Wruw :)
-
My birth year G :)

-
-
@MTMatt said:
My birth year G :)


I´ve got to get a DW-5600 at some point. It´s just perfect.
For me this is even better a dw-5200 aka the hero :)
-
@MTMatt said:
My birth year G :)


I´ve got to get a DW-5600 at some point. It´s just perfect.
For me this is even better a dw-5200 aka the hero :)
Metal case with screwed back???
-
@Ricardomfs said:
My birth year G :)

I have an ancient Casio "Runner" and it's still "running" ;) after over 35 years. These Casio never die unless you take a sledge hammer to them.John
-
Saturday . . .
Rotary Mecanique:
(ETA 2804-2)This is a very special limited edition, #39 of 700 total in this case color with this movement caliber. Rotary made six variants, four men's and two women's using the ETA 2804-2, Peseux (ETA) 7001 and ETA 2660. An ETA 2804-2 is an ETA 2824-2 without the autowind mechanism or hacking function. It's a pure hand-wind. The Peseux 7001 and ETA 2660 are also hand wind. Forget to wind them for a couple days and they stop.
Men's 38x38mm case:
700 ETA 2804-2 in plain stainless
700 ETA 2804-2 in gold stainless
400 Peseux 7001 in plain stainless
400 Peseux 7001 in gold stainlessWomen's 29x29mm case:
400 ETA 2660 in plain stainless
400 ETA 2660 in gold stainlessThe limited edition Mecanique features a true engine turned guilloche dial with real furnace blued hands. "Engine turned" means the dial pattern was cut into the metal dial using a hand-crank machine with a cutting bit and a set pattern that moves the bit similar to a spirograph. Portions of the cutting pattern are deeper than others giving it a depth as well. One can tell a true engine-turned guilloche from its 3-D depth and how light plays on the pattern, changing its appearance as the main lighting angle changes. The crystal is double-domed sapphire and the watch case itself is curved to fit the wrist.

While Rotary had its production Switzerland, its headquarters moved to London during the 1920's if I understood the history correctly (certainly no later than the beginning of WWII), making it a very British brand of Swiss Made watches, reinforced by the company making watches for the British military during the war. At the time of the great-grandson, Robert, taking over the company, it was not in the healthiest of financial conditions, suffering from low revenue like other brands.This limited edition Mecanique was also the Swan Song for the grandson of the company's founder, Moise Dreyfuss, just before the great-grandson took over. The great-grandson, Robert, shifted the market position significantly, introducing inexpensive designer style quart watches in an effort to attract a younger demographic. In spite of this, the Dreyfuss Group with Robert still at the helm, was bought by the China Haiden Holdings, now called Citychamp Watch & Jewellry Group headquartered in Hong Kong, with Robert remaining to run the Drefyuss Group now owned by the Hong Kong conglomerate. It followed a fate similar to Eterna and Corum which are also owned by Citychamp. The consequence has been a dilution of the brand. Only a few Rotary models are being made in Switzerland. Nearly all the others are being made in China with Miyota movements. Citychamp is marketing Rotary within China along with the other brands, leveraging on its historical brand recognition.
From what I understand it continues to be a popular, well recognized brand in the UK, having shifted its target market downscale into the realm of the department store jewelry department Seiko and Citizen quartz. Rotary is not what it once was but the Dreyfuss Group is apparently doing what it believes it needs to in order to survive. The demographics for prestige brand Swiss Made mechanical watches is an extremely tight niche market, a battle for which Rotary was losing when the great-grandson took over operating the company.
I haven't seen a used one of these in excellent condition for less than $1000 USD for some years now.
John
-
Seiko Baby Tuna (modifed)
(SRP453; 4R36A)One of my very few "dive" watches as it's normally not my style. Part of a 2013 unnumbered limited edition by Seiko, and only marketed in certain regions, this one is in blue and was made in June 2013. Had to scour the countryside to find one. They were scarce as hen's teeth and the "flippers" were reselling them for a small fortune. Found an obscure jeweler in Florida that's a Seiko dealer and a minimalist web site geared for advertising their presence locally and not trying to be much of an Internet retailer. They were willing to sell and ship, and the price was reasonably discounted from Seiko MSRP, so I bought it. I don't think the demographic of the store's clientele were clamoring for mechanical dive watches.
A true 200m dive watch, the case back has the Seiko tsunami wave, the Seiko trademark for their watches manufactured and tested to the ISO dive standard for their rated depth. It is called a "tuna" because of the case shroud to protect the timing ring and to some extent the crown, and up-armor the case itself. This one is modified from the original with a Yobokies stainless case shroud and a a Strapcode Endmill bracelet onto which I put a Seiko signed diving clasp (harvested from a Seiko Monster bracelet). Movement inside is the newer 24 jewel Seiko 4R36A with hand-wind and hacking, a movement family that is slowly displacing the aging 7S26/7S36 family.
It's referred to as a "baby tuna" as its 42mm case and 200m depth rating is smaller than Seiko's classic 48mm 300m Marinemaster Professional 300m "Tuna" and the enormous 54.5mm 1000m Marinemaster Professional "Tuna". Both of those have quartz movements and the latter sells for about $2700. Seiko pays homage to its own iconic watches while creating a true 200m diver in the process.

