Skip to content
Collapse
? [[global:guest]]
Unread Recent
HOME SEARCH PROFILE MESSAGES 0 BOOKMARKS MEMBERS BADGES
Multitool.Org Forum
MultiTool.org • Community Header Space • Watch This Space

Lynn's First SAK Mod Build

Scheduled Pinned Locked Moved The Mod Squad
80 Posts 1 Posters 6.9k Views
  1. Home
  2. The Mod Squad
  3. Lynn's First SAK Mod Build
Lynn's First SAK Mod Build
  • Oldest to Newest
  • Newest to Oldest
  • Most Votes
Reply
  • Reply as topic
Log in to reply
This topic has been deleted. Only users with topic management privileges can see it.
  • Lynn LeFey Offline
    Lynn LeFey
    Posts: 7,918
    Lynn LeFey Offline
    Lynn LeFey
    wrote on last edited by Lynn LeFey
    Quote Reply

      Okay.

      So...

      I have bushings I got months ago from Syph. I have pin stock from 50ft-trad. I have three donor 91mm SAKs.

      Now I just need some guts. And a drill. And a couple metal punches. And a hammer, and workbench, and...

      Anyway. I've popped the scales from the donors, and drilled out the pins so far. All the bushings on the sides I drilled out are ruined, which I expected. 50ft-trad recommended I wrap the knives in tape before removing the pins to keep parts from flying, so I did.

      The pins are still in them, but not held in by bushings. I'll tear them apart tomorrow.

      <a href="https://flic.kr/p/24tMkoU" target="_blank" rel="noopener noreferrer"><img src="https://farm1.staticflickr.com/799/40352153524_a0af83e40b_z.jpg" alt="banner" style="max-width: 100%; height: auto;" /></a>

      The donors are the 1970ish Huntman, the early-mid 70's Motorist special, and a newer huntsman for the blade layer (which was trashed on the other two). Not gonna lie, I'm more than a little intimidated on this. I already broke a drill bit and dented one of the aluminum spacers. (sigh) This could turn out really bad. Or... great. It COULD turn out GREAT! :D

      Merit Badges
      Flashlight Reviewer Outdoor Cook EDCSource Buyer Hook User Off Brand MT Challenge Level 3
      1 Reply Last reply
      • El Corkscrew Offline
        El Corkscrew
        Posts: 8,191
        El Corkscrew Offline
        El Corkscrew
        wrote on last edited by
        #1 Quote Reply

          :popcorn:

          “All you need in this life is ignorance and confidence, and then success is sure.” - Mark Twain

          Merit Badges
          Scale Changer Minimal SAK Challenge Hook User EDC Pocket Dump Challenge Birth Year SAK ALOX Colors Level 2 Ignore Discontinued SAK/MT Challenge Stayglow SAK Mod User ALOX with Scissors MTO Tool MTo Store User 30 Days and 30 SAKs The Pioneer X Challenge Santa Camper 30 day Challenge Chuck Yeager Challenge
          1 Reply Last reply
          • Toppskarven . Offline
            Toppskarven .
            Posts: 41
            Toppskarven . Offline
            Toppskarven .
            wrote on last edited by Toppskarven .
            #2 Quote Reply

              :popcorn: x2 What will the end result be?

              Posted using my electronic SAK scales

              The Swiss:
              -Live in Mountains.
              -Collect Gold.
              -Make intricate machinery and weapons.
              -Aren't concerned with the wars of men.

              DWARVES! THE SWISS ARE DWARVES!

              1 Reply Last reply
              • Don Pablo Offline
                Don Pablo
                Posts: 15,329
                Don Pablo Offline
                Don Pablo
                wrote on last edited by
                #3 Quote Reply

                  :popcorn: x3.
                  :tu:

                  Hooked, like everyone else. ;)

                  All hail the hook!

