Skip to content
Collapse
? [[global:guest]]
Unread Recent
HOME SEARCH PROFILE MESSAGES 0 BOOKMARKS MEMBERS BADGES
Multitool.Org Forum
MultiTool.org • Community Header Space • Watch This Space

Sharpening help.

Scheduled Pinned Locked Moved Edged Tools
63 Posts 1 Posters 2.6k Views
  1. Home
  2. Tool Talk
  3. Edged Tools
  4. Sharpening help.
Sharpening help.
  • Oldest to Newest
  • Newest to Oldest
  • Most Votes
Reply
  • Reply as topic
Log in to reply
This topic has been deleted. Only users with topic management privileges can see it.
  • Gerhard Gerber Offline
    Gerhard Gerber
    Posts: 3,832
    Gerhard Gerber Offline
    Gerhard Gerber
    wrote on last edited by
    #44 Quote Reply

      @jaya_man said:
      Also thinking of getting the special hone for serrated edges...

      When I started looking at Lansky I figured I'd buy the basic kit and then get those rounded stones for recurves.....which I "need" for my Kukri :facepalm:

      After getting the 4 diamond stones I feel a bit over-invested, plan on rather getting a Spyderco Sharpmaker, and where that doesn't work the belt grinder will have to suffice.

      1 Reply Last reply
      • aikon2014 Offline
        aikon2014
        Posts: 164
        aikon2014 Offline
        aikon2014
        wrote on last edited by
        #45 Quote Reply

          I do recommend freehand as well, just so you learn it abd get a feel for it, ypu can use your Lansky stones for it. And also learn stropping! Do NOT underestimate the power of the strop :D
          Especially if you have a couple of them with some compound on one of them!

          1 Reply Last reply
          • RF52 Offline
            RF52
            Posts: 5,787
            RF52 Offline
            RF52
            wrote on last edited by
            #46 Quote Reply

              @aikon2014 said:
              I do recommend freehand as well, just so you learn it abd get a feel for it, ypu can use your Lansky stones for it. And also learn stropping! Do NOT underestimate the power of the strop :D
              Especially if you have a couple of them with some compound on one of them!

              I have been thinking of getting/making a strop or two [emoji106]

              Sent fra min FRD-L09 via Tapatalk

              Merit Badges
              Zip Tie User Buck User Carabiner User Hook User Flashlight SOG Power Challenge Duct Tape Fire Making Outdoor Cook Hacker MTo Store User Mod User Axe User Mora User Fixed Blade Challenge Toothpick User Keychain Challenge Slasher User Traditional Folder Challenge 30 Day Axe Challenge PST 30 Day Challenge Off Brand MT Challenge Level 1 14th Anniversary Anything Goes Challenge Spyderco 30 Day Challenge The Nessmuk Challenge Camo SAK Skeletool 30 Day Challenge Poker Face Challenge LM Rebar Challenge Gas Station MRE challenge Soldier On 90 Day Challenge Folding Hunter 30 days Challenge Explorer 30 Day Challenge LM Squirt Challenge Level 2 Case XX 30 Day Challenge
              1 Reply Last reply
              • aikon2014 Offline
                aikon2014
                Posts: 164
                aikon2014 Offline
                aikon2014
                wrote on last edited by
                #47 Quote Reply

                  @RF52 said:

                  @aikon2014 said:

                  I do recommend freehand as well, just so you learn it abd get a feel for it, ypu can use your Lansky stones for it. And also learn stropping! Do NOT underestimate the power of the strop :D
                  Especially if you have a couple of them with some compound on one of them!

                  I have been thinking of getting/making a strop or two [emoji106]

                  Sent fra min FRD-L09 via Tapatalk

                  I went to K-Rauta and got a plank which they even helped me saw into proper lengths, and then I ordered Bältes Läder at slojd-skinn.se at 4cm and just made strops with contact glue. Easy peasy! :)
                  I recommend this compound:https://www.sliqhaq.se/strigelpasta-micron-p-521.html?cPath=4_32_114
                  Just a size of a green pea will cover a rather big strop.