This is what the watch looked like new, with a molded somewhat pliable shroud and neoprene dive strap. Too blue for my taste and I don't care for the neoprene straps much. I replaced the shroud with a stainless steel one made by Yobokies in Hong Kong in limited quantities for a while specifically for these "baby tuna" watches. He specializes in performing mods and selling parts to mod Seiko watches. Replaced the rubber strap with the heavy steel "Endmill" bracelet from Strapcode. Had a clasp left over from a Seiko Monster bracelet that I had put onto another watch with a generic unsigned clasp as it wasn't a Seiko. It fit this one perfectly, an educated guess on my part from its specs.

These two photos give a better perspective of the "tuna can" shroud after replacing the Seiko's plastic one and the strap . . .

The tiny hex head screws hold the shroud onto the underlying stainless steel watch case. There's one more screw on the other side.

As with all Seiko dive watches, the lume is a magnificent beacon . . .

John
-
Interesting watches John.

Is that Seiko diver heavy?
-
@twiliter said:
Interesting watches John.
Is that Seiko diver heavy?
Thanks
As modified with the stainless steel shroud, and Strapcode Endmill bracelet sized for my wrist . . .
183.6 grams
That isn't lightweight, but it's not all that heavy for a mechanical diver. The watch heads on the larger "tuna" after which it's patterned are heavier.By comparison working back up the WRUW . . .
Grovana GMT: 160.1 grams
Bulova Curacao: 184.0The watch I'm wearing today is a Tissot T-Trend Quadrato mechanical chronograph with a 7750 inside. It's notably heavier as it's not only a 7750, it's also a square case which has much more steel than a round one of similar dimensions.
206.9 grams

By necessity a 7750 chrono case will be thick as the movement is tall.

John
-
Tissot T-Trend Quadrato Mechanical Chronograph
T005.514.11.061.00
ETA (Valjoux) 7750Tissot's "T-Trend" line no longer exists. Tissot follows fashion trends more than some other brands and their collections evolve faster. The T-Trend collection came and went after a few years as part of that. Tissot made the Quadratto in both quartz and mechanical models, muddying the waters in trying to find a mechanical. A low price wa the usual indicator of quartz but knowing the reference number(s) for the mechanical is definitive. The quartz version of this chronograph with an ETA G10.211 inside had a street price of about $300 USD new. The Valjoux 7750 was at least several times that. It's easy to tell the chronographs apart if you know where the subdials should be. The quartz has them at the 10-2-6. A straightforward 7750 has its subdials at 6-9-12 with day/date at the 3. The T-Trend line was discontinued a number of years ago and everything I've seen online is "out of stock" now.

The one downside to this specific design is the crown being set down between the pusher and it's decagonal with no knurling. Not as easy to wind the movement as with more accessible crowns. There is a "nail nick" formed into the case below it that isn't obvious until you look, but that helps pull the crown out to set day/date and time.

Dial work and hands have dimensional, texture and pattern subtleties that don't reveal themselves until one lets light play across it watching the highlights shift and change.

It is, as one can see from the side, a chunky watch by necessity to house the tall 7750 movement, and it's not a lightweight either with a square case. The mass of the head would be particularly noticeable on a leather strap. The bracelet helps to counterbalance it even though it adds to overall mass.
There was some talk that the Tissot Quadrato models within their (former) T-Trend line were inspired by Breaking Bad and the Monaco chronograph White was given. Not so. The Quadrato watches pre-dated that, following a fashion trend with square and rectangular watch cases that came and went as such trends usually do. Wait long enough and the square case will return. In the meantime I will continue to enjoy the visual beauty of its case shape with the dial and hands in particular. I'm not a chronograph aficionado although I've got a few. Pursued finding this one as it was visually more interesting to me than the 3-hand with date version housing an ETA 2824-2 inside.
John
-
More nice ones John!

