Wave Plus? Charge Plus?
-
I saw a video on youtube and it said only for sale in the US, is the + tools not coming to Europe?
They are already here mate :D.



Omg! Is there any place that ships to Sweden that got them???

You can go to LINK REMOVED. Ships worldwide.
-
It's kind of a bummer to hear these QC issues. I was considering ordering a Wave+ as a slightly more pocket-friendly option for days where I don't have tons planned to warrant carrying my Surge. However, if there are issues with brand new tools like this, maybe I'll hold off. Maybe I'll just pick up a regular Wave instead. :-\
-
I got my Wave+ today and I'm pleased to say I have no QC issues with my tool. Actually I don't normally have issues with Leatherman tools. Only one I have ever had with a problem is my OHT, teeth don't line up but it's ok. Still functions fine but seems to be a common issue with that specific tool.
Sent from my SM-G935V using Tapatalk
-
@David Bowen said:
I got my Wave+ today and I'm pleased to say I have no QC issues with my tool. Actually I don't normally have issues with Leatherman tools. Only one I have ever had with a problem is my OHT, teeth don't line up but it's ok. Still functions fine but seems to be a common issue with that specific tool.Sent from my SM-G935V using Tapatalk
Glad you have good luck with yours! I just found a lightly used Wave on that big auction site for a great price. The plan is to play around with a few mods, so once I install Rebar pliers I’ll end up with a Wave+ after all :D
-
@Syncop8r said:
Perhaps compare your file with those on other Leathermans at your nearest store? Then you will know if you got a bad one or if it's just Leatherman's files you aren't used to.Yes, I did this, and checked out a non-plus Charge - in comparison mine felt marginally smoother than the one in the store, but yeah you're right, it seems my expectation of the amount of bite was off..
-
My Charge+ just came back from its vacation in Solingen. After cleaning up the excess oil (which kinda smells of aniseed) I have given it a quick once-over and wanted to report back
Generally all tools are much easier to open, and before you continue reading the rest of this post, I want to clarify **I am happy! **


Pliers much smoother to open/close
Can opener & bit driver no longer flapping around and retaining nicely, but the screw (nearest the gap for the clip mount) is still loose ..is this inherent in the design, or could/should it be loctite'd?
Main blade now deploys buttery smooth - even smoother than serrated blade, but (if I'm being critical) slight lateral play when open

What's disappointing (again, being critical) is the File behind the main blade now rubs against the scale when opening/closing.
Certainly no deal-breaker, but it grinds my gears (and scales!) to hear it..
I'm wondering whether I should try bending it to create some clearanceFile same as before, but as I said in the post above, it seems my expectations were off..
Like I say, nothing is a deal-breaker, I am, by and large, a happy Charge owner once again. It's really great tool-set
If I compare it to my various Vic's (58's through 130's) and a PST from back in the day, the tolerances of the charge plus cannot be compared.
..but to quote Tony Soprano: "Whadd’ya gonna do?"
-
Yes loctite anything that's loose.
Tighten screw to reduce blade play and possibly the file rub.
Don't try to bend the file, it will most likely snap. -
@zoidberg said:
Yes loctite anything that's loose.
Tighten screw to reduce blade play and possibly the file rub.
Don't try to bend the file, it will most likely snap.Thanks for the quick feedback and tips Zoidberg - appreciated

Do I need the keys which Loki-mobile used to sell? (he's not responded to my DM and from another thread appears to no longer have them)
I read elsewhere that two sets of pliers also works. but I'm still a little cautious of stripping the coating on the Alu scales.. -
I've used blunt nosed pliers before, others have gone with vampire pliers etc.
A bit of sellotape should protect the scales if you're worried. -
I think someone ground a groove in plier jaws to make dedicated pivot removing pliers.

-
So, does anyone have a Wave or Charge Plus? Any thoughts on them?
-
I've got a wave plus but hadn't used it a whole lot yet. Quality control is excellent and everything works as expected. Hadn't put the pliers or cutters through any stress to test the new head but it's on my list.
Sent from my SM-T377V using Tapatalk
-
@ReamerPunch said:
So, does anyone have a Wave or Charge Plus? Any thoughts on them?I got a Wave+ the other day and had to exchange it for another. The first one had substainal blade play on the saw, file, serrated blade. The second one was better but the file still has some up and down play. This was the first time I have ever had to return a Leatherman.
-
Got the Charge + and am I glad I did!
I liked my older Wave but the Charge + just feels better. From blade deployment to hand feel, it is my favorite MT to date!
The slipperiness of the Wave was my biggest complaint. The Charge + is worth every penny.Sent from my Pixel 2 XL using Tapatalk
-
Signal Plus coming out before Wave plus and Charge Plus


-
Do the new sheaths fit two bit kit holders?
I've put a Charge AL in the old nylon sheath and with two bit kit holders the velcro flap engages at 50%. -
Great to see you Prime
sorry to hear about he QC problems :-\and welcome to
Wpgwave 
-
@ReamerPunch said:
Do the new sheaths fit two bit kit holders?
I've put a Charge AL in the old nylon sheath and with two bit kit holders the velcro flap engages at 50%.I'd be keen to hear on this as well

-
The two bit kit holders and the new Wave fit perfect but tight in the new nylon sheath but the sheath may loosen up with use. I also tried the Charge TTI and ALX and they do fit together with the two bit holders but the flap won't reach all the way down to lock it.
However, the sheath can be soaked in warm water for about 15 minutes to make it softer, put the Charge and bit kit inside, close the flap completely and let it dry. The sheath will form to the shape of the Charge making it easier to close and lock it in place. Well, that's only if you really want to carry the Charge and bit kit holder and don't mind getting them a little damp

Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login