                  First strop with the compund and then strop with raw leather, then you can shave with it!

                  1 Reply Last reply
                  • RF52 Offline
                    RF52
                    Posts: 5,787
                    RF52 Offline
                    RF52
                    wrote on last edited by
                    #48 Quote Reply

                      @aikon2014 said:

                      @RF52 said:

                      @aikon2014 said:

                      I do recommend freehand as well, just so you learn it abd get a feel for it, ypu can use your Lansky stones for it. And also learn stropping! Do NOT underestimate the power of the strop :D
                      Especially if you have a couple of them with some compound on one of them!

                      I have been thinking of getting/making a strop or two [emoji106]

                      Sent fra min FRD-L09 via Tapatalk

                      I went to K-Rauta and got a plank which they even helped me saw into proper lengths, and then I ordered Bältes Läder at slojd-skinn.se at 4cm and just made strops with contact glue. Easy peasy! :)
                      I recommend this compound:https://www.sliqhaq.se/strigelpasta-micron-p-521.html?cPath=4_32_114
                      Just a size of a green pea will cover a rather big strop.

                      First strop with the compund and then strop with raw leather, then you can shave with it!

                      Thanks!

                      Sent fra min FRD-L09 via Tapatalk

                      Merit Badges
                      Zip Tie User Buck User Carabiner User Hook User Flashlight SOG Power Challenge Duct Tape Fire Making Outdoor Cook Hacker MTo Store User Mod User Axe User Mora User Fixed Blade Challenge Toothpick User Keychain Challenge Slasher User Traditional Folder Challenge 30 Day Axe Challenge PST 30 Day Challenge Off Brand MT Challenge Level 1 14th Anniversary Anything Goes Challenge Spyderco 30 Day Challenge The Nessmuk Challenge Camo SAK Skeletool 30 Day Challenge Poker Face Challenge LM Rebar Challenge Gas Station MRE challenge Soldier On 90 Day Challenge Folding Hunter 30 days Challenge Explorer 30 Day Challenge LM Squirt Challenge Level 2 Case XX 30 Day Challenge
                      1 Reply Last reply
                      • Gerhard Gerber Offline
                        Gerhard Gerber
                        Posts: 3,832
                        Gerhard Gerber Offline
                        Gerhard Gerber
                        wrote on last edited by
                        #49 Quote Reply

                          The Strop is powerful indeed :salute:

                          Most of my sheaths are thermo-molded plastic covered with leather, people are amazed when I show them how to use the sheath as a strop.......they all think stropping starts and ends in a barber shop :like:

                          1 Reply Last reply
                          • aikon2014 Offline
                            aikon2014
                            Posts: 164
                            aikon2014 Offline
                            aikon2014
                            wrote on last edited by
                            #50 Quote Reply

                              @Gerhard Gerber said:
                              The Strop is powerful indeed :salute:

                              Most of my sheaths are thermo-molded plastic covered with leather, people are amazed when I show them how to use the sheath as a strop.......they all think stropping starts and ends in a barber shop :like:

                              Yes, it is so underrated in my opinion! It is so powerful, imho at least as important as the sharpening/apexing itself.

                              1 Reply Last reply
                              • RF52 Offline
                                RF52
                                Posts: 5,787
                                RF52 Offline
                                RF52
                                wrote on last edited by
                                #51 Quote Reply

                                  Do you use the "rough" side or the smooth side of the leather to strop?