                  Merit Badges
                  Pen Challenge Modified SAK Challenge MTo Anniversary Challenge 14th Anniversary Anything Goes Challenge 30 Day Bladeless Challenge
                  1 Reply Last reply
                  • zoidberg Online
                    zoidberg
                    Posts: 38,161
                    zoidberg Online
                    zoidberg
                    wrote on last edited by
                    #4 Quote Reply

                      You'll be all right Lynn.
                      In no time you'll be recognizing the springs and what not.
                      Also I think you need to keep the stamped liners with the thinner blade if you're mixing the gens.

                      1 Reply Last reply
                      • magentus Offline
                        magentus
                        Admin Team
                        Posts: 21,659
                        magentus Offline
                        magentus
                        Admin Team
                        wrote on last edited by
                        #5 Quote Reply

                          Good job Lynn. 70% of modding is the courage to start it in the first place and there's a definite learning curve.

                          Can't wait to see the end result :cheers:

                          'Use the force Harry' - Gandalf

                          Merit Badges
                          Hacker Hook User Duct Tape Hobo User Minimal SAK Challenge Ignore SAKMC Santa
                          1 Reply Last reply
                          • Wspeed Offline
                            Wspeed
                            Posts: 76,225
                            Wspeed Offline
                            Wspeed
                            wrote on last edited by
                            #6 Quote Reply

                              Look forward on your progress with modding :popcorn:

                              fail to prepare prepare to fail

                              Merit Badges
                              Hacker Mod User Zip Tie User EDC Pocket Dump Challenge SAKMC MTO Tool MTo Store User Flashlight OCD Squad Time Lord Level 1 Axe User SOG Power Challenge Duct Tape Scaler User Carabiner User Hook User Fire Making Airgun User LM Wave Challenge Jack'O Lantern Badge Camo SAK Buck User Paracord SAK STACK Challenge 30 Days Calendar 2019 Toothpick User LM Surge Challenge Level 3 The SUPER Challenge Traditional Folder Challenge MTo Anniversary Challenge LM Crunch 30 day Challenge Calendar 2020 14th Anniversary Anything Goes Challenge Def's 50k Challenge
                              1 Reply Last reply
                              • Lynn LeFey Offline
                                Lynn LeFey
                                Posts: 7,918
                                Lynn LeFey Offline
                                Lynn LeFey
                                wrote on last edited by Lynn LeFey
                                #7 Quote Reply

                                  Thanks all.

                                  I THINK the end result is going to be a Master Craftsman.

                                  Not anything terribly exciting from this morning's work. I tore down the two Huntsmans.

                                  The older one...
                                  <a href="https://flic.kr/p/24v9zzm" target="_blank" rel="noopener noreferrer"><img src="https://farm1.staticflickr.com/819/40367615074_27c2a6f4ac_z.jpg" alt="banner" style="max-width: 100%; height: auto;" /></a>

                                  The newer one...
                                  <a href="https://flic.kr/p/24v9zuG" target="_blank" rel="noopener noreferrer"><img src="https://farm1.staticflickr.com/818/40367614804_da7f96efbe_z.jpg" alt="banner" style="max-width: 100%; height: auto;" /></a>

                                  Four of the 5 liners on the older Huntsman are broken. Not only broken, but extraordinarily brittle. I broke one while taking the tool apart. I don't know what the deal is. However, the stainless steel parts seem mostly in good (not corroded) condition.

                                  The donor Huntsman, the newer one, is in good shape.

                                  I still have to take the Automobile Special apart. I found out this morning that I hadn't drilled out one of the pins sufficiently. It's the small one with no bushings.

                                  I have a set of hardened steel punches I got to do some work on firearms, and those helped immensely. I took the tools out into the garage, and used a center punch to put a starting guide mark on the pins. For the most part, this kept the drill bit in place while i drilled the pins out. When I messed up, either from putting the mark on the pin off center, or the bit wandering, things rapidly got nasty. I'm kind of surprised I didn't screw up worse than I did. Once the pins were drilled out, I used another punch to drive them out, slightly. Enough to be sure they'd move. BUT... I forgot to check one, and have to go back out in the garage, when I get a moment.

