Shop projects
-
As Rob started us off on ball peen hammers I have found it useful to have a clean and shiny ball when peening

Need a ball polisher


-
Make a wooden cup

With a 6mm bolt

Load up with 'sand' paper

Shiny


Sorted :D

-
Thanks Kev

-
You are the man Tony!

-
Nice ball polisher :D
-

:D

-
Very interesting, good job

JR -
Looks like you're about ready for new wooden mallet
-
Your not far wrong Mate

Another one on the project list :D
-
Nice shiny ball, Tony

-
Not really a shop project, more like project: shop

It's taken me a couple of months to get to this stage, but having taken another carload of junk to the tip and shifted all of the firewood up into the cellar I can finally move around in the workshop. I'm not sure what the final arrangement is going to be, but I'll probably end up with one clean bench for assembly and measurement work and one dirty bench for drilling and grinding. The grey bench to the left I liberated from work. The brown one at the far end was going to be thrown out by my son's school - it's a 2.5m x 0.8m piece of particleboard desktop on some old kitchen cabinets. There are two 1.2m LED ceiling lights, and a 100W-equivalent spot light over each bench.Not sure what the next step is - sort the storage properly, and get some floor tiles down, probably.
-
@hiraethus said:
Not really a shop project, more like project: shop

It's taken me a couple of months to get to this stage, but having taken another carload of junk to the tip and shifted all of the firewood up into the cellar I can finally move around in the workshop. I'm not sure what the final arrangement is going to be, but I'll probably end up with one clean bench for assembly and measurement work and one dirty bench for drilling and grinding. The grey bench to the left I liberated from work. The brown one at the far end was going to be thrown out by my son's school - it's a 2.5m x 0.8m piece of particleboard desktop on some old kitchen cabinets. There are two 1.2m LED ceiling lights, and a 100W-equivalent spot light over each bench.Not sure what the next step is - sort the storage properly, and get some floor tiles down, probably.
Very nice Chris, the only thing I can think of to add which will make life a lot more comfortable is a daylight lamp for working on things. like this one https://www.cousinsuk.com/product/tube-bench-lights-daylight
-
Make one of these lights for that nice table, I think there freaking great!
JR

-
Good idea both, thanks. The anglepoise spots both have 6500K 1500lm daylight LEDs in, and the strips are 4000K 2000lm cool white, so it should be an OK place to work. I've not been down there in the dark yet though.
-
@hiraethus said:
Good idea both, thanks. The anglepoise spots both have 6500K 1500lm daylight LEDs in, and the strips are 4000K 2000lm cool white, so it should be an OK place to work. I've not been down there in the dark yet though.That’s one reason I love that arch, it’s such a good cool clear white, but being that arch there’s no shadows.
JR -
Clean, Tidy

Nice Mate

-
So I have been thinking about your workshop :ahhh
Two bits of advice I would give is paint all the walls/ceiling white before you get it all sorted (something I didn't do and regret now :( )
And get yourself an offcut of thick carpet to stand on in front of the bench,
It will make it less tiring to work on and protect any stuff when it falls on the floor

Oooh, Tiles! You need to get some big ol ceramic tiles :ahhh

-
Yeah, definitely want to paint the walls - unfortunately the roof needs to come off at some point (leaky asbestos!) so I’ll do it after that gets done.
Good idea about the floor tiles - do you know where I might get some?

-
Nice workshop

Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login