                                  Sent fra min FRD-L09 via Tapatalk

                                  Merit Badges
                                  Zip Tie User Buck User Carabiner User Hook User Flashlight SOG Power Challenge Duct Tape Fire Making Outdoor Cook Hacker MTo Store User Mod User Axe User Mora User Fixed Blade Challenge Toothpick User Keychain Challenge Slasher User Traditional Folder Challenge 30 Day Axe Challenge PST 30 Day Challenge Off Brand MT Challenge Level 1 14th Anniversary Anything Goes Challenge Spyderco 30 Day Challenge The Nessmuk Challenge Camo SAK Skeletool 30 Day Challenge Poker Face Challenge LM Rebar Challenge Gas Station MRE challenge Soldier On 90 Day Challenge Folding Hunter 30 days Challenge Explorer 30 Day Challenge LM Squirt Challenge Level 2 Case XX 30 Day Challenge
                                  1 Reply Last reply
                                  • aikon2014 Offline
                                    aikon2014
                                    Posts: 164
                                    aikon2014 Offline
                                    aikon2014
                                    wrote on last edited by
                                    #52 Quote Reply

                                      @RF52 said:
                                      Do you use the "rough" side or the smooth side of the leather to strop?

                                      Sent fra min FRD-L09 via Tapatalk

                                      I use both, don't really think that it matters because as far as I know, it's small silicon particles in the leather that does the "sharpening", so it should be equal whatever side. But I know that others like to put compound on the suede rough side because it sticks easier and do the raw leather stropping on the flat smooth side.

                                      1 Reply Last reply
                                      • RF52 Offline
                                        RF52
                                        Posts: 5,787
                                        RF52 Offline
                                        RF52
                                        wrote on last edited by
                                        #53 Quote Reply

                                          @aikon2014 said:

                                          @RF52 said:

                                          Do you use the "rough" side or the smooth side of the leather to strop?

                                          Sent fra min FRD-L09 via Tapatalk

                                          I use both, don't really think that it matters because as far as I know, it's small silicon particles in the leather that does the "sharpening", so it should be equal whatever side. But I know that others like to put compound on the suede rough side because it sticks easier and do the raw leather stropping on the flat smooth side.

                                          Thanks [emoji2] I have an old belt I'm going to make into a strop, should be long enough for a couple so I can try both and see [emoji106]

                                          Sent fra min FRD-L09 via Tapatalk

                                          Merit Badges
                                          Zip Tie User Buck User Carabiner User Hook User Flashlight SOG Power Challenge Duct Tape Fire Making Outdoor Cook Hacker MTo Store User Mod User Axe User Mora User Fixed Blade Challenge Toothpick User Keychain Challenge Slasher User Traditional Folder Challenge 30 Day Axe Challenge PST 30 Day Challenge Off Brand MT Challenge Level 1 14th Anniversary Anything Goes Challenge Spyderco 30 Day Challenge The Nessmuk Challenge Camo SAK Skeletool 30 Day Challenge Poker Face Challenge LM Rebar Challenge Gas Station MRE challenge Soldier On 90 Day Challenge Folding Hunter 30 days Challenge Explorer 30 Day Challenge LM Squirt Challenge Level 2 Case XX 30 Day Challenge
                                          1 Reply Last reply
                                          • aikon2014 Offline
                                            aikon2014
                                            Posts: 164
                                            aikon2014 Offline
                                            aikon2014
                                            wrote on last edited by
                                            #54 Quote Reply

                                              @RF52 said:

                                              @aikon2014 said:

                                              @RF52 said:

                                              Do you use the "rough" side or the smooth side of the leather to strop?

                                              Sent fra min FRD-L09 via Tapatalk

                                              I use both, don't really think that it matters because as far as I know, it's small silicon particles in the leather that does the "sharpening", so it should be equal whatever side. But I know that others like to put compound on the suede rough side because it sticks easier and do the raw leather stropping on the flat smooth side.

                                              Thanks [emoji2] I have an old belt I'm going to make into a strop, should be long enough for a couple so I can try both and see [emoji106]

                                              Sent fra min FRD-L09 via Tapatalk

                                              I have an old belt I made into a couple of strops as well, works just as good as any other leather I tried!

