Spirit 30 day Challenge with a few Early- early Birds
-
Awesome BYSAK & unboxing photos, kottskrapa!

-
Day 25,
because inside, in-work pics are usually bad in light, angle and elegance, I took them outside after doing what had to be done
more time, no hurry, better light, win-win!

-
Good light!

-
Day 26: Putting up new blinds.
-
Just a question to the guys in this challenge with models that have the scissors... Got the chance to try it out?
Sent from my iPhone using Tapatalk
-
[quote author=gerleatherberman link=topic=75237.msg1621787#msg1621787 date=1516656840]
Day 13. Working on stuff in the home workshop.That must be quite a serious home workshop you have there [emoji1303]
Thank you, alexanderre! The shop is geared towards antiques restoration, so the need for many small pieces and screws seems endless. :ahhh
Aha!
What's the age on this thing?

Sitting area removed for sanding.It's a long shot, but hey...
Quite difficult to date those cast iron base stools, but 1880s-1920s would be my best guess without examining the way the base and seat mount are cast. The long well-formed height screw places it around or after the industrial revolution. There are some reproductions, but I would bet that is an old one, because the base is fairly small compared to the seat size.
Please show us what it looks like when the seat top is done!
Day 14: Spirit didn't get any action today. Just did some yard work and raked leaves.
[/quote]Great help! Thanks!
Any thought about the value? -
Day 23
Replaced the cable on an extension lead using the spirit. The cutters are a bit small for chopping through a 3 core 1.5mm cable, but are great for wire stripping of the 3 cores. The chisel/scraper is great for scoring the outer insulation to make stripping it off easier. No actions shot. I'll try and get one tonight when I change the spur for the immersion heater.
-
@jaya_man said:
Just a question to the guys in this challenge with models that have the scissors... Got the chance to try it out?I've used the scissors several times. My scissors are stock, no modifications. They are great! I don't think any scissors will ever replace my 93mm Victorinox scissors as a favorite, but the Spirit scissors are really good, exceeding my expectations.
I've used them to trim finger nails, cut paper, snip heavy thread, and open some plastic packages. Excellent every time. I keep thinking it would be nice if the jaws opened up wider, but then I haven't really run into a need for that yet.
-
Just a question to the guys in this challenge with models that have the scissors... Got the chance to try it out?
I've used the scissors several times. My scissors are stock, no modifications. They are great! I don't think any scissors will ever replace my 93mm Victorinox scissors as a favorite, but the Spirit scissors are really good, exceeding my expectations.
I've used them to trim finger nails, cut paper, snip heavy thread, and open some plastic packages. Excellent every time. I keep thinking it would be nice if the jaws opened up wider, but then I haven't really run into a need for that yet.
That’s good to hear... noticed how the blades on the scissors are positioned... It’s the reason why I’m still not used to spirit scissors... and now SOG is doing the same with the scissors on their new models.
Sent from my iPhone using Tapatalk
-
Day 26:
Tested the Spirit scissors on some heavier cord:

Worked well, but I did need to hold the cord to prevent it from slipping forward as the jaws closed.
Used the scissors on my Compact to cut the same cord. The jaws gripped the cord as they cut, so the cord did NOT need to be held to make the cut. Win: Compact, 91mm scissors.
-
Just a question to the guys in this challenge with models that have the scissors... Got the chance to try it out?
I've used the scissors several times. My scissors are stock, no modifications. They are great! I don't think any scissors will ever replace my 93mm Victorinox scissors as a favorite, but the Spirit scissors are really good, exceeding my expectations.
I've used them to trim finger nails, cut paper, snip heavy thread, and open some plastic packages. Excellent every time. I keep thinking it would be nice if the jaws opened up wider, but then I haven't really run into a need for that yet.
That’s good to hear... noticed how the blades on the scissors are positioned... It’s the reason why I’m still not used to spirit scissors... and now SOG is doing the same with the scissors on their new models.
Sent from my iPhone using Tapatalk
I like the scissors, the length is sufficient for snipping threads or cutting packages. But they are the wrong way round for right handers and more filigrane cutting his harder that way. I guess that’s how lefties feel most of the time.
-
[quote author=alexanderre link=topic=75237.msg1621968#msg1621968 date=1516687808]
[quote author=gerleatherberman link=topic=75237.msg1621787#msg1621787 date=1516656840]
Day 13. Working on stuff in the home workshop.That must be quite a serious home workshop you have there [emoji1303]
Thank you, alexanderre! The shop is geared towards antiques restoration, so the need for many small pieces and screws seems endless. :ahhh
Aha!
What's the age on this thing?

Sitting area removed for sanding.It's a long shot, but hey...
Quite difficult to date those cast iron base stools, but 1880s-1920s would be my best guess without examining the way the base and seat mount are cast. The long well-formed height screw places it around or after the industrial revolution. There are some reproductions, but I would bet that is an old one, because the base is fairly small compared to the seat size.
Please show us what it looks like when the seat top is done!
Day 14: Spirit didn't get any action today. Just did some yard work and raked leaves.
[/quote]Great help! Thanks!
Any thought about the value?
[/quote]
Only issue with value is the location of sale and cost to ship. You might want to look around ebay for something similar close to your location. In the store I work at in Alabama, we usually get about $85 with the seat recovered or refinished. Doesn't seem like much, but there were a lot of those stools produced. If it is marked with a brand and date on the iron casting, then it will possibly have more value.

-
I haven't really had any complaints about my scissors either
Thought that them not opening as far would hinder me but so far it hasn't
I also have left them unmodded so far 
-
[quote author=gerleatherberman link=topic=75237.msg1622118#msg1622118 date=1516715622]
[quote author=alexanderre link=topic=75237.msg1621968#msg1621968 date=1516687808]
[quote author=gerleatherberman link=topic=75237.msg1621787#msg1621787 date=1516656840]
Day 13. Working on stuff in the home workshop.That must be quite a serious home workshop you have there [emoji1303]
Thank you, alexanderre! The shop is geared towards antiques restoration, so the need for many small pieces and screws seems endless. :ahhh
Aha!
What's the age on this thing?

Sitting area removed for sanding.It's a long shot, but hey...
Quite difficult to date those cast iron base stools, but 1880s-1920s would be my best guess without examining the way the base and seat mount are cast. The long well-formed height screw places it around or after the industrial revolution. There are some reproductions, but I would bet that is an old one, because the base is fairly small compared to the seat size.
Please show us what it looks like when the seat top is done!
Day 14: Spirit didn't get any action today. Just did some yard work and raked leaves.
[/quote]Great help! Thanks!
Any thought about the value?
[/quote]
Only issue with value is the location of sale and cost to ship. You might want to look around ebay for something similar close to your location. In the store I work at in Alabama, we usually get about $85 with the seat recovered or refinished. Doesn't seem like much, but there were a lot of those stools produced. If it is marked with a brand and date on the iron casting, then it will possibly have more value.

[/quote]Thanks!
No date or manufacturer but hard to come by here.
I payed €40 so I think I'm safe :D -
I'm afraid I may have lost my Spirit... :ahhh
:'( -
Dont even know what day im on. Think this is 13/14


-
@Mechanickal said:
I'm afraid I may have lost my Spirit... :ahhh
:'(:ahhh :ahhh :ahhh
I would never lose a SAK.....again....and this time, I mean it!

-
Day 24
Replacing the spur outlet for my immersion heater. One of the little bumps that pushes the contacts had broken off
2018-01-24_06-15-09 by Kevin Davey, on Flickr
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login