I think you have more watches than I have SAKs! :ahhh
Here's my one watch again, keeping good time. Vic lists this as weighing 96.3g, and the titanium doesn't bother my skin in the least. The paracord strap is way more comfy than I ever expected, and it's easy to adjust when my wrist shrinks or swells, depending on what I'm doing (or not doing), or if I get it wet (the strap shrinks a small amount). I have fallen asleep with it on, so it's super wearable, which is the one thing I wanted (aside from legibility, watches that are hard to read hold no appeal for me). I probably overshot the mark for having a single watch, I'm happy with it, but I read that Vic will be releasing the INOX automatic in October. I will be interested in that, but if they don't offer it in titanium, I'll probably pass, this one is fine with me. :)

-
@twiliter said:
More nice ones John!
I think you have more watches than I have SAKs! :ahhh
Here's my one watch again, keeping good time. Vic lists this as weighing 96.3g, and the titanium doesn't bother my skin in the least. The paracord strap is way more comfy than I ever expected, and it's easy to adjust when my wrist shrinks or swells, depending on what I'm doing (or not doing), or if I get it wet (the strap shrinks a small amount). I have fallen asleep with it on, so it's super wearable, which is the one thing I wanted (aside from legibility, watches that are hard to read hold no appeal for me). I probably overshot the mark for having a single watch, I'm happy with it, but I read that Vic will be releasing the INOX automatic in October. I will be interested in that, but if they don't offer it in titanium, I'll probably pass, this one is fine with me. :)
Thanks!
Did you see my answer to your question about the Seiko above?
About 2x the weight of your INOX, some of which is the steel bracelet.
Gave the weight of a few others for comparison.I do have a few watches and usually wear nearly all of them in rotation. Hadn't been for a while but started again. Mechanicals, in general, are heavier than the equivalent quartz due to the movements, including the materials they're made of. Quartz use a good amount of plastic as the movement isn't undergoing the stress of a mainspring.
Very nice Vic INOX Ti