                                              1 Reply Last reply
                                              • aikon2014 Offline
                                                aikon2014
                                                Posts: 164
                                                aikon2014 Offline
                                                aikon2014
                                                wrote on last edited by
                                                #55 Quote Reply

                                                  @RF52 said:

                                                  @aikon2014 said:

                                                  @RF52 said:

                                                  Do you use the "rough" side or the smooth side of the leather to strop?

                                                  Sent fra min FRD-L09 via Tapatalk

                                                  I use both, don't really think that it matters because as far as I know, it's small silicon particles in the leather that does the "sharpening", so it should be equal whatever side. But I know that others like to put compound on the suede rough side because it sticks easier and do the raw leather stropping on the flat smooth side.

                                                  Thanks [emoji2] I have an old belt I'm going to make into a strop, should be long enough for a couple so I can try both and see [emoji106]

                                                  Sent fra min FRD-L09 via Tapatalk

                                                  Btw, don't use that much pressure when stropping, the weight of the knife plus a tiny bit more, maybe 1.5-2X the weight of the knife is lagom!

                                                  1 Reply Last reply
                                                  • RF52 Offline
                                                    RF52
                                                    Posts: 5,787
                                                    RF52 Offline
                                                    RF52
                                                    wrote on last edited by
                                                    #56 Quote Reply

                                                      @aikon2014 said:

                                                      @RF52 said:

                                                      @aikon2014 said:

                                                      @RF52 said:

                                                      Do you use the "rough" side or the smooth side of the leather to strop?

                                                      Sent fra min FRD-L09 via Tapatalk

                                                      I use both, don't really think that it matters because as far as I know, it's small silicon particles in the leather that does the "sharpening", so it should be equal whatever side. But I know that others like to put compound on the suede rough side because it sticks easier and do the raw leather stropping on the flat smooth side.

                                                      Thanks [emoji2] I have an old belt I'm going to make into a strop, should be long enough for a couple so I can try both and see [emoji106]

                                                      Sent fra min FRD-L09 via Tapatalk

                                                      Btw, don't use that much pressure when stropping, the weight of the knife plus a tiny bit more, maybe 1.5-2X the weight of the knife is lagom!

                                                      Good to know [emoji106]

                                                      Sent fra min FRD-L09 via Tapatalk

                                                      Merit Badges
                                                      Zip Tie User Buck User Carabiner User Hook User Flashlight SOG Power Challenge Duct Tape Fire Making Outdoor Cook Hacker MTo Store User Mod User Axe User Mora User Fixed Blade Challenge Toothpick User Keychain Challenge Slasher User Traditional Folder Challenge 30 Day Axe Challenge PST 30 Day Challenge Off Brand MT Challenge Level 1 14th Anniversary Anything Goes Challenge Spyderco 30 Day Challenge The Nessmuk Challenge Camo SAK Skeletool 30 Day Challenge Poker Face Challenge LM Rebar Challenge Gas Station MRE challenge Soldier On 90 Day Challenge Folding Hunter 30 days Challenge Explorer 30 Day Challenge LM Squirt Challenge Level 2 Case XX 30 Day Challenge
                                                      1 Reply Last reply
                                                      • aikon2014 Offline
                                                        aikon2014
                                                        Posts: 164
                                                        aikon2014 Offline
                                                        aikon2014
                                                        wrote on last edited by
                                                        #57 Quote Reply

                                                          @RF52 said:

                                                          @aikon2014 said:

                                                          @RF52 said:

                                                          @aikon2014 said:

                                                          [quote author=RF52 link=topic=76485.msg1666735#msg1666735 date=1522262955]
                                                          Do you use the "rough" side or the smooth side of the leather to strop?

                                                          Sent fra min FRD-L09 via Tapatalk

                                                          I use both, don't really think that it matters because as far as I know, it's small silicon particles in the leather that does the "sharpening", so it should be equal whatever side. But I know that others like to put compound on the suede rough side because it sticks easier and do the raw leather stropping on the flat smooth side.

