Car boot finds
-
Looks like you did well and cool petrol can !

-
I think I did, some useful bits but I'm not sure what to do with the petrol can now,
I need to stabilize the label some how
Thinking...

-
@Sparky415 said:
Absolutely beautiful day here so I got up early and set off for the bootie
Promised myself I wouldn't buy anything I didn't need

Got some useful tools and a very cheap multitool

Yep nothing there that I can't find a use for


Spoiler:
I nearly got away with nothing but useful stuff

Bought a snap-on petrol can, I'm hoping I can save the label


The Footprint and the Bahco adjustable wrench are always great items to find. The pruning multi tool is one I rarely see. And I've been looking. The Snapon gas can even in that shape would probably bring a pretty penny on this side of the pond.

-
Absolutely beautiful day here so I got up early and set off for the bootie
Promised myself I wouldn't buy anything I didn't need

Got some useful tools and a very cheap multitool

Yep nothing there that I can't find a use for


Spoiler:
I nearly got away with nothing but useful stuff

Bought a snap-on petrol can, I'm hoping I can save the label


The Footprint and the Bahco adjustable wrench are always great items to find. The pruning multi tool is one I rarely see. And I've been looking. The Snapon gas can even in that shape would probably bring a pretty penny on this side of the pond.

It's the first time I've actually thought I should sell something on for profit, might have to do it

You know me Yadda I do like a wrench or two :D and the multitool is soaking in WD40 at the moment

-
My Mum has an old petrol can like that, no label though.
-
Absolutely beautiful day here so I got up early and set off for the bootie
Promised myself I wouldn't buy anything I didn't need

Got some useful tools and a very cheap multitool

Yep nothing there that I can't find a use for


Spoiler:
I nearly got away with nothing but useful stuff

Bought a snap-on petrol can, I'm hoping I can save the label


The Footprint and the Bahco adjustable wrench are always great items to find. The pruning multi tool is one I rarely see. And I've been looking. The Snapon gas can even in that shape would probably bring a pretty penny on this side of the pond.

It's the first time I've actually thought I should sell something on for profit, might have to do it

You know me Yadda I do like a wrench or two :D and the multitool is soaking in WD40 at the moment

Definitely post a pic when it emerges from its bath. Any marks on the Ratchet?
-
I've had a closer look at the petrol can, it was made in England with an added snap on sticker :(
These have cleaned up nicely and now work well


-
The Ratchet is just stamped Japan, didn't turn, WD40 with some wiggling and now its good

The multitool is cheap made in China kinda rubbish
The two tap wrenches are both made in England and really nice quality
-
@Sparky415 said:
The Ratchet is just stamped Japan, didn't turn, WD40 with some wiggling and now its good
The multitool is cheap made in China kinda rubbish
The two tap wrenches are both made in England and really nice quality
You should take the ratchet a part and clean it. Japanese, probably very good tool. Expected the pruners to be low quality, still want one.
-
@Sparky415 said:
I've had a closer look at the petrol can, it was made in England with an added snap on sticker :(These have cleaned up nicely and now work well


Too bad about the can. Wire strippers?
-
The Ratchet is just stamped Japan, didn't turn, WD40 with some wiggling and now its good

The multitool is cheap made in China kinda rubbish
The two tap wrenches are both made in England and really nice quality
You should take the ratchet a part and clean it. Japanese, probably very good tool. Expected the pruners to be low quality, still want one.
I saw a garden pruner multitool at the big box store the other weekend. I think they were only about AU$15.00 or so, so they must be around. Brand Saxon - Multi-function Bypass Pruner

Can't find them in Aus online store but this is from NZ Bunnings Warehouse
-
Looks more useful than my Vista.

I do have something similar by Valtev (?) and it is awful.
-
I've had a closer look at the petrol can, it was made in England with an added snap on sticker :(
These have cleaned up nicely and now work well


Too bad about the can. Wire strippers?
They are crimpers for electrical terminations


-
The Ratchet is just stamped Japan, didn't turn, WD40 with some wiggling and now its good

The multitool is cheap made in China kinda rubbish
The two tap wrenches are both made in England and really nice quality
You should take the ratchet a part and clean it. Japanese, probably very good tool. Expected the pruners to be low quality, still want one.
I'm surprised I managed to open the ratchet without problems
Not too bad inside but a few damaged teeth on one side of the 'cam' (?)
All cleaned, oiled and back together now

-
New Page Banana Dance:

@Yadda said:
What are your issues with the Vista? Not having one I am interested in hearing about its shortcomings. I have a Hybrid. I like it a lot, but I don't use it everyday.I think my main issue is that it is not a Hybrid. :D If it was a gardening tool I might actually use it.

Hybrid/Vista Owners' Club: /topic/66907
-
100 pages of Bootie goodness

-
@TazzieRob said:
100 pages of Bootie goodness
True! I should have added more bananas...
-
The Ratchet is just stamped Japan, didn't turn, WD40 with some wiggling and now its good

The multitool is cheap made in China kinda rubbish
The two tap wrenches are both made in England and really nice quality
You should take the ratchet a part and clean it. Japanese, probably very good tool. Expected the pruners to be low quality, still want one.
I'm surprised I managed to open the ratchet without problems
Not too bad inside but a few damaged teeth on one side of the 'cam' (?)
All cleaned, oiled and back together now

Consider packing it with silicon grease. Lasts longer.
-
The Ratchet is just stamped Japan, didn't turn, WD40 with some wiggling and now its good

The multitool is cheap made in China kinda rubbish
The two tap wrenches are both made in England and really nice quality
You should take the ratchet a part and clean it. Japanese, probably very good tool. Expected the pruners to be low quality, still want one.
I'm surprised I managed to open the ratchet without problems
Not too bad inside but a few damaged teeth on one side of the 'cam' (?)
All cleaned, oiled and back together now

Consider packing it with silicone grease. Lasts longer and reduces friction. You can buy repair kits for most of the major brand ratchets.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login