Shop projects
-
Not really a shop project, more like project: shop

It's taken me a couple of months to get to this stage, but having taken another carload of junk to the tip and shifted all of the firewood up into the cellar I can finally move around in the workshop. I'm not sure what the final arrangement is going to be, but I'll probably end up with one clean bench for assembly and measurement work and one dirty bench for drilling and grinding. The grey bench to the left I liberated from work. The brown one at the far end was going to be thrown out by my son's school - it's a 2.5m x 0.8m piece of particleboard desktop on some old kitchen cabinets. There are two 1.2m LED ceiling lights, and a 100W-equivalent spot light over each bench.Not sure what the next step is - sort the storage properly, and get some floor tiles down, probably.
-
@hiraethus said:
Not really a shop project, more like project: shop

It's taken me a couple of months to get to this stage, but having taken another carload of junk to the tip and shifted all of the firewood up into the cellar I can finally move around in the workshop. I'm not sure what the final arrangement is going to be, but I'll probably end up with one clean bench for assembly and measurement work and one dirty bench for drilling and grinding. The grey bench to the left I liberated from work. The brown one at the far end was going to be thrown out by my son's school - it's a 2.5m x 0.8m piece of particleboard desktop on some old kitchen cabinets. There are two 1.2m LED ceiling lights, and a 100W-equivalent spot light over each bench.Not sure what the next step is - sort the storage properly, and get some floor tiles down, probably.
Very nice Chris, the only thing I can think of to add which will make life a lot more comfortable is a daylight lamp for working on things. like this one https://www.cousinsuk.com/product/tube-bench-lights-daylight
-
Make one of these lights for that nice table, I think there freaking great!
JR

-
Good idea both, thanks. The anglepoise spots both have 6500K 1500lm daylight LEDs in, and the strips are 4000K 2000lm cool white, so it should be an OK place to work. I've not been down there in the dark yet though.
-
@hiraethus said:
Good idea both, thanks. The anglepoise spots both have 6500K 1500lm daylight LEDs in, and the strips are 4000K 2000lm cool white, so it should be an OK place to work. I've not been down there in the dark yet though.That’s one reason I love that arch, it’s such a good cool clear white, but being that arch there’s no shadows.
JR -
Clean, Tidy

Nice Mate

-
So I have been thinking about your workshop :ahhh
Two bits of advice I would give is paint all the walls/ceiling white before you get it all sorted (something I didn't do and regret now :( )
And get yourself an offcut of thick carpet to stand on in front of the bench,
It will make it less tiring to work on and protect any stuff when it falls on the floor

Oooh, Tiles! You need to get some big ol ceramic tiles :ahhh

-
Yeah, definitely want to paint the walls - unfortunately the roof needs to come off at some point (leaky asbestos!) so I’ll do it after that gets done.
Good idea about the floor tiles - do you know where I might get some?

-
Nice workshop

-
@hiraethus said:
Yeah, definitely want to paint the walls - unfortunately the roof needs to come off at some point (leaky asbestos!) so I’ll do it after that gets done.Good idea about the floor tiles - do you know where I might get some?

I might be able to find some nice blue ones after I finish my hall


-
Shame I wasn't closer Tony as could fit them for you :D That's a great size space Chris
I have the world's smallest workshop,although it suits my needs 

-
I've been tidying hammers today


Wanted to make a rack to hold the ones I use the most
old pine shelves (ply would have been a better choice of materials ::) )

Not much of a work in progress picture

Loaded, might need some adjusting and I just need to find a permanent place for it now


-
Nice rack! :D

-
:-[ :D


-
Nice Tony, but why do I have the feeling you need to be able to flip it up out of way

-
@Smashie said:
Nice Tony, but why do I have the feeling you need to be able to flip it up out of way
I can still open the drawers as it is, poor picture angle
But it's only held on by the clamp top left of the picture while I'm still working out if it's practical at the moment
it could also screw in to the roof if I can find a suitable space
;)

-
Nice job, I need something similar for the cordless tools.
JR -
Nice rack, Tony

I agree about the ply board, hope this holds up or at least can be used as a template for a rack enhancement operation
-
Yep the fingers are a bit weak, it wasn't too bad until I cut in the slots ::)
Really it was just an excuse to try out my new pocket hole jig that I bought for a future projectI did have the same kind of thing for my drills JR, it worked well but I had to take it down as I needed the space for shelves (that one was made from ply)

@TazzieRob said:
Nice rack, Tony
I agree about the ply board, hope this holds up or at least can be used as a template for a rack enhancement operation
Mmmmmmm Rack enhancement

Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login