                                                          Thanks [emoji2] I have an old belt I'm going to make into a strop, should be long enough for a couple so I can try both and see [emoji106]

                                                          Sent fra min FRD-L09 via Tapatalk

                                                          Btw, don't use that much pressure when stropping, the weight of the knife plus a tiny bit more, maybe 1.5-2X the weight of the knife is lagom!

                                                          Good to know [emoji106]

                                                          Sent fra min FRD-L09 via Tapatalk
                                                          [/quote]

                                                          I don't know if I have to say it, but don't "cut" into the leather do it the other way, away strokes and use the same angle as when sharpening the knife, if you do 20 degrees each side when sharpening and putting the apex on the knife, use the same angle when stropping :)

                                                          1 Reply Last reply
                                                          • RF52 Offline
                                                            RF52
                                                            Posts: 5,787
                                                            RF52 Offline
                                                            RF52
                                                            wrote on last edited by
                                                            #58 Quote Reply

                                                              @aikon2014 said:

                                                              @RF52 said:

                                                              @aikon2014 said:

                                                              @RF52 said:

                                                              [quote author=aikon2014 link=topic=76485.msg1666737#msg1666737 date=1522263291]
                                                              [quote author=RF52 link=topic=76485.msg1666735#msg1666735 date=1522262955]
                                                              Do you use the "rough" side or the smooth side of the leather to strop?

                                                              Sent fra min FRD-L09 via Tapatalk

                                                              I use both, don't really think that it matters because as far as I know, it's small silicon particles in the leather that does the "sharpening", so it should be equal whatever side. But I know that others like to put compound on the suede rough side because it sticks easier and do the raw leather stropping on the flat smooth side.

                                                              Thanks [emoji2] I have an old belt I'm going to make into a strop, should be long enough for a couple so I can try both and see [emoji106]

                                                              Sent fra min FRD-L09 via Tapatalk

                                                              Btw, don't use that much pressure when stropping, the weight of the knife plus a tiny bit more, maybe 1.5-2X the weight of the knife is lagom!

                                                              Good to know [emoji106]

                                                              Sent fra min FRD-L09 via Tapatalk
                                                              [/quote]

                                                              I don't know if I have to say it, but don't "cut" into the leather do it the other way, away strokes and use the same angle as when sharpening the knife, if you do 20 degrees each side when sharpening and putting the apex on the knife, use the same angle when stropping :)
                                                              [/quote]I knew about not cutting the leather but good info about the angle, didn't think about that.

                                                              Sent fra min FRD-L09 via Tapatalk

                                                              Merit Badges
                                                              Zip Tie User Buck User Carabiner User Hook User Flashlight SOG Power Challenge Duct Tape Fire Making Outdoor Cook Hacker MTo Store User Mod User Axe User Mora User Fixed Blade Challenge Toothpick User Keychain Challenge Slasher User Traditional Folder Challenge 30 Day Axe Challenge PST 30 Day Challenge Off Brand MT Challenge Level 1 14th Anniversary Anything Goes Challenge Spyderco 30 Day Challenge The Nessmuk Challenge Camo SAK Skeletool 30 Day Challenge Poker Face Challenge LM Rebar Challenge Gas Station MRE challenge Soldier On 90 Day Challenge Folding Hunter 30 days Challenge Explorer 30 Day Challenge LM Squirt Challenge Level 2 Case XX 30 Day Challenge
                                                              1 Reply Last reply
                                                              • aikon2014 Offline
                                                                aikon2014
                                                                Posts: 164
                                                                aikon2014 Offline
                                                                aikon2014
                                                                wrote on last edited by
                                                                #59 Quote Reply

                                                                  @RF52 said:

                                                                  @aikon2014 said:

                                                                  @RF52 said:

                                                                  @aikon2014 said:

                                                                  [quote author=RF52 link=topic=76485.msg1666738#msg1666738 date=1522263423]
                                                                  [quote author=aikon2014 link=topic=76485.msg1666737#msg1666737 date=1522263291]
                                                                  [quote author=RF52 link=topic=76485.msg1666735#msg1666735 date=1522262955]
                                                                  Do you use the "rough" side or the smooth side of the leather to strop?

