Wruw :)
-
Was wearing this one for a few days . . . just got it and wanted to ensure everything was working well . . . the Victorinox AirBoss Mach 9 . . .

This morning I switched to this Orient Star GMT . . .



John
-
Seiko Spirit "Vanac" SARB003 with 6R15A movement
Seiko's homage to its own "Vanac" line of watches sporting thick faceted crystals. Updated with stainless steel, solid link bracelets and sapphire crystals with an AR coating on the inside. These were a mid-tier premium line offered only in Japan, at least initially, and were never exported to North America. They could be had outside of Japan if one knew where to look for sellers on the Internet. Among one of the first to use the 23 jewel 6R15A automatic movement with hand-wind and hacking when released in 2006. This one was made in April 2006.
John
-
Today is the JeanRichard chronograph. It's not a typical ETA (Valjoux) 7750, and that's one of the reasons I bought it. This one has a DJR 25 under the dial, which is an ETA 2824-2 with a Dubois Depraz DD2020 chronograph module stacked on top of it. As a consequence the date complication is sacrificed. It's also not as thick as a 7750, a movement well-known for not being very thin. Operation is very much like other mechanical chronographs. Not too obvious in this photo, but if you look at the chrono pushers they're forward of the time setting crown. When you see that on a chrono it's a sure bet the chrono complication is a module stacked on top of the rest of the movement.

The black vertical line across the "2" at the "12" is the chrono seconds hand.

John
-
Bulova Curacao 300m
(26j 28.8kbph Sellita SW200-1)Made in 2009, this Curacao 300m was part of Bulova's Swiss Made Accutron line of mechanical watches, which have been renamed "Accu-Swiss" without the Accutron name or tuning fork logo on them. It was part of Bulova's marketing changes for the introduction of the Accutron II quartz watches with Precisionist movements.

Sellita, a Swiss mechanical movement manufacturer, made movement parts and assemblies under contract for ETA for many years. As ETA started shutting down movement sales to companies outside of the Swatch Group, Sellita started making complete movements with Sellita caliber numbers. The SW200 is an ETA 2824-2 clone, made on the same machines and lines that made 2824-2 parts for ETA, which in some cases are newer machines and tooling. Bulova began sourcing movements from Sellita with the shutting down of 2824-2 supply from ETA looming over them as have many other watch companies that had been buying movements from ETA.
John
-
Grovana Coral Reef GMT:
(21j ETA 2893-2 GMT)Grovana uses the Revue Thommen trademarks under license from Thommen, primarily an aviation instrument company, when Grovana took over their watch production in 2001. Revue Thommen is the brand label that they're much better known for and one of the oldest in Switzerland in continuous production. This is a traditional GMT with fourth hand rotating once ever 24 hours that can be adjusted independent of the three main timekeeping hands, and without hacking the watch. The bezel shows 1-24 for the fourth hand and can be rotated in either direction (as compared to unidirectional dive watch timing bezels). This ostensibly allows using two time zones, one for the three main hands and one for the fourth hand. Another time zone can be interpolated from the 1-12 hour indices by multiplying them by two for the fourth hand allowing three time zones by setting the main hands, then the 24-hour hand to an interpolated second hour setting, and then the bezel to a third hour setting. Green bezel rings on GMT watches such as this one has resulted in them be referred to as a Kermit model.

John
-
Great watches and pics John

I'm digging the Victorinox, Orient and Grovana very much
-
My birth year G :)

-
-
@MTMatt said:
My birth year G :)


I´ve got to get a DW-5600 at some point. It´s just perfect.
For me this is even better a dw-5200 aka the hero :)
-
@MTMatt said:
My birth year G :)


I´ve got to get a DW-5600 at some point. It´s just perfect.
For me this is even better a dw-5200 aka the hero :)
Metal case with screwed back???
-
@Ricardomfs said:
My birth year G :)

I have an ancient Casio "Runner" and it's still "running" ;) after over 35 years. These Casio never die unless you take a sledge hammer to them.John
-
Saturday . . .
Rotary Mecanique:
(ETA 2804-2)This is a very special limited edition, #39 of 700 total in this case color with this movement caliber. Rotary made six variants, four men's and two women's using the ETA 2804-2, Peseux (ETA) 7001 and ETA 2660. An ETA 2804-2 is an ETA 2824-2 without the autowind mechanism or hacking function. It's a pure hand-wind. The Peseux 7001 and ETA 2660 are also hand wind. Forget to wind them for a couple days and they stop.
Men's 38x38mm case:
700 ETA 2804-2 in plain stainless
700 ETA 2804-2 in gold stainless
400 Peseux 7001 in plain stainless
400 Peseux 7001 in gold stainlessWomen's 29x29mm case:
400 ETA 2660 in plain stainless
400 ETA 2660 in gold stainlessThe limited edition Mecanique features a true engine turned guilloche dial with real furnace blued hands. "Engine turned" means the dial pattern was cut into the metal dial using a hand-crank machine with a cutting bit and a set pattern that moves the bit similar to a spirograph. Portions of the cutting pattern are deeper than others giving it a depth as well. One can tell a true engine-turned guilloche from its 3-D depth and how light plays on the pattern, changing its appearance as the main lighting angle changes. The crystal is double-domed sapphire and the watch case itself is curved to fit the wrist.