                                  After I've gotten these things apart, there is going to be a LOT of part cleaning/polishing to do before assembly, so this isn't getting completed today.

                                  I have an idea for peening, and want to throw it out there to see if it sounds reasonable. What i think I'm going to do on the first peens is the clamp the pin stock between two pieces of wood, then put an old spacer (probably one already broken) on top of the wood, then an old bushing. Then, peen the head into shape, and file flat. The wood 'should' hold the pin from slipping down. The old spacer is just there to support the bushing, and the bushing acts as the form into which the head is peened. If I break the bushing, meh. Get another used one. This should end with a pin head that is peened to the shape of the concave portion of the bushing. If anyone sees anything ludicrously wrong with this, please let me know. I'm really kind of winging it here. The pin in the pic below is not shown actually against the bushing, which is where it would be when shaping. Imagine this is after forming, and the pin has been raised.

                                  <a href="https://flic.kr/p/24vbgzE" target="_blank" rel="noopener noreferrer"><img src="https://farm1.staticflickr.com/798/40367944764_0b0302fae3_z.jpg" alt="banner" style="max-width: 100%; height: auto;" /></a>

                                  Merit Badges
                                  Flashlight Reviewer Outdoor Cook EDCSource Buyer Hook User Off Brand MT Challenge Level 3
                                  1 Reply Last reply
                                  • Don Pablo Offline
                                    Don Pablo
                                    Posts: 15,329
                                    Don Pablo Offline
                                    Don Pablo
                                    wrote on last edited by
                                    #8 Quote Reply

                                      Interesting idea... go for it and see what happens! :D
                                      The suggested method is to put the SAK together with the unpeened pins, THEN file down to size and peen, so that the head sits nicely in the brushing.
                                      Why not try both ways?
                                      Here’s an informative quote about assembling and peening from tattoosteve:

                                      @tattoosteve99 said:
                                      I’ll interject some wisdom. The pins are surely bent. You need some sort of jig for assembly. If you can’t make one use a stack of liners taped together. The pins need to be longer than the finished knife.
                                      The springs are also slightly wider than the tools so they will work.
                                      Here’s my advice.
                                      Hard to explain but I’ll try.
                                      Put pins in jig first.
                                      Outer liner first, then the tool spring, followed by the tools but don’t force them in just yet. Do the non corkscrew or backside philips layer last not this layer. One side of the tools will go in and one side won’t. That’s what you need in order for this to work.
                                      Add a liner and push it down tight as you can. Then use and small pin punch and load the other tool. This will support the pins as you assemble.
                                      After all is together all the tools should still be in the open position. Hold it tight or tape the knife up so it don’t blow apart, not fun if it does.
                                      Then pin the outer pins first, then one with the tools. Don’t hammer them closed just yet, just enough to hold the knife together for now
                                      Next donthe center pivot pin. Then the backside tool pin. This should hold the knife together. Now you can check to see if the tools work correctly and that the pins aren’t bent. Don’t let them snap shut as they can damage the liners
                                      After that’s done and everything looks good. Start pinning it tools side first. They should be very slightly loose. That’s normal. Then do the backside tool pin.
                                      After that the middle pin. This is the tricky one. It’s only purpose is to help support the springs. It should be tight enough to barley spin. Then check snap on each tool separately one at a time. They should all fall correctly in place.
                                      That should correct any issues you have. Hope this all makes sense and is helpful.

                                      Sent from my iPhone using Tapatalk

                                      Hooked, like everyone else. ;)

                                      All hail the hook!