I like its hour markings combined with the chapter ring for minutes and seconds. It's uncluttered making it very easy to read quickly.I don't have any Titanium watches but have handled a few and they're extremely light compared to steel or precious metals. A heavy watch on my wrist doesn't bother me, not nearly as much as one that's very large and doesn't wear well. My one Invicta that I half regret buying has mediocre fit and finish on the case and terrible fit and finish on the steel bracelet. Had to spend significant amount of time putting a very small chamfer to round the edges of the links.
John
-
I saw that John, thanks. I don't know what a watch twice as heavy would be like because I have no experience with it, but I would think I could get used to it. I think if I started with a G Shock, that mine would feel heavy too, all about what you're used to probably. I just wonder how heavy I could go without feeling like I needed something on the other wrist to balance it out. ???
-
Also, I have never swam down more than 4 or 5 meters, so the 200m dive rating is overkill for me. I don't scuba dive, so I don't see the point of that much water resistance personally. I have flown at very high altitudes, but in a pressurized cabin, so that's overkill too. So I suppose if I ever fell out of an airplane at extreme altitude over the Mariana trench and sank to 200 meters my watch would survive (if they ever found me). :D I guess it's a good selling point seeing how many dive watches there are. It's like the cap crimper MTs, how many do they make vs. how many people really need one... ::)
I must admit dive watches are way cooler than cap crimper MTs though. :D
-
@twiliter said:
Also, I have never swam down more than 4 or 5 meters, so the 200m dive rating is overkill for me. I don't scuba dive, so I don't see the point of that much water resistance personally. I have flown at very high altitudes, but in a pressurized cabin, so that's overkill too. So I suppose if I ever fell out of an airplane at extreme altitude over the Mariana trench and sank to 200 meters my watch would survive (if they ever found me). :D I guess it's a good selling point seeing how many dive watches there are. It's like the cap crimper MTs, how many do they make vs. how many people really need one... ::)I must admit dive watches are way cooler than cap crimper MTs though. :D
Similar to some of my thoughts regarding dive watches. If I fall overboard and it's heavy enough it will pull me down into the deep, unable to surface and in my panic, unable to get it off my wrist. When they finally recover my remains, the watch will still be fully functional, having survived what I did not. :D
Helium Release Valves:
I am amused when I see helium release valves on watches and office "Desk Divers" wearing them. Few who own a dive watch with one understand what it's for unless they've been around commercial deep diving operations. Only those doing professional saturation diving to extreme depths and living in a sealed accommodation chamber pressurized for that depth for days or weeks at a time would ever need one. A large pressurized hyperbaric chamber is maintained on the surface, or an ambient one is maintained at the working depth under water. It has everything needed for a crew to live for days or weeks at a time. The chamber is slowly pressurized to their planned underwater working depth and it's maintained for the duration of days or weeks the crew will be working at that depth. From a surface chamber system, the diving crew using a large pressurized diving bell they enter through a transfer chamber to descend and ascend from their working depth under water which can be done quite rapidly as there is no compression or decompression taking place. At the end of their work tour, which can be days or weeks, they start dry decompression to sea level in their pressurized accommodation chamber. This can take several days if they've been working very deep. It's called saturation diving because the air is a special mix of oxygen, hydrogen and helium. The watch will have very slowly taken on helium around its gaskets in the environment in which they were living. If it weren't allowed to escape from the watch through that valve, it could blow the crystal off the watch and that phenomenon is what led to the helium valve being put on watches for saturation diving. All he screw-down for it does is enable the valve to operate when the pressure inside the watch exceeds pressure outside the watch, it could blow the crystal off the watch. The valve itself is weaker than the rest of the watch case so it's kept shut (screwed down) unless it's actually being used during dry decompression. Some watches have bezel, crystal and gasket designs that eliminate the need for a helium valve. A commercial diver doing deep dives for short periods using wet compression and decompression during the dive itself would never need or use one.More about saturation diving here:
https://en.wikipedia.org/wiki/Saturation_divingJohn
-
Xezo Air Commando GMT
21j ETA 2893-2Xezo is a small company based in Texas that specializes in sunglasses, pens and watches for men. They have offered some leather goods in the past. Their watches are made for them by a company in Switzerland, and the pens by a company in Germany, to specs from the company in Texas. This kind of arrangement is often referred to as "Private Label" and finding out exactly who in Switzerland is making them for Xezo can be difficult as it's usually protected by non-disclosure agreements. The company is in Lengnau but there are a number of Swiss watch companies located there and I wouldn't try to hazard a guess.
This GMT is powered by an ETA 2893-2, a 2892A2 with a 4th central 24-hour GMT hand and date display. The 2892A2 is generally considered a step up from the 2824 family as it's a newer design and tends to be used in more expensive timepieces, but for all practical purposes it isn't much of one in most applications. The 2892A2 is used as a base movement (ebauche) for many prestige and luxury watches, such as Omega, onto which they place their own in-house parts to complete the movement (typically proprietary regulating mechanisms and/or complications). ETA only offers three grades in the 2892 family, omitting the lowest, basic one available for the 2824 family.

It's called an Air Commando as the chapter ring and bezel allow for performing a timing function in the manner used prior to the development of the chronograph stopwatch type complication. The additional screw-down crown at the ten allows rotating the chapter ring numbered 1-12 in light blue. The bezel is numbered in minutes with unidirectional rotation. Elapsed time can be measured by aligning the main index of the hour chapter ring with the main hour hand for elapsed hours, and the index on the bezel for elapsed minutes by aligning it with the main minutes hand. Long distance flight plans generally have several legs to follow at different compass headings for different distances. At a known ground speed, the amount of time to be flown at the heading for each leg can be calculated. Some chronographs, such as the Soviet Poljot Shturmanskie, used a combination of stopwatch mechanism for elapsed minutes (in 30 minute increments) and a rotating chapter ring to measure elapsed hours. The method used with this watch is definitely old-school.
The fourth, 24-hour hand is used with the smaller 1-24 indices in red Arabic and can be set independently of the main 12-hour time. It would ostensibly be set to GMT for navigation purposes as that would be used with a sextant for calculating longitude. At one time, sextants were carried and used by navigators in long-distance aircraft. The C-141 military cargo jet had a sextant dome above the flight deck when they were built (I flew in one that still had it). AFIK, they've all been capped over now. The rotating 12-hour chapter ring can be used for a third time zone if desired.

