Bending a LM tool
-
@Fuzzbucket said:
If you hit with a hammer, it'll just snap off. You'll have to heat it up with a torch first. Good luck!Or like Mechy says, get Pablo to do it!
Doesn't heating steel make it "un-steel"? AFAIK heating up a hardened and processed steel makes interferes with the molecular structure and softens it.

-
If you hit with a hammer, it'll just snap off. You'll have to heat it up with a torch first. Good luck!
Or like Mechy says, get Pablo to do it!
Doesn't heating steel make it "un-steel"? AFAIK heating up a hardened and processed steel makes interferes with the molecular structure and softens it.

Yeah I imagine it will, but there is no other way that I can think of. If indeed leatherman do heat treat components like can-openers etc...?

-
Whatever metal/tempering Leatherman uses, the metal tends to snap, not bend. I've seen a lot more broken implements than severely bent ones on Leatherman tools. So, yes, heating would be crucial.
-
@Fuzzbucket said:
It's a horribly distinctive sound when they ping off too... (gulp)...I broke the file on a Wingman TWICE, and the phillips on a Micra. I know the 'ping' all too well. :D
-
Everything is 420, Blades are 420HC
-
@Rebelgium said:
Hi there,I'm making a custom MT and for this project I need to bend a LM can opener tool.
I just want to bend it sideways, by about 10°, and the bend distributed over the entire length of the tool. A very easy bend.Which size/type LM can opener, Wingman, Wave, Surge, OHT, other?
Bend to which side, left or right? -
Hi there,
I'm making a custom MT and for this project I need to bend a LM can opener tool.
I just want to bend it sideways, by about 10°, and the bend distributed over the entire length of the tool. A very easy bend.Which size/type LM can opener, Wingman, Wave, Surge, OHT, other?
Bend to which side, left or right?Wave size. I'll bend it to the left (looking from the top of the tool)
-
@Lynn LeFey said:
@Fuzzbucket said:
It's a horribly distinctive sound when they ping off too... (gulp)...I broke the file on a Wingman TWICE, and the phillips on a Micra. I know the 'ping' all too well. :D
My speculation: A file will be hardened, but not tempered. Leaving it very hard (as a file should be) but brittle.
I think a canopener will be tempered. That is, if it is hardened at all. So a canopener should be less brittle -
Hi there,
I'm making a custom MT and for this project I need to bend a LM can opener tool.
I just want to bend it sideways, by about 10°, and the bend distributed over the entire length of the tool. A very easy bend.Which size/type LM can opener, Wingman, Wave, Surge, OHT, other?
Bend to which side, left or right?Wave size. I'll bend it to the left (looking from the top of the tool)
Okay, no promises but if I can find a couple spares and some free time at work next week I'll do some testing.
-
Hi there,
I'm making a custom MT and for this project I need to bend a LM can opener tool.
I just want to bend it sideways, by about 10°, and the bend distributed over the entire length of the tool. A very easy bend.Which size/type LM can opener, Wingman, Wave, Surge, OHT, other?
Bend to which side, left or right?Wave size. I'll bend it to the left (looking from the top of the tool)
Okay, no promises but if I can find a couple spares and some free time at work next week I'll do some testing.
That would be great! Very interested in the results.
I'd do some testing too but I have no spares, it's a one shot deal.I've done some measurements and I need to make a correction: I'd bend the last 18mm by 20° to the left side. By the last 18mm I mean the tip of the tool, the hinge needs to stay straight.
-
[quote author=Rebelgium link=topic=75797.msg1631675#msg1631675 date=1517931675]
Hi there,I'm making a custom MT and for this project I need to bend a LM can opener tool.
I just want to bend it sideways, by about 10°, and the bend distributed over the entire length of the tool. A very easy bend.Which size/type LM can opener, Wingman, Wave, Surge, OHT, other?
Bend to which side, left or right?Wave size. I'll bend it to the left (looking from the top of the tool)
Okay, no promises but if I can find a couple spares and some free time at work next week I'll do some testing.
That would be great! Very interested in the results.
I'd do some testing too but I have no spares, it's a one shot deal.
[/quote]
:D
-
Give it a go with the one you have - if it snaps I'll send you a replacement.
-
Maybe a sketch is in order so we can get some idea of how far you're trying to bend it. And what you're trying to fit it into.
-
@ironraven said:
Maybe a sketch is in order so we can get some idea of how far you're trying to bend it. And what you're trying to fit it into.
-
Btw, off topic...
Re"belgium"?
There are others??! :ahhh :ahhh -
@Mechanickal said:
Btw, off topic...
Re"belgium"?
There are others??! :ahhh :ahhhThere are more of us out there than you'd think, but <u>most</u> of us are "the quite type" ...

;)
-
Btw, off topic...
Re"belgium"?
There are others??! :ahhh :ahhhThere are more of us out there than you'd think, but <u>most</u> of us are "the quite type" ...

;)
Brilliant!

-
Btw, off topic...
Re"belgium"?
There are others??! :ahhh :ahhhThere are more of us out there than you'd think, but <u>most</u> of us are "the quite type" ...

;)
Quite?
I don't think your spelling was quite right there!
And if you want me to stop posting, all you've got to do is ask

Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login