                                      Merit Badges
                                      Pen Challenge Modified SAK Challenge MTo Anniversary Challenge 14th Anniversary Anything Goes Challenge 30 Day Bladeless Challenge
                                      1 Reply Last reply
                                      • cody6268 Offline
                                        cody6268
                                        Posts: 6,250
                                        cody6268 Offline
                                        cody6268
                                        wrote on last edited by
                                        #9 Quote Reply

                                          What's with the liners on those older SAKs? It seems to be a major issue with SAKs from the '50s and '60s. I had a late 1950s Ranger which all of them were cracked. After about two weeks carry, I noticed a further crack had developed on the back liner closer to the corkscrew pivot.

                                          Merit Badges
                                          Hook User Scaler User Discontinued SAK/MT Challenge Axe User Zip Tie User The Huntsman Challenge Traditional Folder Challenge Flashlight Off Brand MT Challenge Level 3 LM Surge Challenge Level 3 The SUPER Challenge Buck 110 Challenge Buck 112 Ranger 30 Day Challenge Fieldmaster 30 Day Challenge SAK STACK Challenge 30 Days Soldier 30 Day Challenge Titanium Spyderco 30 Day Challenge The Nessmuk Challenge Folding Hunter 30 days Challenge Daredevil challenge SAK-alike Challenge Chainsaw User Utility Knife  30 Day Challenge Buck 30 Day Challenge
                                          1 Reply Last reply
                                          • Don Pablo Offline
                                            Don Pablo
                                            Posts: 15,329
                                            Don Pablo Offline
                                            Don Pablo
                                            wrote on last edited by
                                            #10 Quote Reply

                                              It’s either what happens to the aluminium in old liners when not taken care of, or bad aluminium? :think:

                                              Hooked, like everyone else. ;)

                                              All hail the hook!

                                              Merit Badges
                                              Pen Challenge Modified SAK Challenge MTo Anniversary Challenge 14th Anniversary Anything Goes Challenge 30 Day Bladeless Challenge
                                              1 Reply Last reply
                                              • Lynn LeFey Offline
                                                Lynn LeFey
                                                Posts: 7,918
                                                Lynn LeFey Offline
                                                Lynn LeFey
                                                wrote on last edited by
                                                #11 Quote Reply

                                                  I think in the case of mine, it was certainly that the knife had spent some (probably fairly long) amount of time in water.

                                                  I think that ate the Aluminum due to Galvanic Corrosion (sometimes called 'electrolysis', incorrectly)
                                                  This happens when two different metals touch each other under water that is an electrolyte, like salt water, but will even happen (more slowly) in brackish and fresh water.

                                                  Here's the kicker. If you want to prevent corrosion on metals around brackish water, Aluminum is your best material to make an Anode out of. The Anode is a piece of sacrificial metal used to take the corrosion, to prevent it on another metal object.

                                                  I remember watching a show, maybe an episode of 'Dirty Jobs', where the folks had to crawl down into the steel pylon of a bridge or pier and replace all the zinc anodes. Somewhere in the back of my brain, it got stored that mixing metals in an underwater environment was a 'bad thing', at least for one of those metals. And when pulling the knife apart, I wouldn't have thought about it, except the aluminum was BRITTLE, which I found very very strange.

                                                  My six seconds of exhaustive research came up with this...
                                                  https://www.westmarine.com/WestAdvisor/Preventing-Galvanic-Corrosion

                                                  Oh... and it wouldn't help to replace the aluminum liners with brass, because then the stainless steel would be less noble than the brass, and the corrosion would most likely affect the stainless steel. So... :think:

                                                  Some of this is my speculation as to what happened to my knife, but I think I'm on the right track.