The silver dial has a very nice guilloche pattern, but unlike the Rotary, this one is not engine turned. It appears to be stamped into the dial with some three dimensional scalloped depth to give it the appearance of an engine turned dial. Likewise, the blue hands are colored to have the appearance of flame or furnace blued hands. Sapphire crystal has an AR coating on the underside. The result is a retro style and function using modern materials and movement.
This was my first true GMT watch. Xezo still makes an Air Commando line, but only the GMT has an ETA 2893-2, and its price reflects that. The other, non-GMT mechanical have Miyota 9015 movements inside and all but one of the chronographs are all Ronda quartz movements. The one model with a Valjoux 7750 inside is obvious from the dial layout and its very high price. Xezo is one of the companies that felt the squeeze as ETA started reducing supply of movements, the 2824 family in particular, to companies outside the Swatch Group. Xezo has watches made in limited edition batches. This one is #30 of 500 total. If the line is continued, a change is made to the design or style to differentiate it from prior editions.
John
-
@jalind said:
Tissot T-Trend Quadrato Mechanical ChronographT005.514.11.061.00
ETA (Valjoux) 7750Tissot's "T-Trend" line no longer exists. Tissot follows fashion trends more than some other brands and their collections evolve faster. The T-Trend collection came and went after a few years as part of that. Tissot made the Quadratto in both quartz and mechanical models, muddying the waters in trying to find a mechanical. A low price wa the usual indicator of quartz but knowing the reference number(s) for the mechanical is definitive. The quartz version of this chronograph with an ETA G10.211 inside had a street price of about $300 USD new. The Valjoux 7750 was at least several times that. It's easy to tell the chronographs apart if you know where the subdials should be. The quartz has them at the 10-2-6. A straightforward 7750 has its subdials at 6-9-12 with day/date at the 3. The T-Trend line was discontinued a number of years ago and everything I've seen online is "out of stock" now.

The one downside to this specific design is the crown being set down between the pusher and it's decagonal with no knurling. Not as easy to wind the movement as with more accessible crowns. There is a "nail nick" formed into the case below it that isn't obvious until you look, but that helps pull the crown out to set day/date and time.

Dial work and hands have dimensional, texture and pattern subtleties that don't reveal themselves until one lets light play across it watching the highlights shift and change.

