Car boot finds
-
The Ratchet is just stamped Japan, didn't turn, WD40 with some wiggling and now its good

The multitool is cheap made in China kinda rubbish
The two tap wrenches are both made in England and really nice quality
You should take the ratchet a part and clean it. Japanese, probably very good tool. Expected the pruners to be low quality, still want one.
I saw a garden pruner multitool at the big box store the other weekend. I think they were only about AU$15.00 or so, so they must be around. Brand Saxon - Multi-function Bypass Pruner

Can't find them in Aus online store but this is from NZ Bunnings Warehouse
-
Looks more useful than my Vista.

I do have something similar by Valtev (?) and it is awful.
-
I've had a closer look at the petrol can, it was made in England with an added snap on sticker :(
These have cleaned up nicely and now work well


Too bad about the can. Wire strippers?
They are crimpers for electrical terminations


-
The Ratchet is just stamped Japan, didn't turn, WD40 with some wiggling and now its good

The multitool is cheap made in China kinda rubbish
The two tap wrenches are both made in England and really nice quality
You should take the ratchet a part and clean it. Japanese, probably very good tool. Expected the pruners to be low quality, still want one.
I'm surprised I managed to open the ratchet without problems
Not too bad inside but a few damaged teeth on one side of the 'cam' (?)
All cleaned, oiled and back together now

-
New Page Banana Dance:

@Yadda said:
What are your issues with the Vista? Not having one I am interested in hearing about its shortcomings. I have a Hybrid. I like it a lot, but I don't use it everyday.I think my main issue is that it is not a Hybrid. :D If it was a gardening tool I might actually use it.

Hybrid/Vista Owners' Club: /topic/66907
-
100 pages of Bootie goodness

-
@TazzieRob said:
100 pages of Bootie goodness
True! I should have added more bananas...
-
The Ratchet is just stamped Japan, didn't turn, WD40 with some wiggling and now its good

The multitool is cheap made in China kinda rubbish
The two tap wrenches are both made in England and really nice quality
You should take the ratchet a part and clean it. Japanese, probably very good tool. Expected the pruners to be low quality, still want one.
I'm surprised I managed to open the ratchet without problems
Not too bad inside but a few damaged teeth on one side of the 'cam' (?)
All cleaned, oiled and back together now

Consider packing it with silicon grease. Lasts longer.
-
The Ratchet is just stamped Japan, didn't turn, WD40 with some wiggling and now its good

The multitool is cheap made in China kinda rubbish
The two tap wrenches are both made in England and really nice quality
You should take the ratchet a part and clean it. Japanese, probably very good tool. Expected the pruners to be low quality, still want one.
I'm surprised I managed to open the ratchet without problems
Not too bad inside but a few damaged teeth on one side of the 'cam' (?)
All cleaned, oiled and back together now

Consider packing it with silicone grease. Lasts longer and reduces friction. You can buy repair kits for most of the major brand ratchets.
-
@Yadda said:
Consider packing it with silicone grease. Lasts longer and reduces friction. You can buy repair kits for most of the major brand ratchets.I shall ignore your advice this one time Yadda

I feel that if you added grease it would hold particles and become cutting compound
I prefer to blast out any grittyness with WD40 then add a light oilIt works good enough for me at the moment

Just to add that I can't remember the last time I used a 1/2inch drive at home, might have been working on my breaks or wheel bearings a few years ago, so it's not going to get used a lot in my garage -
Consider packing it with silicone grease. Lasts longer and reduces friction. You can buy repair kits for most of the major brand ratchets.
I shall ignore your advice this one time Yadda

I feel that if you added grease it would hold particles and become cutting compound
I prefer to blast out any grittyness with WD40 then add a light oilIt works good enough for me at the moment

Just to add that I can't remember the last time I used a 1/2inch drive at home, might have been working on my breaks or wheel bearings a few years ago, so it's not going to get used a lot in my garageAll good Tony!

-
When I rebuilt a 1/4 SK Tools ratchet with their rebuild kit provided by warranty, I used the small packet of grease in the pack, which appeared to be something like Vaseline.
What is the bicycle type wrench below your SAK?
That pruner MT is really weird. Most are butterfly type tools, not the Toolclip copy. I have a couple with pliers--they're pretty crappy. However, working in and around the garden, having something super cheap you can afford to beat up is always a plus. Gotta love the weeder tool on all of that variety of multitool.
I'm hoping I can go to the one near me on Monday. My grandmother is wanting to go to a greenhouse which is pretty much next door to the livestock market where it's held.
-
@Syncop8r said:
New Page Banana Dance:

What are your issues with the Vista? Not having one I am interested in hearing about its shortcomings. I have a Hybrid. I like it a lot, but I don't use it everyday.
I think my main issue is that it is not a Hybrid. :D If it was a gardening tool I might actually use it.

Hybrid/Vista Owners' Club: /topic/66907
I assume these were for Duck hunters etc, not really gardeners?
-
What are your issues with the Vista? Not having one I am interested in hearing about its shortcomings. I have a Hybrid. I like it a lot, but I don't use it everyday.
I think my main issue is that it is not a Hybrid. :D If it was a gardening tool I might actually use it.

Hybrid/Vista Owners' Club: /topic/66907
I assume these were for Duck hunters etc, not really gardeners?
You are correct.

-
@cody6268 said:
What is the bicycle type wrench below your SAK?I'm hoping I can go to the one near me on Monday. My grandmother is wanting to go to a greenhouse which is pretty much next door to the livestock market where it's held.
Those Cody are the best pipe grips in the world!
http://footprint-tools.com/Plumbers-ToolsGood luck at the weekend

-
What is the bicycle type wrench below your SAK?
I'm hoping I can go to the one near me on Monday. My grandmother is wanting to go to a greenhouse which is pretty much next door to the livestock market where it's held.
Those Cody are the best pipe grips in the world!
http://footprint-tools.com/Plumbers-ToolsGood luck at the weekend

As the current world record holder for owning the most pairs of Footprints, I believe Tony is a little biased, but he isn't wrong.

-
Maybe
:D
-
What is the bicycle type wrench below your SAK?
I'm hoping I can go to the one near me on Monday. My grandmother is wanting to go to a greenhouse which is pretty much next door to the livestock market where it's held.
Those Cody are the best pipe grips in the world!
http://footprint-tools.com/Plumbers-ToolsGood luck at the weekend

Those tools are great. I've got a couple of sets that used to belong to my grandad and they are still going strong.
-
They are almost indestructible Kev
the worse thing that can happen is loose the screw :ahhhI spent 3 hours walking about a very hot field this morning :(
But found all this :D
Top middle is a wella soldering iron, left top is a cows horn thats been made in to some kind of scoop

What's in the tool box I hear you ask
Spoiler:
I was feeling horny
Not cheap but useful

Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login