                                                  Merit Badges
                                                  Flashlight Reviewer Outdoor Cook EDCSource Buyer Hook User Off Brand MT Challenge Level 3
                                                  1 Reply Last reply
                                                  • Sparky415 Offline
                                                    Sparky415
                                                    Posts: 13,000
                                                    Sparky415 Offline
                                                    Sparky415
                                                    wrote on last edited by
                                                    #12 Quote Reply

                                                      Hi Lynn,
                                                      I have found it usefull when peening to put little 'shims' between one of the layers
                                                      This gives you a little room to play with without over tightening
                                                      You can use bits of tin can for shims :salute:

                                                      But the clever SAK modders on here might have better advice :cheers:

                                                      :popcorn:

                                                      Everything’s adjustable

                                                      1 Reply Last reply
                                                      • Poncho65 Offline
                                                        Poncho65
                                                        Global Moderators
                                                        Posts: 87,638
                                                        Poncho65 Offline
                                                        Poncho65
                                                        Global Moderators
                                                        wrote on last edited by
                                                        #13 Quote Reply

                                                          Great read so far :tu: Can't wait to see what you get done next :like: Good luck and try not to feel overwhelmed as it really isn't that overly complicated of a task :salute: Once you get going it is a lot easier than one would first think :cheers:

                                                          Merit Badges
                                                          BO Tools Level 2 Japanese PST Reviewer Photographer Axe User Fire Making Hacker Multitool Encyclopedia User OCD Squad Time Lord Level 1 Mod User Duct Tape Discontinued SAK/MT Challenge The SUPER Challenge EDC Pocket Dump Challenge Def's 50k Challenge LM Rebar Challenge Traditional Folder Challenge Gerber MP Challenge Modified SAK Challenge MTo Anniversary Challenge Victorinox SwissTool Challenge LM Surge Challenge Level 2 Victorinox Spirit Challenge MTO Rotation Challenge LM Wave Challenge Calendar   2017 Calendar  2018 Calendar 2019 LM Surge Challenge Level 3 Keychain Challenge LM Crunch 15 day Challenge LM OHT Challenge PST 30 Day Challenge Calendar 2020 14th Anniversary Anything Goes Challenge Skeletool 30 Day Challenge The Batman 30 Day Challenge Poker Face Challenge Daredevil challenge The 30 Day MiniTool Challenge 30 Day Locks Up Challenge One Piece Collector 30 Day Rhymes with Orange Challenge Bond 30 Day Challenge Wally Badge 30 Day Ratchet Challenge
                                                          1 Reply Last reply
                                                          • Lynn LeFey Offline
                                                            Lynn LeFey
                                                            Posts: 7,918
                                                            Lynn LeFey Offline
                                                            Lynn LeFey
                                                            wrote on last edited by
                                                            #14 Quote Reply

                                                              So, a bit more progress...

                                                              First, what will probably come as a shock to no one, I ended up cutting myself on the sharp end of a cut pin...

                                                              <a href="https://flic.kr/p/FWn4pp" target="_blank" rel="noopener noreferrer"><img src="https://farm1.staticflickr.com/877/26213113537_2677c43e99_z.jpg" alt="banner" style="max-width: 100%; height: auto;" /></a>

                                                              While taking the Automobile Special apart. Here it is, though, the last of the three knives to come apart for the build.
                                                              <a href="https://flic.kr/p/22QCQ4J" target="_blank" rel="noopener noreferrer"><img src="https://farm1.staticflickr.com/878/39275426840_125a70302d_z.jpg" alt="banner" style="max-width: 100%; height: auto;" /></a>

                                                              And the new bushings and pins just waiting for me to clean parts up and assemble...
                                                              <a href="https://flic.kr/p/FWn4dx" target="_blank" rel="noopener noreferrer"><img src="https://farm1.staticflickr.com/889/26213112907_9280f1e545_z.jpg" alt="banner" style="max-width: 100%; height: auto;" /></a>

                                                              Thanks again to Syph007 for the bushings, and 50ft-trad for the pin stock. :salute:

                                                              Merit Badges
                                                              Flashlight Reviewer Outdoor Cook EDCSource Buyer Hook User Off Brand MT Challenge Level 3
                                                              1 Reply Last reply
                                                              • Vidar Offline
                                                                Vidar
                                                                Posts: 2,605
                                                                Vidar Offline
                                                                Vidar
                                                                wrote on last edited by Vidar
                                                                #15 Quote Reply

                                                                  This is interesting to follow. :tu:

                                                                  @Lynn LeFey said:
                                                                  Oh... and it wouldn't help to replace the aluminum liners with brass, because then the stainless steel would be less noble than the brass, and the corrosion would most likely affect the stainless steel. So... :think:

                                                                  Brass contains significant amounts of zinc, so chances are that the zinc in the brass would be eaten away first. Hence the general rule to avoid using brass submerged in seawater. (As opposed to some bronzes which are very good for just that).

