Handyman Challenge
-
@RF52 said:
#12 Opening some boxes and bags today at work, like this box of new brakepads

Sent fra min FRD-L09 via Tapatalk

Just recently did complete brake job on all four wheels of my car, replacing everything: rotors, pads, calipers and caliper brackets. Opened a couple of boxes of the parts with the SAK, and used it to fiddle with the pressure bleeder to get it working a little better, but alas, I needed some much bigger tools for the complete job. ;)
Your photo reminded me of how much a PITA bleeding out a modern ABS module can be without the magic electronic box (that costs hundreds of $$$) to set all the tiny pistons in the ABS module to TDC. There's a workaround but it's time consuming and uses more brake fluid.
Hope the brake job went well!
John
-
#12 Opening some boxes and bags today at work, like this box of new brakepads


Sent fra min FRD-L09 via Tapatalk

Just recently did complete brake job on all four wheels of my car, replacing everything: rotors, pads, calipers and caliper brackets. Opened a couple of boxes of the parts with the SAK, and used it to fiddle with the pressure bleeder to get it working a little better, but alas, I needed some much bigger tools for the complete job. ;)
Your photo reminded me of how much a PITA bleeding out a modern ABS module can be without the magic electronic box (that costs hundreds of $$$) to set all the tiny pistons in the ABS module to TDC. There's a workaround but it's time consuming and uses more brake fluid.
Hope the brake job went well!
John
Since I'm a bus mechanic it's supposed to be air in the brake system [emoji106] But I know what you mean, bleeding brakes is always sketchy and usually ends up with having to buy som bits and pieces [emoji12]
Sent fra min FRD-L09 via Tapatalk
-
#12 Opening some boxes and bags today at work, like this box of new brakepads


Sent fra min FRD-L09 via Tapatalk

Just recently did complete brake job on all four wheels of my car, replacing everything: rotors, pads, calipers and caliper brackets. Opened a couple of boxes of the parts with the SAK, and used it to fiddle with the pressure bleeder to get it working a little better, but alas, I needed some much bigger tools for the complete job. ;)
Your photo reminded me of how much a PITA bleeding out a modern ABS module can be without the magic electronic box (that costs hundreds of $$$) to set all the tiny pistons in the ABS module to TDC. There's a workaround but it's time consuming and uses more brake fluid.
Hope the brake job went well!
John
Since I'm a bus mechanic it's supposed to be air in the brake system
But I know what you mean, bleeding brakes is always sketchy and usually ends up with having to buy som bits and pieces 
Sent fra min FRD-L09 via Tapatalk
Those did look like some rather large pads. Thought it might be camera angle and perspective, but obviously not!
John
-
#12 Opening some boxes and bags today at work, like this box of new brakepads


Sent fra min FRD-L09 via Tapatalk

Just recently did complete brake job on all four wheels of my car, replacing everything: rotors, pads, calipers and caliper brackets. Opened a couple of boxes of the parts with the SAK, and used it to fiddle with the pressure bleeder to get it working a little better, but alas, I needed some much bigger tools for the complete job. ;)
Your photo reminded me of how much a PITA bleeding out a modern ABS module can be without the magic electronic box (that costs hundreds of $$$) to set all the tiny pistons in the ABS module to TDC. There's a workaround but it's time consuming and uses more brake fluid.
Hope the brake job went well!
John
Since I'm a bus mechanic it's supposed to be air in the brake system
But I know what you mean, bleeding brakes is always sketchy and usually ends up with having to buy som bits and pieces 
Sent fra min FRD-L09 via Tapatalk
Those did look like some rather large pads. Thought it might be camera angle and perspective, but obviously not!
John
No, they are kind of big atleast compared to brakepads on a car [emoji106] But compared to a locomotive they aren't that big again [emoji12]
Sent fra min FRD-L09 via Tapatalk
-
#13 The knife saw some use today, cutting a hose and a firewarning sticker so I could change it.


Sent fra min FRD-L09 via Tapatalk
-
#13 The knife saw some use today, cutting a hose and a firewarning sticker so I could change it.


Sent fra min FRD-L09 via Tapatalk
thin slicey blade, the hose didn't stand a chance

I was a bit surprised how easy it cut through the hose, it did a very good job on that [emoji106]
Sent fra min FRD-L09 via Tapatalk
-
#14 Nothing much today so a pic from a walk in the woods with the dog

Sent fra min FRD-L09 via Tapatalk
-
#15 No use today, just a couple of pics to show the spring [emoji16]


Sent fra min FRD-L09 via Tapatalk
-
#13 The knife saw some use today, cutting a hose and a firewarning sticker so I could change it.


Sent fra min FRD-L09 via Tapatalk
thin slicey blade, the hose didn't stand a chance

I was a bit surprised how easy it cut through the hose, it did a very good job on that

Sent fra min FRD-L09 via Tapatalk
I discovered that myself with reinforced hose! It is a bit amazing what a truly sharp blade will do.
John
-
#13 The knife saw some use today, cutting a hose and a firewarning sticker so I could change it.


