PowerPint Overview Mighty Little MT
-
@Exeter said:
Great overview and nice pics.
I second the Juice comparison request!Thank you for the kind words, Exeter!

@ReamerPunch said:
Thanks for sharing!
I think I like it. Not sure. Hopefully the price will go down instead of up, and I won't regret having waited.Looking forward to the reviews on this.
You're welcome, RP!

I have been using it for a few hours so far and I actually like the toolset on it. Except the file(won't file anything down except my fingernails and that takes a lot of pressure to do). The scissors are surprisingly good on my Pint. Still haven't decided on which 1/4 hex bits to throw in a pill caddy in my pocket for the Pint though. :ahhh -
Totally nit-picking but I can't seem to find an actual closed length measurement anywhere, nor can I find a width measurement.
Do your have a scale to measure weight to see if the quoted 4.2 oz. is accurate?
Also, is there anything on the tool to indicate that it is a first production run?
Sorry to have some many questions... info on this tool is scarce!
@DeezNittles said:
Ah... I see now on the packaging that it states a closed length of 3.2 inches which would make it only 0.05 inches shorter than a Juice. However, in pics it looks relatively more shorter than the Xe6. Interesting.No problem. I don't mind answering questions at all. It is pretty expensive for what it is. If I weren't an MT collector, I would have been hesitant as well buying it.

The weight and measurement is correct. I don't quite know how to explain this, but the PowerPint feels "small", but in a good way. It has the same 'technical' dimensions of an XE6, but in no way feels as big. The XE6 is huge for a Juice though. I don't normally collect smaller MTs, so I don't have a normal size Juice ti compare it to. :ahhh
The weight must be the biggest factor. It ia really light in hand (feel) and the pocket clip makes is disappear almost in my front right pocket. I do want to note that left front pocket carry may see the tool folding open, since the clip is on the tool end of the handle (unlike the plier end on the access).I took some more pictures that may shed some light on what I mean by feeling smaller. The compound leverage system takes up a lot of "tool length room" in the PowerPint, so the toola are smaller than the Juices by quite a bit. But, with the compound leverage, you can theoretically get a stronger grip with the pliers on the Pint. The plier end of the Pint is not bulky like thw Juice, so that means you can get a better grip on flush objects and do more detailed oriented plier tasks.

As I have an XE6 too, this was a perfect comparison, thanks!

My PowerPint was shipped today, so I'm pretty excited, although it's still a week at best, maybe much more if they pull it for customs procedure. Anyway, looks really good and pretty much what I imagined.
-
@Exeter said:
As I have an XE6 too, this was a perfect comparison, thanks!
My PowerPint was shipped today, so I'm pretty excited, although it's still a week at best, maybe much more if they pull it for customs procedure. Anyway, looks really good and pretty much what I imagined.
You're quite welcome, Exeter!

Fingers crossed that your PowerPint is as good as the one I received!
I do not feel like I wasted my money on the Pint. Hopefully that won't change.Being a collector, I feel like I wasted money on MTs on a weekly basis. So the Pint was a pleasant surprise.

-
-
-
Some more photos starring the PowerPint, PowerAccess, and PowerAccess Deluxe.




-
was about to order one last night when knifecenter had free shipping, but wanted to wait to see impressions.Now kicking myself as Knife Center doesn’t have free shipping anymore! Not going to pay an additional $8.
Looks like I’m playing the waiting game.

-
-
@DeezNittles said:
was about to order one last night when knifecenter had free shipping, but wanted to wait to see impressions.Now kicking myself as Knife Center doesn’t have free shipping anymore! Not going to pay an additional $8.
Looks like I’m playing the waiting game.

Hopefully they will put it back to free shipping soon!
-
-
-
-
Thanks for the excellent writeup and overview, and the pic comparison is very useful.
man is this tool small! :ahhhAnd with the clip it sure feels like a feather in your pocket. I like the finer pliers and C. Leverage, which allow for precise but super powerful gripping action and pulling, something hard to achieve with smaller MTs.
The awl is a new style that I'm not used to but the older awls in the PL, PP and other old SOGs are my favorite style of awls in all MTs, not including Alox SAKs. This one doesn't seem as good.
The mini screwdriver is much welcome in the 21st century, given the amount of mini screws everywhere.
The bit driver should provide excellent reach capabilities if you carry an extender with your bits, multiplying the versatility of this tool. Also much better to apply force and pressure to a driver that is centered between the tool's handles 
very good so far, if not for the high price this ought to be a best seller and game changer for SOG! Hopefully a better QC and tools like this will make it a champion and serious contender in the multitool world

-
@Sam Lim said:
I have one on the way from KC as well but probably another 2 to 3 weeks wait before its reaches me on the other side of the globe. I am liking the size so far. Thanks for the pics and the overview GLBM!
You're quite welcome, Sam Lim!