It is, as one can see from the side, a chunky watch by necessity to house the tall 7750 movement, and it's not a lightweight either with a square case. The mass of the head would be particularly noticeable on a leather strap. The bracelet helps to counterbalance it even though it adds to overall mass.
There was some talk that the Tissot Quadrato models within their (former) T-Trend line were inspired by Breaking Bad and the Monaco chronograph White was given. Not so. The Quadrato watches pre-dated that, following a fashion trend with square and rectangular watch cases that came and went as such trends usually do. Wait long enough and the square case will return. In the meantime I will continue to enjoy the visual beauty of its case shape with the dial and hands in particular. I'm not a chronograph aficionado although I've got a few. Pursued finding this one as it was visually more interesting to me than the 3-hand with date version housing an ETA 2824-2 inside.
John
That watch carries a lot of character.
The chunky appearence suits it well
-
Also, I have never swam down more than 4 or 5 meters, so the 200m dive rating is overkill for me. I don't scuba dive, so I don't see the point of that much water resistance personally. I have flown at very high altitudes, but in a pressurized cabin, so that's overkill too. So I suppose if I ever fell out of an airplane at extreme altitude over the Mariana trench and sank to 200 meters my watch would survive (if they ever found me). :D I guess it's a good selling point seeing how many dive watches there are. It's like the cap crimper MTs, how many do they make vs. how many people really need one... ::)
I must admit dive watches are way cooler than cap crimper MTs though. :D
Similar to some of my thoughts regarding dive watches. If I fall overboard and it's heavy enough it will pull me down into the deep, unable to surface and in my panic, unable to get it off my wrist. When they finally recover my remains, the watch will still be fully functional, having survived what I did not. :D
Helium Release Valves:
I am amused when I see helium release valves on watches and office "Desk Divers" wearing them. Few who own a dive watch with one understand what it's for unless they've been around commercial deep diving operations. Only those doing professional saturation diving to extreme depths and living in a sealed accommodation chamber pressurized for that depth for days or weeks at a time would ever need one. A large pressurized hyperbaric chamber is maintained on the surface, or an ambient one is maintained at the working depth under water. It has everything needed for a crew to live for days or weeks at a time. The chamber is slowly pressurized to their planned underwater working depth and it's maintained for the duration of days or weeks the crew will be working at that depth. From a surface chamber system, the diving crew using a large pressurized diving bell they enter through a transfer chamber to descend and ascend from their working depth under water which can be done quite rapidly as there is no compression or decompression taking place. At the end of their work tour, which can be days or weeks, they start dry decompression to sea level in their pressurized accommodation chamber. This can take several days if they've been working very deep. It's called saturation diving because the air is a special mix of oxygen, hydrogen and helium. The watch will have very slowly taken on helium around its gaskets in the environment in which they were living. If it weren't allowed to escape from the watch through that valve, it could blow the crystal off the watch and that phenomenon is what led to the helium valve being put on watches for saturation diving. All he screw-down for it does is enable the valve to operate when the pressure inside the watch exceeds pressure outside the watch, it could blow the crystal off the watch. The valve itself is weaker than the rest of the watch case so it's kept shut (screwed down) unless it's actually being used during dry decompression. Some watches have bezel, crystal and gasket designs that eliminate the need for a helium valve. A commercial diver doing deep dives for short periods using wet compression and decompression during the dive itself would never need or use one.More about saturation diving here:
https://en.wikipedia.org/wiki/Saturation_divingJohn
A treat to read John, even I understood it :D
-
@MTMatt said:
Tissot T-Trend Quadrato Mechanical Chronograph
T005.514.11.061.00
ETA (Valjoux) 7750Tissot's "T-Trend" line no longer exists. Tissot follows fashion trends more than some other brands and their collections evolve faster. The T-Trend collection came and went after a few years as part of that. Tissot made the Quadratto in both quartz and mechanical models, muddying the waters in trying to find a mechanical. A low price wa the usual indicator of quartz but knowing the reference number(s) for the mechanical is definitive. The quartz version of this chronograph with an ETA G10.211 inside had a street price of about $300 USD new. The Valjoux 7750 was at least several times that. It's easy to tell the chronographs apart if you know where the subdials should be. The quartz has them at the 10-2-6. A straightforward 7750 has its subdials at 6-9-12 with day/date at the 3. The T-Trend line was discontinued a number of years ago and everything I've seen online is "out of stock" now.

The one downside to this specific design is the crown being set down between the pusher and it's decagonal with no knurling. Not as easy to wind the movement as with more accessible crowns. There is a "nail nick" formed into the case below it that isn't obvious until you look, but that helps pull the crown out to set day/date and time.

Dial work and hands have dimensional, texture and pattern subtleties that don't reveal themselves until one lets light play across it watching the highlights shift and change.

It is, as one can see from the side, a chunky watch by necessity to house the tall 7750 movement, and it's not a lightweight either with a square case. The mass of the head would be particularly noticeable on a leather strap. The bracelet helps to counterbalance it even though it adds to overall mass.
There was some talk that the Tissot Quadrato models within their (former) T-Trend line were inspired by Breaking Bad and the Monaco chronograph White was given. Not so. The Quadrato watches pre-dated that, following a fashion trend with square and rectangular watch cases that came and went as such trends usually do. Wait long enough and the square case will return. In the meantime I will continue to enjoy the visual beauty of its case shape with the dial and hands in particular. I'm not a chronograph aficionado although I've got a few. Pursued finding this one as it was visually more interesting to me than the 3-hand with date version housing an ETA 2824-2 inside.
John
That watch carries a lot of character.
The chunky appearence suits it well
Thanks
That's exactly what attracted me to the chronograph model in particular.There isn't much else around like it unless you consider the current Tag Heuer "Monaco" which is a replica of the original Heuer Monaco made famous by Steve McQueen in the 1971 film, Le Mans. The Tag Heuer has a completely different dial layout, and its crown is on the left with the pushers on the right. Only resemblance to the Tissot is the square case shape.
Tissot is one of the eighteen watch companies that are part of the Swatch Group. It's in the middle tier alongside Hamilton, Mido, Certina and a couple others. Below them is a basic tier. Above them is a high tier, and above that is the prestige and luxury tier. There are two very large groups in Switzerland among numerous smaller ones and independent companies. The Richemont Group is the other big one with another eighteen watch companies under its umbrella, the most well-know of which is Officine Panerai.
John
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login