While Rotary had its production Switzerland, its headquarters moved to London during the 1920's if I understood the history correctly (certainly no later than the beginning of WWII), making it a very British brand of Swiss Made watches, reinforced by the company making watches for the British military during the war. At the time of the great-grandson, Robert, taking over the company, it was not in the healthiest of financial conditions, suffering from low revenue like other brands.This limited edition Mecanique was also the Swan Song for the grandson of the company's founder, Moise Dreyfuss, just before the great-grandson took over. The great-grandson, Robert, shifted the market position significantly, introducing inexpensive designer style quart watches in an effort to attract a younger demographic. In spite of this, the Dreyfuss Group with Robert still at the helm, was bought by the China Haiden Holdings, now called Citychamp Watch & Jewellry Group headquartered in Hong Kong, with Robert remaining to run the Drefyuss Group now owned by the Hong Kong conglomerate. It followed a fate similar to Eterna and Corum which are also owned by Citychamp. The consequence has been a dilution of the brand. Only a few Rotary models are being made in Switzerland. Nearly all the others are being made in China with Miyota movements. Citychamp is marketing Rotary within China along with the other brands, leveraging on its historical brand recognition.
From what I understand it continues to be a popular, well recognized brand in the UK, having shifted its target market downscale into the realm of the department store jewelry department Seiko and Citizen quartz. Rotary is not what it once was but the Dreyfuss Group is apparently doing what it believes it needs to in order to survive. The demographics for prestige brand Swiss Made mechanical watches is an extremely tight niche market, a battle for which Rotary was losing when the great-grandson took over operating the company.
I haven't seen a used one of these in excellent condition for less than $1000 USD for some years now.
John
-
Seiko Baby Tuna (modifed)
(SRP453; 4R36A)One of my very few "dive" watches as it's normally not my style. Part of a 2013 unnumbered limited edition by Seiko, and only marketed in certain regions, this one is in blue and was made in June 2013. Had to scour the countryside to find one. They were scarce as hen's teeth and the "flippers" were reselling them for a small fortune. Found an obscure jeweler in Florida that's a Seiko dealer and a minimalist web site geared for advertising their presence locally and not trying to be much of an Internet retailer. They were willing to sell and ship, and the price was reasonably discounted from Seiko MSRP, so I bought it. I don't think the demographic of the store's clientele were clamoring for mechanical dive watches.
A true 200m dive watch, the case back has the Seiko tsunami wave, the Seiko trademark for their watches manufactured and tested to the ISO dive standard for their rated depth. It is called a "tuna" because of the case shroud to protect the timing ring and to some extent the crown, and up-armor the case itself. This one is modified from the original with a Yobokies stainless case shroud and a a Strapcode Endmill bracelet onto which I put a Seiko signed diving clasp (harvested from a Seiko Monster bracelet). Movement inside is the newer 24 jewel Seiko 4R36A with hand-wind and hacking, a movement family that is slowly displacing the aging 7S26/7S36 family.
It's referred to as a "baby tuna" as its 42mm case and 200m depth rating is smaller than Seiko's classic 48mm 300m Marinemaster Professional 300m "Tuna" and the enormous 54.5mm 1000m Marinemaster Professional "Tuna". Both of those have quartz movements and the latter sells for about $2700. Seiko pays homage to its own iconic watches while creating a true 200m diver in the process.

This is what the watch looked like new, with a molded somewhat pliable shroud and neoprene dive strap. Too blue for my taste and I don't care for the neoprene straps much. I replaced the shroud with a stainless steel one made by Yobokies in Hong Kong in limited quantities for a while specifically for these "baby tuna" watches. He specializes in performing mods and selling parts to mod Seiko watches. Replaced the rubber strap with the heavy steel "Endmill" bracelet from Strapcode. Had a clasp left over from a Seiko Monster bracelet that I had put onto another watch with a generic unsigned clasp as it wasn't a Seiko. It fit this one perfectly, an educated guess on my part from its specs.

These two photos give a better perspective of the "tuna can" shroud after replacing the Seiko's plastic one and the strap . . .

The tiny hex head screws hold the shroud onto the underlying stainless steel watch case. There's one more screw on the other side.

As with all Seiko dive watches, the lume is a magnificent beacon . . .

John
-
Interesting watches John.

Is that Seiko diver heavy?
-
@twiliter said:
Interesting watches John.
Is that Seiko diver heavy?
Thanks
As modified with the stainless steel shroud, and Strapcode Endmill bracelet sized for my wrist . . .
183.6 grams
That isn't lightweight, but it's not all that heavy for a mechanical diver. The watch heads on the larger "tuna" after which it's patterned are heavier.By comparison working back up the WRUW . . .
Grovana GMT: 160.1 grams
Bulova Curacao: 184.0The watch I'm wearing today is a Tissot T-Trend Quadrato mechanical chronograph with a 7750 inside. It's notably heavier as it's not only a 7750, it's also a square case which has much more steel than a round one of similar dimensions.
206.9 grams

By necessity a 7750 chrono case will be thick as the movement is tall.

