Sharpening help.
-
@Fuzzbucket said:
Excellent kit RF52!
Thanks [emoji16] Very pleased with how well it functioned [emoji106]
Sent fra min FRD-L09 via Tapatalk
-
Here are photos of the stone side with and without flash, hopefully you can see something [emoji106]


Sent fra min FRD-L09 via Tapatalk
-
-
Oh right,
My turn!The box as delivered:

Cardboard coverbox removed:

Box opened and protective foam + manual removed:

Stones reversed:

-
@Mechanickal said:
Oh right,
My turn!The box as delivered:

Cardboard coverbox removed:

Box opened and protective foam + manual removed:

Stones reversed:

Looked very similar [emoji106] And as long as it's working the way you want it doesn't matter what it is [emoji106]
Sent fra min FRD-L09 via Tapatalk
-
@Gerhard Gerber said:
My Lansky setup & accessories....including DIY stand made using a drill bit

I need to make a stand for mine too [emoji16] looks good [emoji106]
Sent fra min FRD-L09 via Tapatalk
Good choice. You're all set for the majority of blades.
The smaller pen blades can be a challenge if you set the fixture on 17 or 20 degrees, but can usually be sharpened at 25 degrees.
The blade will still get plenty sharp.
Use the sharpie method to check if you are honing the edge.
Practise and use your thumb or eyes to " chase the burr". -
I also use the Lansky Deluxe Sharpening System... So far its working great for me... I’ve used it to sharpen my SAKs (except the 58mm), MT’s, folders and kitchen knives... and strop afterwards...
Seldom use the extra course hone except when I need to reprofile edges... The coarse hone I use on blades which have been used regularly... otherwise, its normally just the medium to extra fine hones for touch-ups...
Also thinking of getting the special hone for serrated edges...

-
@jaya_man said:
I also use the Lansky Deluxe Sharpening System... So far its working great for me... I’ve used it to sharpen my SAKs (except the 58mm), MT’s, folders and kitchen knives... and strop afterwards...Seldom use the extra course hone except when I need to reprofile edges... The coarse hone I use on blades which have been used regularly... otherwise, its normally just the medium to extra fine hones for touch-ups...
Also thinking of getting the special hone for serrated edges...
Great [emoji16]
Sent fra min FRD-L09 via Tapatalk
-
@jaya_man said:
Also thinking of getting the special hone for serrated edges...When I started looking at Lansky I figured I'd buy the basic kit and then get those rounded stones for recurves.....which I "need" for my Kukri

After getting the 4 diamond stones I feel a bit over-invested, plan on rather getting a Spyderco Sharpmaker, and where that doesn't work the belt grinder will have to suffice.
-
I do recommend freehand as well, just so you learn it abd get a feel for it, ypu can use your Lansky stones for it. And also learn stropping! Do NOT underestimate the power of the strop :D
Especially if you have a couple of them with some compound on one of them! -
@aikon2014 said:
I do recommend freehand as well, just so you learn it abd get a feel for it, ypu can use your Lansky stones for it. And also learn stropping! Do NOT underestimate the power of the strop :D
Especially if you have a couple of them with some compound on one of them!I have been thinking of getting/making a strop or two [emoji106]
Sent fra min FRD-L09 via Tapatalk
-
I do recommend freehand as well, just so you learn it abd get a feel for it, ypu can use your Lansky stones for it. And also learn stropping! Do NOT underestimate the power of the strop :D
Especially if you have a couple of them with some compound on one of them!I have been thinking of getting/making a strop or two [emoji106]
Sent fra min FRD-L09 via Tapatalk
I went to K-Rauta and got a plank which they even helped me saw into proper lengths, and then I ordered Bältes Läder at slojd-skinn.se at 4cm and just made strops with contact glue. Easy peasy! :)
I recommend this compound:https://www.sliqhaq.se/strigelpasta-micron-p-521.html?cPath=4_32_114
Just a size of a green pea will cover a rather big strop.First strop with the compund and then strop with raw leather, then you can shave with it!
-
I do recommend freehand as well, just so you learn it abd get a feel for it, ypu can use your Lansky stones for it. And also learn stropping! Do NOT underestimate the power of the strop :D
Especially if you have a couple of them with some compound on one of them!I have been thinking of getting/making a strop or two [emoji106]
Sent fra min FRD-L09 via Tapatalk
I went to K-Rauta and got a plank which they even helped me saw into proper lengths, and then I ordered Bältes Läder at slojd-skinn.se at 4cm and just made strops with contact glue. Easy peasy! :)
I recommend this compound:https://www.sliqhaq.se/strigelpasta-micron-p-521.html?cPath=4_32_114
Just a size of a green pea will cover a rather big strop.First strop with the compund and then strop with raw leather, then you can shave with it!
Thanks!
Sent fra min FRD-L09 via Tapatalk
-
The Strop is powerful indeed

Most of my sheaths are thermo-molded plastic covered with leather, people are amazed when I show them how to use the sheath as a strop.......they all think stropping starts and ends in a barber shop

-
@Gerhard Gerber said:
The Strop is powerful indeed
Most of my sheaths are thermo-molded plastic covered with leather, people are amazed when I show them how to use the sheath as a strop.......they all think stropping starts and ends in a barber shop

Yes, it is so underrated in my opinion! It is so powerful, imho at least as important as the sharpening/apexing itself.
-
Do you use the "rough" side or the smooth side of the leather to strop?
Sent fra min FRD-L09 via Tapatalk
-
@RF52 said:
Do you use the "rough" side or the smooth side of the leather to strop?Sent fra min FRD-L09 via Tapatalk
I use both, don't really think that it matters because as far as I know, it's small silicon particles in the leather that does the "sharpening", so it should be equal whatever side. But I know that others like to put compound on the suede rough side because it sticks easier and do the raw leather stropping on the flat smooth side.
-
Do you use the "rough" side or the smooth side of the leather to strop?
Sent fra min FRD-L09 via Tapatalk
I use both, don't really think that it matters because as far as I know, it's small silicon particles in the leather that does the "sharpening", so it should be equal whatever side. But I know that others like to put compound on the suede rough side because it sticks easier and do the raw leather stropping on the flat smooth side.
Thanks [emoji2] I have an old belt I'm going to make into a strop, should be long enough for a couple so I can try both and see [emoji106]
Sent fra min FRD-L09 via Tapatalk
-
Do you use the "rough" side or the smooth side of the leather to strop?
Sent fra min FRD-L09 via Tapatalk
I use both, don't really think that it matters because as far as I know, it's small silicon particles in the leather that does the "sharpening", so it should be equal whatever side. But I know that others like to put compound on the suede rough side because it sticks easier and do the raw leather stropping on the flat smooth side.
Thanks [emoji2] I have an old belt I'm going to make into a strop, should be long enough for a couple so I can try both and see [emoji106]
Sent fra min FRD-L09 via Tapatalk
I have an old belt I made into a couple of strops as well, works just as good as any other leather I tried!
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login
