Wave Plus? Charge Plus?
-
If you want to tight the loose tools you will probably need a set of loki- mobile wrenches, because using needle nose pliers will ruin the nice black oxide finish. I'm not sure why LM uses those knurled head pivot screws instead the 6 point star? Maybe something to do with the aluminum scales?

-
@JustinCase said:
If you want to tight the loose tools you will probably need a set of loki- mobile wrenches, because using needle nose pliers will ruin the nice black oxide finish. I'm not sure why LM uses those knurled head pivot screws instead the 6 point star? Maybe something to do with the aluminum scales?
Wow, thanks for the great tips, I've dropped loki a PM
@SteveC said:
The pliers are sometimes stiff to begin with but should loosen with use. The file should absolutely not be dull and the tools shouldn't be loose enough to flop open.If it was me I would try tightening the loose tools up but the dull file would be a no go and I would return it for a replacement.
Well calling them dull may be a slight exaggeration, but as I said, compared to Victorinox's, which I would call fairly aggressive, the LM is dull in comparison.
@Obi1shinobee said:
Welcome

Thanks, it's great to be here

-
If you want to tight the loose tools you will probably need a set of loki- mobile wrenches, because using needle nose pliers will ruin the nice black oxide finish. I'm not sure why LM uses those knurled head pivot screws instead the 6 point star? Maybe something to do with the aluminum scales?

Wow, thanks for the great tips, I've dropped loki a PM
@SteveC said:
The pliers are sometimes stiff to begin with but should loosen with use. The file should absolutely not be dull and the tools shouldn't be loose enough to flop open.If it was me I would try tightening the loose tools up but the dull file would be a no go and I would return it for a replacement.
Well calling them dull may be a slight exaggeration, but as I said, compared to Victorinox's, which I would call fairly aggressive, the LM is dull in comparison.
@Obi1shinobee said:
Welcome

Thanks, it's great to be here


-
Hope you get the problems sorted without having to return it or send it in
I think I only have one newer tool ( my New Surge from 2017) and it didn't have many or any issue
Sorry to hear about the QC not being up to snuff 
-
@Poncho65 said:
Hope you get the problems sorted without having to return it or send it in
I think I only have one newer tool ( my New Surge from 2017) and it didn't have many or any issue
Sorry to hear about the QC not being up to snuff 
Yeah thanks - I've have a couple of nights to sleep on it and I think I'm going to send it in for rework - I think it's only fair to give LM a chance to correct it.
I'm wondering whether the reason the 'plus' models aren't yet available from the German channels is due to tougher local QC standards shrugsI had a chance to test out the bit driver today, putting up some flat-pack furni
Switching between flat-head and pozi is a dream :D
If I can get past all the QC hiccups, I could see this being my favourite tool! -
Welcome ;) and sorry to hear you are disappointed.
the tool should wear and give with use,
but the loose tools are annoying and I've had that happen twice :Pmaybe (just a thought ???) if you are not used to LM Diamond files the file might seem dull, especially compared to that of Victorinox, because at the touch is noticeably smoother and doesn't *grab *things or bite into them like Vic's, even though it's harder because of the diamond?

-
@ThePeacent said:
Welcome ;) and sorry to hear you are disappointed.the tool should wear and give with use,
but the loose tools are annoying and I've had that happen twice :Pmaybe (just a thought ???) if you are not used to LM Diamond files the file might seem dull, especially compared to that of Victorinox, because at the touch is noticeably smoother and doesn't *grab *things or bite into them like Vic's, even though it's harder because of the diamond?

Yeah, I was referring to the bite of the wood/metal side, not diamond coated (which seems very nice/fine)
I tried the wood/metal side today on an off-cut of wood and it works, but needs quite lot of pressure.
I guess it could just be Leathermans cutting profile that I'm not used toThe file isn't a deal-breaker, just a little disappointing on top of my other QC issues..
Thanks for the welcome

-
Perhaps compare your file with those on other Leathermans at your nearest store? Then you will know if you got a bad one or if it's just Leatherman's files you aren't used to.
-
I saw a video on youtube and it said only for sale in the US, is the + tools not coming to Europe?
They are already here mate :D.