                                                                  Sent fra min FRD-L09 via Tapatalk

                                                                  I use both, don't really think that it matters because as far as I know, it's small silicon particles in the leather that does the "sharpening", so it should be equal whatever side. But I know that others like to put compound on the suede rough side because it sticks easier and do the raw leather stropping on the flat smooth side.

                                                                  Thanks [emoji2] I have an old belt I'm going to make into a strop, should be long enough for a couple so I can try both and see [emoji106]

                                                                  Sent fra min FRD-L09 via Tapatalk

                                                                  Btw, don't use that much pressure when stropping, the weight of the knife plus a tiny bit more, maybe 1.5-2X the weight of the knife is lagom!

                                                                  Good to know [emoji106]

                                                                  Sent fra min FRD-L09 via Tapatalk
                                                                  [/quote]

                                                                  I don't know if I have to say it, but don't "cut" into the leather do it the other way, away strokes and use the same angle as when sharpening the knife, if you do 20 degrees each side when sharpening and putting the apex on the knife, use the same angle when stropping :)
                                                                  [/quote]I knew about not cutting the leather but good info about the angle, didn't think about that.

                                                                  Sent fra min FRD-L09 via Tapatalk
                                                                  [/quote]

                                                                  And most of all, even with very little stropping you will usually notice a huge difference!

                                                                  1 Reply Last reply
                                                                  • RF52 Offline
                                                                    RF52
                                                                    Posts: 5,787
                                                                    RF52 Offline
                                                                    RF52
                                                                    wrote on last edited by
                                                                    #60 Quote Reply

                                                                      @aikon2014 said:

                                                                      @RF52 said:

                                                                      @aikon2014 said:

                                                                      @RF52 said:

                                                                      [quote author=aikon2014 link=topic=76485.msg1666741#msg1666741 date=1522263918]
                                                                      [quote author=RF52 link=topic=76485.msg1666738#msg1666738 date=1522263423]
                                                                      [quote author=aikon2014 link=topic=76485.msg1666737#msg1666737 date=1522263291]
                                                                      [quote author=RF52 link=topic=76485.msg1666735#msg1666735 date=1522262955]
                                                                      Do you use the "rough" side or the smooth side of the leather to strop?

                                                                      Sent fra min FRD-L09 via Tapatalk

                                                                      I use both, don't really think that it matters because as far as I know, it's small silicon particles in the leather that does the "sharpening", so it should be equal whatever side. But I know that others like to put compound on the suede rough side because it sticks easier and do the raw leather stropping on the flat smooth side.

                                                                      Thanks [emoji2] I have an old belt I'm going to make into a strop, should be long enough for a couple so I can try both and see [emoji106]

                                                                      Sent fra min FRD-L09 via Tapatalk

                                                                      Btw, don't use that much pressure when stropping, the weight of the knife plus a tiny bit more, maybe 1.5-2X the weight of the knife is lagom!

                                                                      Good to know [emoji106]

                                                                      Sent fra min FRD-L09 via Tapatalk
                                                                      [/quote]

                                                                      I don't know if I have to say it, but don't "cut" into the leather do it the other way, away strokes and use the same angle as when sharpening the knife, if you do 20 degrees each side when sharpening and putting the apex on the knife, use the same angle when stropping :)
                                                                      [/quote]I knew about not cutting the leather but good info about the angle, didn't think about that.

                                                                      Sent fra min FRD-L09 via Tapatalk
                                                                      [/quote]

                                                                      And most of all, even with very little stropping you will usually notice a huge difference!
                                                                      [/quote]Great!