John
-
Tissot T-Trend Quadrato Mechanical Chronograph
T005.514.11.061.00
ETA (Valjoux) 7750Tissot's "T-Trend" line no longer exists. Tissot follows fashion trends more than some other brands and their collections evolve faster. The T-Trend collection came and went after a few years as part of that. Tissot made the Quadratto in both quartz and mechanical models, muddying the waters in trying to find a mechanical. A low price wa the usual indicator of quartz but knowing the reference number(s) for the mechanical is definitive. The quartz version of this chronograph with an ETA G10.211 inside had a street price of about $300 USD new. The Valjoux 7750 was at least several times that. It's easy to tell the chronographs apart if you know where the subdials should be. The quartz has them at the 10-2-6. A straightforward 7750 has its subdials at 6-9-12 with day/date at the 3. The T-Trend line was discontinued a number of years ago and everything I've seen online is "out of stock" now.

The one downside to this specific design is the crown being set down between the pusher and it's decagonal with no knurling. Not as easy to wind the movement as with more accessible crowns. There is a "nail nick" formed into the case below it that isn't obvious until you look, but that helps pull the crown out to set day/date and time.

Dial work and hands have dimensional, texture and pattern subtleties that don't reveal themselves until one lets light play across it watching the highlights shift and change.

It is, as one can see from the side, a chunky watch by necessity to house the tall 7750 movement, and it's not a lightweight either with a square case. The mass of the head would be particularly noticeable on a leather strap. The bracelet helps to counterbalance it even though it adds to overall mass.
There was some talk that the Tissot Quadrato models within their (former) T-Trend line were inspired by Breaking Bad and the Monaco chronograph White was given. Not so. The Quadrato watches pre-dated that, following a fashion trend with square and rectangular watch cases that came and went as such trends usually do. Wait long enough and the square case will return. In the meantime I will continue to enjoy the visual beauty of its case shape with the dial and hands in particular. I'm not a chronograph aficionado although I've got a few. Pursued finding this one as it was visually more interesting to me than the 3-hand with date version housing an ETA 2824-2 inside.
John
-
More nice ones John!

I think you have more watches than I have SAKs! :ahhh
Here's my one watch again, keeping good time. Vic lists this as weighing 96.3g, and the titanium doesn't bother my skin in the least. The paracord strap is way more comfy than I ever expected, and it's easy to adjust when my wrist shrinks or swells, depending on what I'm doing (or not doing), or if I get it wet (the strap shrinks a small amount). I have fallen asleep with it on, so it's super wearable, which is the one thing I wanted (aside from legibility, watches that are hard to read hold no appeal for me). I probably overshot the mark for having a single watch, I'm happy with it, but I read that Vic will be releasing the INOX automatic in October. I will be interested in that, but if they don't offer it in titanium, I'll probably pass, this one is fine with me. :)

-
@twiliter said:
More nice ones John!
I think you have more watches than I have SAKs! :ahhh
Here's my one watch again, keeping good time. Vic lists this as weighing 96.3g, and the titanium doesn't bother my skin in the least. The paracord strap is way more comfy than I ever expected, and it's easy to adjust when my wrist shrinks or swells, depending on what I'm doing (or not doing), or if I get it wet (the strap shrinks a small amount). I have fallen asleep with it on, so it's super wearable, which is the one thing I wanted (aside from legibility, watches that are hard to read hold no appeal for me). I probably overshot the mark for having a single watch, I'm happy with it, but I read that Vic will be releasing the INOX automatic in October. I will be interested in that, but if they don't offer it in titanium, I'll probably pass, this one is fine with me. :)
Thanks!
Did you see my answer to your question about the Seiko above?
About 2x the weight of your INOX, some of which is the steel bracelet.
Gave the weight of a few others for comparison.I do have a few watches and usually wear nearly all of them in rotation. Hadn't been for a while but started again. Mechanicals, in general, are heavier than the equivalent quartz due to the movements, including the materials they're made of. Quartz use a good amount of plastic as the movement isn't undergoing the stress of a mainspring.
Very nice Vic INOX Ti

I like its hour markings combined with the chapter ring for minutes and seconds. It's uncluttered making it very easy to read quickly.I don't have any Titanium watches but have handled a few and they're extremely light compared to steel or precious metals. A heavy watch on my wrist doesn't bother me, not nearly as much as one that's very large and doesn't wear well. My one Invicta that I half regret buying has mediocre fit and finish on the case and terrible fit and finish on the steel bracelet. Had to spend significant amount of time putting a very small chamfer to round the edges of the links.
John
-
I saw that John, thanks. I don't know what a watch twice as heavy would be like because I have no experience with it, but I would think I could get used to it. I think if I started with a G Shock, that mine would feel heavy too, all about what you're used to probably. I just wonder how heavy I could go without feeling like I needed something on the other wrist to balance it out. ???
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login