Omg! Is there any place that ships to Sweden that got them???

You can go to LINK REMOVED. Ships worldwide.
-
It's kind of a bummer to hear these QC issues. I was considering ordering a Wave+ as a slightly more pocket-friendly option for days where I don't have tons planned to warrant carrying my Surge. However, if there are issues with brand new tools like this, maybe I'll hold off. Maybe I'll just pick up a regular Wave instead. :-\
-
I got my Wave+ today and I'm pleased to say I have no QC issues with my tool. Actually I don't normally have issues with Leatherman tools. Only one I have ever had with a problem is my OHT, teeth don't line up but it's ok. Still functions fine but seems to be a common issue with that specific tool.
Sent from my SM-G935V using Tapatalk
-
@David Bowen said:
I got my Wave+ today and I'm pleased to say I have no QC issues with my tool. Actually I don't normally have issues with Leatherman tools. Only one I have ever had with a problem is my OHT, teeth don't line up but it's ok. Still functions fine but seems to be a common issue with that specific tool.Sent from my SM-G935V using Tapatalk
Glad you have good luck with yours! I just found a lightly used Wave on that big auction site for a great price. The plan is to play around with a few mods, so once I install Rebar pliers I’ll end up with a Wave+ after all :D
-
@Syncop8r said:
Perhaps compare your file with those on other Leathermans at your nearest store? Then you will know if you got a bad one or if it's just Leatherman's files you aren't used to.Yes, I did this, and checked out a non-plus Charge - in comparison mine felt marginally smoother than the one in the store, but yeah you're right, it seems my expectation of the amount of bite was off..
-
My Charge+ just came back from its vacation in Solingen. After cleaning up the excess oil (which kinda smells of aniseed) I have given it a quick once-over and wanted to report back
Generally all tools are much easier to open, and before you continue reading the rest of this post, I want to clarify **I am happy! **


Pliers much smoother to open/close
Can opener & bit driver no longer flapping around and retaining nicely, but the screw (nearest the gap for the clip mount) is still loose ..is this inherent in the design, or could/should it be loctite'd?
Main blade now deploys buttery smooth - even smoother than serrated blade, but (if I'm being critical) slight lateral play when open

What's disappointing (again, being critical) is the File behind the main blade now rubs against the scale when opening/closing.
Certainly no deal-breaker, but it grinds my gears (and scales!) to hear it..
I'm wondering whether I should try bending it to create some clearanceFile same as before, but as I said in the post above, it seems my expectations were off..
Like I say, nothing is a deal-breaker, I am, by and large, a happy Charge owner once again. It's really great tool-set
If I compare it to my various Vic's (58's through 130's) and a PST from back in the day, the tolerances of the charge plus cannot be compared.
..but to quote Tony Soprano: "Whadd’ya gonna do?"
-
Yes loctite anything that's loose.
Tighten screw to reduce blade play and possibly the file rub.
Don't try to bend the file, it will most likely snap. -
@zoidberg said:
Yes loctite anything that's loose.
Tighten screw to reduce blade play and possibly the file rub.
Don't try to bend the file, it will most likely snap.Thanks for the quick feedback and tips Zoidberg - appreciated

Do I need the keys which Loki-mobile used to sell? (he's not responded to my DM and from another thread appears to no longer have them)
I read elsewhere that two sets of pliers also works. but I'm still a little cautious of stripping the coating on the Alu scales.. -
I've used blunt nosed pliers before, others have gone with vampire pliers etc.
A bit of sellotape should protect the scales if you're worried. -
I think someone ground a groove in plier jaws to make dedicated pivot removing pliers.

-
So, does anyone have a Wave or Charge Plus? Any thoughts on them?
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login