Home solution for loose pliers pivot! Experiment!
-
@aikon2014 said:
I have 4 Rebars, one bladeless, two regular and one BO. All of them were "loose" in the pliers, no play, but loose, I personally prefer resistance in the pliers. Tried the method, took a couple of washers that were the exakt size of the pivot, clamped down with a lockable plier tool and turned. I found 1. it does matter where you clamp down on the pivot, it differed with the different Rebars. 2. It does matter which turning movement you use, i first tried to just move the clamped plier and it didn't work until I realized that I had to use a cirkular motion to really move the pivot.Great tips, I'm happy with my "renewed" Rebars :)
Hi glad you got it to work

My LM supertool was loose from day one
But this little trick made them how they should be
Well done aikon2014
-
I have 4 Rebars, one bladeless, two regular and one BO. All of them were "loose" in the pliers, no play, but loose, I personally prefer resistance in the pliers. Tried the method, took a couple of washers that were the exakt size of the pivot, clamped down with a lockable plier tool and turned. I found 1. it does matter where you clamp down on the pivot, it differed with the different Rebars. 2. It does matter which turning movement you use, i first tried to just move the clamped plier and it didn't work until I realized that I had to use a cirkular motion to really move the pivot.
Great tips, I'm happy with my "renewed" Rebars :)
Hi glad you got it to work

My LM supertool was loose from day one
But this little trick made them how they should be
Well done aikon2014
Thanks :)
-
How about a solution for frozen pliers?
.....Asking because I used my good old 2006 Wave during salt water fishing and after a couple of days the pliers got frozen shut and resisted all attempt to work them free no matter what kind of lubricant or rust corrosion I used. I tried all the YouTube and Google tricks with negative results so I stop trying and sent them for warranty repair but instead they sent me a new Wave, which is cool! 
-
@JustinCase said:
How about a solution for frozen pliers?
.....Asking because I used my good old 2006 Wave during salt water fishing and after a couple of days the pliers got frozen shut and resisted all attempt to work them free no matter what kind of lubricant or rust corrosion I used. I tried all the YouTube and Google tricks with negative results so I stop trying and sent them for warranty repair but instead they sent me a new Wave, which is cool! 
That is a good question no idea

Excellent news that they send you a brand new Wave

-
How about a solution for frozen pliers?
.....Asking because I used my good old 2006 Wave during salt water fishing and after a couple of days the pliers got frozen shut and resisted all attempt to work them free no matter what kind of lubricant or rust corrosion I used. I tried all the YouTube and Google tricks with negative results so I stop trying and sent them for warranty repair but instead they sent me a new Wave, which is cool! 
That is a good question no idea

Excellent news that they send you a brand new Wave

Well, a new (old design) Wave, not the new 2018 with new pliers ;)
-
How about a solution for frozen pliers?
.....Asking because I used my good old 2006 Wave during salt water fishing and after a couple of days the pliers got frozen shut and resisted all attempt to work them free no matter what kind of lubricant or rust corrosion I used. I tried all the YouTube and Google tricks with negative results so I stop trying and sent them for warranty repair but instead they sent me a new Wave, which is cool! 
That is a good question no idea

Excellent news that they send you a brand new Wave

Well, a new (old design) Wave, not the new 2018 with new pliers ;)
Still good of LM to send you a new/old wave

But yes a 2018 wave would of been even better
-
Btw is there any way of tightening small tools like micra, style ps, squirts and so on?
-
@aikon2014 said:
Btw is there any way of tightening small tools like micra, style ps, squirts and so on?Smallish tools peening with a punch and hammer would be best. Do it lightly though. Very lightly. Test and do again if needed.
-
I am now trying to use a different approach to this method.
-
Using a smallish vise grip to clamp down on the pivot. Make sure u are only gripping only the pivot with the "dead" side facing you.
-
Turn the right side handle or plier head instead of turning the vise grip. There's way lesser chance of slippage and scarring. As before, make a marking before you start.
See pic. You get the idea. Turning clockwise, start with the pliers handle open and turn the right side handle. Turning anti-clockwise is a bit more tricky. U need some kind of prying lever on the plier tip side to open up to turn it anticlockwise.


-
-
@Sam Lim said:
Btw is there any way of tightening small tools like micra, style ps, squirts and so on?
Smallish tools peening with a punch and hammer would be best. Do it lightly though. Very lightly. Test and do again if needed.
It worked! Tested it on both my Micra and Style CS, both scissors had a small play in it. Took a phillips head screqdriver (rather large one so the smal flat portion on the tip fit the round pivot) and whacked it with a hammer, small whacks first until I found the right force, and tadaa it worked like a charm! I suppose that there are other tools that are moore suited for this, but it worked, no play at all!
Thanks! -
why isn't this thread a sticky yet?! :ahhh ???
-
For the record I did put the tool itself outside of the edge of the table and put only the plierhead/scissorhead on the table to prevent ut all from bending. Just a small warning if anyone tries this :D
-
Btw, is there a way to do this to a OHT?
The ONLY Leatherman I ever had real play in the pliers is with an OHT that I sent back.
All the others might have been looser in the action than I like, but no play.Anyone tried something to fix the OHT pliers? :)
-
@aikon2014 said:
Btw, is there a way to do this to a OHT?
The ONLY Leatherman I ever had real play in the pliers is with an OHT that I sent back.
All the others might have been looser in the action than I like, but no play.Anyone tried something to fix the OHT pliers? :)
I did. The turning method didn't work on OHT pliers. The pivot is extremely tough. U can hit it pretty hard with the peening method with very little visible scarring. But from factory, most OHT I have seen have some form of misalignment at the tip. I have never seen one thats perfect before.
-
@Sam Lim said:
Btw, is there a way to do this to a OHT?
The ONLY Leatherman I ever had real play in the pliers is with an OHT that I sent back.
All the others might have been looser in the action than I like, but no play.Anyone tried something to fix the OHT pliers? :)
I did. The turning method didn't work on OHT pliers. The pivot is extremely tough. U can hit it pretty hard with the peening method with very little visible scarring. But from factory, most OHT I have seen have some form of misalignment at the tip. I have never seen one thats perfect before.
It's such a shame :( I would love to have a single hand tool for fishing situations, but no dice with the OHT :(
-
@Sam Lim said:
Btw, is there a way to do this to a OHT?
The ONLY Leatherman I ever had real play in the pliers is with an OHT that I sent back.
All the others might have been looser in the action than I like, but no play.Anyone tried something to fix the OHT pliers? :)
I did. The turning method didn't work on OHT pliers. The pivot is extremely tough. U can hit it pretty hard with the peening method with very little visible scarring. But from factory, most OHT I have seen have some form of misalignment at the tip. I have never seen one thats perfect before.
It's such a shame :( I would love to have a single hand tool for fishing situations, but no dice with the OHT :(
Well most still grip and cut without any noticeable problems. So I think it's still a good tool.
-
Some discussion about it here: /post/1575499
-
I just did the method on my new Juice S2, interesting enough, I had to turn it counter clockwise, unlike the Rebars and Wave's which I did clockwise to tighten.
I first tried to do clockwise with the Juice, and it loosened, so I reversed it and it tightened. I wonder why. I had the non "rotating" surface up on all the tools while doing this. -
Sam Lim have the fix of the pliers kept and worked in the long run for you? I haven't tried mine for long enough to be able to tell.
-
@aikon2014 said:
Sam Lim have the fix of the pliers kept and worked in the long run for you? I haven't tried mine for long enough to be able to tell.To be very honest, me neither... But so far it held up.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login