                                                                      Sent fra min FRD-L09 via Tapatalk

                                                                      Merit Badges
                                                                      Zip Tie User Buck User Carabiner User Hook User Flashlight SOG Power Challenge Duct Tape Fire Making Outdoor Cook Hacker MTo Store User Mod User Axe User Mora User Fixed Blade Challenge Toothpick User Keychain Challenge Slasher User Traditional Folder Challenge 30 Day Axe Challenge PST 30 Day Challenge Off Brand MT Challenge Level 1 14th Anniversary Anything Goes Challenge Spyderco 30 Day Challenge The Nessmuk Challenge Camo SAK Skeletool 30 Day Challenge Poker Face Challenge LM Rebar Challenge Gas Station MRE challenge Soldier On 90 Day Challenge Folding Hunter 30 days Challenge Explorer 30 Day Challenge LM Squirt Challenge Level 2 Case XX 30 Day Challenge
                                                                      1 Reply Last reply
                                                                      • Gerhard Gerber Offline
                                                                        Gerhard Gerber
                                                                        Posts: 3,832
                                                                        Gerhard Gerber Offline
                                                                        Gerhard Gerber
                                                                        wrote on last edited by
                                                                        #61 Quote Reply

                                                                          It blows peoples' minds if they see how a strop puts back a paper slicing edge with a few passes......the trick is to not let the edge get away from you.

                                                                          This is true for all the older simpler steels.......

                                                                          1 Reply Last reply
                                                                          • Aloha Offline
                                                                            Aloha
                                                                            Global Moderators
                                                                            Posts: 31,235
                                                                            Aloha Offline
                                                                            Aloha
                                                                            Global Moderators
                                                                            wrote on last edited by
                                                                            #62 Quote Reply

                                                                              I've been looking at my edge bevels thru my mag glass more and more. I don't like the lines that I see from factory. I like to strop to the finest smoothest finish I can. Even under the magnification of my mag glass I can see the "toothy" edge which I just don't like. I used to round over my apex when I first began stropping. I wasn't "getting it" till I watched a few videos. I'm currently working on my Skeletool CX blade. It has lines on the bevel which I am currently removing by stropping. Some may not want to or feel they need to do this and thats fine but I enjoy the process more than anything. Secondly, my high carbon blades benefit much like the highly polished SAK blades do in keeping rusting to a bare minimum if at all. Lastly, I do enjoy the level of sharpness I am able to achieve. Its quite rewarding.

                                                                              Merit Badges
                                                                              One Piece Collector Japanese PST Juice Collector Level 1 Reviewer Camping Fire Making Flashlight Outdoor Cook BO Tools Level 3 Santa Traditional Folder Challenge Pen Challenge
                                                                              1 Reply Last reply

                                                                              Hello! It looks like you're interested in this conversation, but you don't have an account yet.

                                                                              Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.

                                                                              With your input, this post could be even better 💗

                                                                              Register Login

                                                                              • 1
                                                                              • 2
                                                                              • 3
                                                                              • 4
                                                                              1. Home
                                                                              2. Tool Talk
                                                                              3. Edged Tools
                                                                              4. Sharpening help.
                                                                              Reply
                                                                              • Reply as topic
                                                                              Log in to reply
                                                                              COMMUNITY LINKS
                                                                              EDC-TV SAKWiki GearFeed SAKSelector
                                                                              Operational Funds

                                                                              Help us keep the Unworkable working!

                                                                              Make A Donation
                                                                              November Goal: $300.00
                                                                              Due Date: Nov 30
                                                                              Total Receipts: $0.00
                                                                              Below Goal: $300.00
                                                                              0% funded
                                                                              • Login

                                                                              • Don't have an account? Register

                                                                              • Login or register to search.
                                                                              • First post
                                                                                Last post
                                                                              0