
Real milk is difficult to acquire in town as well. :ahhh -
C'mon Nix just cause you started early don't let ya off the hook. There's still 16 days to go....
DAY 14
Feeling ALMOST HUMAN again so actually checked the mail
Good to hear you are back on track. Are that a wera set?
[It's not failure if you learn something from it]
Thanks and good eye.
This makes my 3rd Wera set. Got my first one almost 2 years ago and love it. IMO one would be hard pressed to find a better quality set of drivers. But if not familiar with them the steal is carbon steal so keep them oiled and dry. I actually WD40 my set in the case every couple of weeks so the case helps protect from undesired moisture. I also have gained a love afair with Knipex Cobra and Pliars Wrenches and expect to be expanding my arsonal of them as well. It would happen faster but now I have to pay the doctors. My wife got this crud too, so I don't even want to think about the bills on the way. Doctors sure love to bill you after they tell you not to work. I guess they must think our money grows on trees and we work to have fun. -
Good to hear that except for the bill of course..
I have a över 30 years old wera bit holder screwdriver with an orange handle.. The best I have ever laid my hands on, it is my father's old one, I don't ever think I will have to by another one and I paired it with a kamaza bitset
[It's not failure if you learn something from it]
-
Day 15
Changed the dimmer fory kitchen light

and pagage opening duty! A Wenger soldier 88 [emoji3] my birthday SAK






[It's not failure if you learn something from it]
-
Day 26:
Serviceround again.
Repairing and expanding systems.

-
Awesome BYSAK & unboxing photos, kottskrapa!

-
Day 25,
because inside, in-work pics are usually bad in light, angle and elegance, I took them outside after doing what had to be done
more time, no hurry, better light, win-win!

-
Good light!

-
Day 26: Putting up new blinds.
-
Just a question to the guys in this challenge with models that have the scissors... Got the chance to try it out?
Sent from my iPhone using Tapatalk
-
[quote author=gerleatherberman link=topic=75237.msg1621787#msg1621787 date=1516656840]
Day 13. Working on stuff in the home workshop.That must be quite a serious home workshop you have there [emoji1303]
Thank you, alexanderre! The shop is geared towards antiques restoration, so the need for many small pieces and screws seems endless. :ahhh
Aha!
What's the age on this thing?

Sitting area removed for sanding.It's a long shot, but hey...
Quite difficult to date those cast iron base stools, but 1880s-1920s would be my best guess without examining the way the base and seat mount are cast. The long well-formed height screw places it around or after the industrial revolution. There are some reproductions, but I would bet that is an old one, because the base is fairly small compared to the seat size.
Please show us what it looks like when the seat top is done!
Day 14: Spirit didn't get any action today. Just did some yard work and raked leaves.
[/quote]Great help! Thanks!
Any thought about the value? -
Day 23
Replaced the cable on an extension lead using the spirit. The cutters are a bit small for chopping through a 3 core 1.5mm cable, but are great for wire stripping of the 3 cores. The chisel/scraper is great for scoring the outer insulation to make stripping it off easier. No actions shot. I'll try and get one tonight when I change the spur for the immersion heater.
-
@jaya_man said:
Just a question to the guys in this challenge with models that have the scissors... Got the chance to try it out?I've used the scissors several times. My scissors are stock, no modifications. They are great! I don't think any scissors will ever replace my 93mm Victorinox scissors as a favorite, but the Spirit scissors are really good, exceeding my expectations.
I've used them to trim finger nails, cut paper, snip heavy thread, and open some plastic packages. Excellent every time. I keep thinking it would be nice if the jaws opened up wider, but then I haven't really run into a need for that yet.
-
Just a question to the guys in this challenge with models that have the scissors... Got the chance to try it out?
I've used the scissors several times. My scissors are stock, no modifications. They are great! I don't think any scissors will ever replace my 93mm Victorinox scissors as a favorite, but the Spirit scissors are really good, exceeding my expectations.
I've used them to trim finger nails, cut paper, snip heavy thread, and open some plastic packages. Excellent every time. I keep thinking it would be nice if the jaws opened up wider, but then I haven't really run into a need for that yet.
That’s good to hear... noticed how the blades on the scissors are positioned... It’s the reason why I’m still not used to spirit scissors... and now SOG is doing the same with the scissors on their new models.
Sent from my iPhone using Tapatalk
-
Day 26:
Tested the Spirit scissors on some heavier cord:

Worked well, but I did need to hold the cord to prevent it from slipping forward as the jaws closed.
Used the scissors on my Compact to cut the same cord. The jaws gripped the cord as they cut, so the cord did NOT need to be held to make the cut. Win: Compact, 91mm scissors.
-
Just a question to the guys in this challenge with models that have the scissors... Got the chance to try it out?
I've used the scissors several times. My scissors are stock, no modifications. They are great! I don't think any scissors will ever replace my 93mm Victorinox scissors as a favorite, but the Spirit scissors are really good, exceeding my expectations.
I've used them to trim finger nails, cut paper, snip heavy thread, and open some plastic packages. Excellent every time. I keep thinking it would be nice if the jaws opened up wider, but then I haven't really run into a need for that yet.
That’s good to hear... noticed how the blades on the scissors are positioned... It’s the reason why I’m still not used to spirit scissors... and now SOG is doing the same with the scissors on their new models.
Sent from my iPhone using Tapatalk
I like the scissors, the length is sufficient for snipping threads or cutting packages. But they are the wrong way round for right handers and more filigrane cutting his harder that way. I guess that’s how lefties feel most of the time.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login