It also seems like a tool with mod potential. I removed a pivot pin to stretch the clip out a bit for my thicker jean pocket and the screw and threads looked good. They are fine threads, but screw in deep. The torx head pin didn't act like it was going to strip out when breaking the loctite(some kind of thread glue I am not familiar with).
I hope the one you receive is as good as the on I received.
-
@Sam Lim said:
I have one on the way from KC as well but probably another 2 to 3 weeks wait before its reaches me on the other side of the globe. I am liking the size so far. Thanks for the pics and the overview GLBM!

You're quite welcome, Sam Lim!

It also seems like a tool with mod potential. I removed a pivot pin to stretch the clip out a bit for my thicker jean pocket and the screw and threads looked good. They are fine threads, but screw in deep. The torx head pin didn't act like it was going to strip out when breaking the loctite(some kind of thread glue I am not familiar with).
I hope the one you receive is as good as the on I received.
Another good bit of info that is good to hear as I'm thinking about removing the clip, it looks a bit strangely angled and also in general I'm not really a pocket clip person, I'd rather carry it in the pocket especially now that I have caddies. This way the removal will be no problem.
-
@ThePeacent said:
Thanks for the excellent writeup and overview, and the pic comparison is very useful.
man is this tool small! :ahhhAnd with the clip it sure feels like a feather in your pocket. I like the finer pliers and C. Leverage, which allow for precise but super powerful gripping action and pulling, something hard to achieve with smaller MTs.
The awl is a new style that I'm not used to but the older awls in the PL, PP and other old SOGs are my favorite style of awls in all MTs, not including Alox SAKs. This one doesn't seem as good.
The mini screwdriver is much welcome in the 21st century, given the amount of mini screws everywhere.
The bit driver should provide excellent reach capabilities if you carry an extender with your bits, multiplying the versatility of this tool. Also much better to apply force and pressure to a driver that is centered between the tool's handles 
very good so far, if not for the high price this ought to be a best seller and game changer for SOG! Hopefully a better QC and tools like this will make it a champion and serious contender in the multitool world

You're welcome, TP!

I think the awl is a fair compromise with its' smaller shape and grind, but I haven't tried it yet. Maybe today I can give it a try.
Indded, the on-board mini drivers are a good call on SOG's part. And the bit gripper seens to hold the bit well. Just hoping the magnet thing doesn't turn out to be a source of failure. I have been trying it on different screws and the has so far been acceptable.If the other Pints they ship out are as well assembled as mine, they will have a nice tool that is a notable detour in the MT world. This and the PowerAccess Deluxe are probably the best tools SOG has released in a long time. Hope they don't screw this up.

-
@Sam Lim said:
I have one on the way from KC as well but probably another 2 to 3 weeks wait before its reaches me on the other side of the globe. I am liking the size so far. Thanks for the pics and the overview GLBM!

You're quite welcome, Sam Lim!

It also seems like a tool with mod potential. I removed a pivot pin to stretch the clip out a bit for my thicker jean pocket and the screw and threads looked good. They are fine threads, but screw in deep. The torx head pin didn't act like it was going to strip out when breaking the loctite(some kind of thread glue I am not familiar with).
I hope the one you receive is as good as the on I received.
Another good bit of info that is good to hear as I'm thinking about removing the clip, it looks a bit strangely angled and also in general I'm not really a pocket clip person, I'd rather carry it in the pocket especially now that I have caddies. This way the removal will be no problem.
One thing to note is that the pin extends into the clip's mounting hole, so you'll need a washer to take up the space the clip did on the pivot pin. The washer will ens up on the outside of the frame, which isn't a big deal. You could grind the pin down, but a washer gives you the option to put the clip back on.

-
-
-
I received mine today!! It came much faster than expected. And the package was really, small.
Out of package, I have to say I am not too pleased with what I have received.Having fortunately/unfortunately handle all the past 2017 models, to be honest, this was expected. I am sorry GLBM and SOG fans..
These are the problems I have...
-
The pliers I have received are misaligned at the tip. I really hate this when it new out of package. I have never had this problems with any of my SOGs before. So this time I am really disappointed.
-
I had very bad tool clumping on one side of the handle. When I pull out the serrated blade, everything else comes out with it. Took a closer look and realise the pivot is stuck with the blade and is moving along. I actually took apart that side of the handle immediately. I was right. The pivot hole of the blade is stuck with the pivot. Its pivot hole is somehow smaller than the rest of the implements. So whoever put this together simply does not care and probably hammered the pivot in. I had to do some filing to sort this out.
-
My serrated blade is slightly warped. Scissors crosses over too much, giving so much resistant that its almost unusable.
-
The back end of the tools that rubs against the locks are very rough. Making it very gritty when opening the tools.
-
Washers between the tools are very poor quality and mostly deformed but probably because they are so thin.
-
Some parts on the handle frame are finger slicing sharp..
There are the rants I have using eyeball and hand-ons inspection. More observations to come when I start using them.
Returning is not an option as I am on the other side of the world and paying for shipping simply does not make sense...
Having said all of the above, most problems are user correctable other than the the pliers misalignment...... I am still liking this tool at the moment and looking forward to using it!
Oh btw, Lynn, if you are reading this, this is a left hand scissors.....

-
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login