                                                                  With galvanic corrosion the relative surface sizes of the metals matter a lot too in practical terms. So you can for instance use stainless steel nuts and bolts to hold together aluminium constructions, but the other way around would be bad.

                                                                  "Simple is hard"
                                                                  "Hard is hard too"
                                                                  (Partial disclosure: I design tools for a living).

                                                                  Merit Badges
                                                                  MTo Anniversary Challenge
                                                                  1 Reply Last reply
                                                                  • hiraethus Offline
                                                                    hiraethus
                                                                    Admin Team
                                                                    Posts: 6,969
                                                                    hiraethus Offline
                                                                    hiraethus
                                                                    Admin Team
                                                                    wrote on last edited by
                                                                    #16 Quote Reply

                                                                      @Sparky415 said:
                                                                      But the clever SAK modders on here might have better advice :cheers:

                                                                      Dunno about clever, but my advice would be to go slowly with a light touch and check often. I've never felt that shims are necessary.

                                                                      Merit Badges
                                                                      Birth Year SAK Mod User Hacker Camping ALOX with Scissors Duct Tape BO Tools Level 1 SAKWiki User ALOX Colors Level 1 Flashlight Traditional Folder Challenge Titanium Santa
                                                                      1 Reply Last reply
                                                                      • hiraethus Offline
                                                                        hiraethus
                                                                        Admin Team
                                                                        Posts: 6,969
                                                                        hiraethus Offline
                                                                        hiraethus
                                                                        Admin Team
                                                                        wrote on last edited by
                                                                        #17 Quote Reply

                                                                          @Vidar said:
                                                                          This is interesting to follow. :tu:

                                                                          @Lynn LeFey said:

                                                                          Oh... and it wouldn't help to replace the aluminum liners with brass, because then the stainless steel would be less noble than the brass, and the corrosion would most likely affect the stainless steel. So... :think:

                                                                          Brass contains significant amounts of zinc, so chances are that the zinc in the brass would be eaten away first. Hence the general rule to avoid using brass submerged in seawater. (As opposed to some bronzes which are very good for just that).

                                                                          With galvanic corrosion the relative surface sizes of the metals matter a lot too in practical terms. So you can for instance use stainless steel nuts and bolts to hold together aluminium constructions, but the other way around would be bad.

                                                                          According to https://en.wikipedia.org/wiki/Galvanic_corrosion#Galvanic_series, brass has a lower anodic index than aluminium so the aluminium will corrode more/faster. I believe that the liners on older knives were not anodised, which would mean they're more susceptible to corrosion too. There may also be differences in the composition of the alloy.

                                                                          Merit Badges
                                                                          Birth Year SAK Mod User Hacker Camping ALOX with Scissors Duct Tape BO Tools Level 1 SAKWiki User ALOX Colors Level 1 Flashlight Traditional Folder Challenge Titanium Santa
                                                                          1 Reply Last reply
                                                                          • hiraethus Offline
                                                                            hiraethus
                                                                            Admin Team
                                                                            Posts: 6,969
                                                                            hiraethus Offline
                                                                            hiraethus
                                                                            Admin Team
                                                                            wrote on last edited by
                                                                            #18 Quote Reply

