Wave Plus? Charge Plus?
-
I saw a video on youtube and it said only for sale in the US, is the + tools not coming to Europe?
They are already here mate :D.



Omg! Is there any place that ships to Sweden that got them???

Heinnie in the UK will, but probably best to wait for lamnia.com
-
How does te Wave+ plierhead compare to the OHT?
-
Gerber should go in the other direction of the Wave+ and offer the Center-Drive with non-replaceable wire-cutters.
-
@ReamerPunch said:
Gerber should go in the other direction of the Wave+ and offer the Center-Drive with non-replaceable wire-cutters.Hmm, to me replaceable cutters are a God sent. They need to change it to a decent material. If leatherman can use a chunk of 154 at the same price or even cheaper, I dun see why gerber can't do that.
-
Greetings all,
I received a Charge Plus from a Polish Webshop a couple of days ago, but would welcome some advice from the Leatherman regulars
I'm really happy with the feature set (it's why I bought it after all!) but the quality control appears to be lacking..
So much so that I'm already toying around with the idea of returning it and buying a ST Spirit, or sending it to LM for a rework, but wanted to get the consensus from you guys first.
This my first LM since a bomb-proof PST I had over a decade ago.
Pliers - incredibly stiff to open, so much so that working with them now is a pain in the ass - Yeah ok, it's no biggie if it'll loosen up with time (or even after degrease/regrease routine) but is this normal?
Can opener & bit driver - so loose, they're flapping around whenever you open the tool - I've tried making the screws tight as I dare with my nails, but they only stay put for a short period - Loctite would be the answer, but should this be needed on a brand new tool!?
Main Blade - incredibly tight to deploy that it needs two hands to open comfortably, or isVERY uncomfortable to the opening thumb. The serrated blade is buttery smooth to open, so I guess the screw on the main blade side was over-torqued at the factory

File - is DULL (Compared to Victorinox) ..this thing wouldn't scare the edges off wood, let alone metal! Is this common for the new Leatherman tools?
On a happier note, the new sheath is REALLY nice, the big opening buckle is rock solid opening and closing, and my bit extender and micro torch are nicely secured due to the nylon being wide enough to cover the opposite side of the opening, preventing lateral fall-through


-
Welcome

-
The pliers are sometimes stiff to begin with but should loosen with use. The file should absolutely not be dull and the tools shouldn't be loose enough to flop open.
If it was me I would try tightening the loose tools up but the dull file would be a no go and I would return it for a replacement.
-
If you want to tight the loose tools you will probably need a set of loki- mobile wrenches, because using needle nose pliers will ruin the nice black oxide finish. I'm not sure why LM uses those knurled head pivot screws instead the 6 point star? Maybe something to do with the aluminum scales?

-
@JustinCase said:
If you want to tight the loose tools you will probably need a set of loki- mobile wrenches, because using needle nose pliers will ruin the nice black oxide finish. I'm not sure why LM uses those knurled head pivot screws instead the 6 point star? Maybe something to do with the aluminum scales?
Wow, thanks for the great tips, I've dropped loki a PM
@SteveC said:
The pliers are sometimes stiff to begin with but should loosen with use. The file should absolutely not be dull and the tools shouldn't be loose enough to flop open.If it was me I would try tightening the loose tools up but the dull file would be a no go and I would return it for a replacement.
Well calling them dull may be a slight exaggeration, but as I said, compared to Victorinox's, which I would call fairly aggressive, the LM is dull in comparison.
@Obi1shinobee said:
Welcome

Thanks, it's great to be here

-
If you want to tight the loose tools you will probably need a set of loki- mobile wrenches, because using needle nose pliers will ruin the nice black oxide finish. I'm not sure why LM uses those knurled head pivot screws instead the 6 point star? Maybe something to do with the aluminum scales?

Wow, thanks for the great tips, I've dropped loki a PM
@SteveC said:
The pliers are sometimes stiff to begin with but should loosen with use. The file should absolutely not be dull and the tools shouldn't be loose enough to flop open.If it was me I would try tightening the loose tools up but the dull file would be a no go and I would return it for a replacement.
Well calling them dull may be a slight exaggeration, but as I said, compared to Victorinox's, which I would call fairly aggressive, the LM is dull in comparison.
@Obi1shinobee said:
Welcome

Thanks, it's great to be here


-
Hope you get the problems sorted without having to return it or send it in
I think I only have one newer tool ( my New Surge from 2017) and it didn't have many or any issue
Sorry to hear about the QC not being up to snuff 
-
@Poncho65 said:
Hope you get the problems sorted without having to return it or send it in
I think I only have one newer tool ( my New Surge from 2017) and it didn't have many or any issue
Sorry to hear about the QC not being up to snuff 
Yeah thanks - I've have a couple of nights to sleep on it and I think I'm going to send it in for rework - I think it's only fair to give LM a chance to correct it.
I'm wondering whether the reason the 'plus' models aren't yet available from the German channels is due to tougher local QC standards shrugsI had a chance to test out the bit driver today, putting up some flat-pack furni
Switching between flat-head and pozi is a dream :D
If I can get past all the QC hiccups, I could see this being my favourite tool! -
Welcome ;) and sorry to hear you are disappointed.
the tool should wear and give with use,
but the loose tools are annoying and I've had that happen twice :Pmaybe (just a thought ???) if you are not used to LM Diamond files the file might seem dull, especially compared to that of Victorinox, because at the touch is noticeably smoother and doesn't *grab *things or bite into them like Vic's, even though it's harder because of the diamond?

-
@ThePeacent said:
Welcome ;) and sorry to hear you are disappointed.the tool should wear and give with use,
but the loose tools are annoying and I've had that happen twice :Pmaybe (just a thought ???) if you are not used to LM Diamond files the file might seem dull, especially compared to that of Victorinox, because at the touch is noticeably smoother and doesn't *grab *things or bite into them like Vic's, even though it's harder because of the diamond?

Yeah, I was referring to the bite of the wood/metal side, not diamond coated (which seems very nice/fine)
I tried the wood/metal side today on an off-cut of wood and it works, but needs quite lot of pressure.
I guess it could just be Leathermans cutting profile that I'm not used toThe file isn't a deal-breaker, just a little disappointing on top of my other QC issues..
Thanks for the welcome

-
Perhaps compare your file with those on other Leathermans at your nearest store? Then you will know if you got a bad one or if it's just Leatherman's files you aren't used to.
-
I saw a video on youtube and it said only for sale in the US, is the + tools not coming to Europe?
They are already here mate :D.



Omg! Is there any place that ships to Sweden that got them???

You can go to LINK REMOVED. Ships worldwide.
-
It's kind of a bummer to hear these QC issues. I was considering ordering a Wave+ as a slightly more pocket-friendly option for days where I don't have tons planned to warrant carrying my Surge. However, if there are issues with brand new tools like this, maybe I'll hold off. Maybe I'll just pick up a regular Wave instead. :-\
-
I got my Wave+ today and I'm pleased to say I have no QC issues with my tool. Actually I don't normally have issues with Leatherman tools. Only one I have ever had with a problem is my OHT, teeth don't line up but it's ok. Still functions fine but seems to be a common issue with that specific tool.
Sent from my SM-G935V using Tapatalk
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login