Sent fra min FRD-L09 via Tapatalk
thin slicey blade, the hose didn't stand a chance

I was a bit surprised how easy it cut through the hose, it did a very good job on that

Sent fra min FRD-L09 via Tapatalk
I discovered that myself with reinforced hose! It is a bit amazing what a truly sharp blade will do.
John
Yes it's a great little knife [emoji106]
Sent fra min FRD-L09 via Tapatalk
-
The large blade is very adept in cutting hoses. I've cut gas hoses and garden hoses, all without effort.
Day 13
Friday the 13th! Will the Handyman give out? Will one of the springs break? Will I loose my microscrewdriver? Or a toothpick perhaps?
Nope, everything went fine. Not much use during the day but at night the Handyman was used with cooking. Cutting open packages of the sauerkraut and sausage.
Handyman, sauerkraut and sausageDay 14
Ah, weekend. A perfect morning for soft boiled eggs! Unfortunately, Friday the 13th rubbed off on my Saturday the 14th.
The eggs came in some sort of paperfoam. We don't have eggcups so I cut a piece off of the box. The short blade cut through it like butter.
Seemed like a pretty good idea.
When I put the eggs in it tumbled over and the foam melted on the eggs. So I had to peel them twice. And on top of that the eggs were hard, not soft. :ahhh
Handyman and eggcup disasterDay 15
Cooking duty again. I've discovered quite recently that the scissors are perfect for cutting herbs. I made pesto again.
I like how the black cellidor scales contrast with the bright green.
Handyman and basilI also opened some packages. A mini digital scale arrived for weighing coffee. I chose one with a removable lid so I could put two cups on it. But mini is indeed mini and I can only fit one. The scales are the size of a Zippo lighter.

Also, another SwissCard arrived. An older model SwissCard Lite, with the red LED.
The Handyman also watched how I ordered another SAK. The son of Zeus is underway... -
@Mactire404 said:
The large blade is very adept in cutting hoses. I've cut gas hoses and garden hoses, all without effort.Day 13
Friday the 13th! Will the Handyman give out? Will one of the springs break? Will I loose my microscrewdriver? Or a toothpick perhaps?
Nope, everything went fine. Not much use during the day but at night the Handyman was used with cooking. Cutting open packages of the sauerkraut and sausage.Handyman, sauerkraut and sausage
Day 14
Ah, weekend. A perfect morning for soft boiled eggs! Unfortunately, Friday the 13th rubbed off on my Saturday the 14th.
The eggs came in some sort of paperfoam. We don't have eggcups so I cut a piece off of the box. The short blade cut through it like butter.
Seemed like a pretty good idea.
When I put the eggs in it tumbled over and the foam melted on the eggs. So I had to peel them twice. And on top of that the eggs were hard, not soft. :ahhhHandyman and eggcup disaster
Day 15
Cooking duty again. I've discovered quite recently that the scissors are perfect for cutting herbs. I made pesto again.
I like how the black cellidor scales contrast with the bright green.Handyman and basil
I also opened some packages. A mini digital scale arrived for weighing coffee. I chose one with a removable lid so I could put two cups on it. But mini is indeed mini and I can only fit one. The scales are the size of a Zippo lighter.

Also, another SwissCard arrived. An older model SwissCard Lite, with the red LED.
The Handyman also watched how I ordered another SAK. The son of Zeus is underway...nice uses and thoughts,
yes those scissors are excellent for herbs 
-
#16 Just some cutting and opening boxes at work today so a pic of the Handyman in a juniper bush

Sent fra min FRD-L09 via Tapatalk
-
Day 16
Didn't bother to take any pictures, but I cut down some boxes.
During lunch I peeled my apple.
It seems the large blade get's most of the use. -
#17 Some light cutting at work, changed a couple of firewarning stickers in the enginebay on a bus

Sent fra min FRD-L09 via Tapatalk
-
Day 16
Wow, we passed half of the challenge!
To be honest it does not really feel like a challenge since I EDC a Handyman of over 20 years now.
So far it does show that I might be a bit over-prepared with a Handyman. The large blade sees most of the use.But for today, it almost went by without using the Handyman apart from making lunch.
The large blade is sufficient enough for cutting hard crusted buns. But the half serrated 111mm excels in this.
Perhaps it's time for a Handyman mod? Handyman serrated? Maybe in the future.
Handyman and KaiserbrötchenI nearly put the SAK down for the rest of the day when my parents dropped by with the mail.
I had some packages coming in and boy, it was a great haul! And all three at the same time!The Handyman performed duty-fully removing the paper, tape and what not.
Again only the large blade was used.
Handyman on mail dutyI got a case for my portable espresso machine, a bunch of seeds (Yuzu) and the son of Zeus arrived: a Hercules with leather case.
-
@Mactire404 said:
Day 16
Wow, we passed half of the challenge!
To be honest it does not really feel like a challenge since I EDC a Handyman of over 20 years now.
So far it does show that I might be a bit over-prepared with a Handyman. The large blade sees most of the use.But for today, it almost went by without using the Handyman apart from making lunch.
The large blade is sufficient enough for cutting hard crusted buns. But the half serrated 111mm excels in this.
Perhaps it's time for a Handyman mod? Handyman serrated? Maybe in the future.
Handyman and KaiserbrötchenI nearly put the SAK down for the rest of the day when my parents dropped by with the mail.
I had some packages coming in and boy, it was a great haul! And all three at the same time!The Handyman performed duty-fully removing the paper, tape and what not.
Again only the large blade was used.
Handyman on mail dutyI got a case for my portable espresso machine, a bunch of seeds (Yuzu) and the son of Zeus arrived: a Hercules with leather case.
Cool! I've been curious about the hercules myself [emoji106]
Sent fra min FRD-L09 via Tapatalk
-
@RF52 said:
Cool! I've been curious about the hercules myself [emoji106]Well, I've been opting for a WorkChamp and from the photo I initially thought I had bought a WorkChamp.
When I realized I didn't see a file in the add I checked again. It turned out to be a Hercules.
I still bought it anyway.
From reviews I expected an insanely large SAK. And it does not really feel that way, perhaps because I'm used to carrying a Handyman all day long.
It's an interesting knife. If I were to buy new I would buy a WorkChamp.
(And given my initial impression of the Hercules I think that I am going to buy the WorkChamp new)If I can find the slide-lock camo scales I'm going to team the Hecules with the Maglite Mini with camo print I got recently.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login