                                                                              @Lynn LeFey said:
                                                                              I have an idea for peening, and want to throw it out there to see if it sounds reasonable. What i think I'm going to do on the first peens is the clamp the pin stock between two pieces of wood, then put an old spacer (probably one already broken) on top of the wood, then an old bushing. Then, peen the head into shape, and file flat. The wood 'should' hold the pin from slipping down. The old spacer is just there to support the bushing, and the bushing acts as the form into which the head is peened. If I break the bushing, meh. Get another used one. This should end with a pin head that is peened to the shape of the concave portion of the bushing. If anyone sees anything ludicrously wrong with this, please let me know. I'm really kind of winging it here. The pin in the pic below is not shown actually against the bushing, which is where it would be when shaping. Imagine this is after forming, and the pin has been raised.

                                                                              <a href="https://flic.kr/p/24vbgzE" target="_blank" rel="noopener noreferrer"><img src="https://farm1.staticflickr.com/798/40367944764_0b0302fae3_z.jpg" alt="banner" style="max-width: 100%; height: auto;" /></a>

                                                                              Just peen the pins into the bushes on the assembled knife. Build the knife onto over-length pins, then when it's fully assembled, position the bushes over the pins. You can use a spare liner to keep the bits in position while you work. Trim the pins with snips/pliers, then file flat leaving yourself 1-1.5mm of exposed pin on each side above the top surface of the bushing. Hammer away from there.

                                                                              Merit Badges
                                                                              Birth Year SAK Mod User Hacker Camping ALOX with Scissors Duct Tape BO Tools Level 1 SAKWiki User ALOX Colors Level 1 Flashlight Traditional Folder Challenge Titanium Santa
                                                                              1 Reply Last reply
                                                                              • Vidar Offline
                                                                                Vidar
                                                                                Posts: 2,605
                                                                                Vidar Offline
                                                                                Vidar
                                                                                wrote on last edited by
                                                                                #19 Quote Reply

                                                                                  @hiraethus said:
                                                                                  According to https://en.wikipedia.org/wiki/Galvanic_corrosion#Galvanic_series, brass has a lower anodic index than aluminium so the aluminium will corrode more/faster. I believe that the liners on older knives were not anodised, which would mean they're more susceptible to corrosion too. There may also be differences in the composition of the alloy.

                                                                                  The question then is what brass? There are so many alloys called brass. What they have in common is that they contain copper and zinc. And zinc is the most common material for sacrificial anode use. (Just think of everything that is galvanized).

                                                                                  Brass is suspectible to dezincification where the zinc is selectively eaten away. There are differences between brasses - some additives help reduce the issue, and brasses with little zinc also have less issues. But unless one knows the exact brass alloy used, and the environment it will be used in, it might be safer to just use some better alternative.

                                                                                  Not many will store their SAKs in salt water anyway :)

                                                                                  "Simple is hard"
                                                                                  "Hard is hard too"
                                                                                  (Partial disclosure: I design tools for a living).

                                                                                  Merit Badges
                                                                                  MTo Anniversary Challenge
                                                                                  1 Reply Last reply

                                                                                  Hello! It looks like you're interested in this conversation, but you don't have an account yet.

                                                                                  Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.

                                                                                  With your input, this post could be even better 💗

                                                                                  Register Login

                                                                                  1. Home
                                                                                  2. The Mod Squad
                                                                                  3. Lynn's First SAK Mod Build
                                                                                  Reply
                                                                                  • Reply as topic
                                                                                  Log in to reply
                                                                                  COMMUNITY LINKS
                                                                                  EDC-TV SAKWiki GearFeed SAKSelector
                                                                                  Operational Funds

                                                                                  Help us keep the Unworkable working!

                                                                                  Make A Donation
                                                                                  November Goal: $300.00
                                                                                  Due Date: Nov 30
                                                                                  Total Receipts: $0.00
                                                                                  Below Goal: $300.00
                                                                                  0% funded
                                                                                  • Login

                                                                                  • Don't have an account? Register

                                                                                  • Login or register to search.
                                                                                  • First post
                                                                                    Last post
                                                                                  0