Victorinox Tang Stamps
-
I also think the combo tool was introduced some time between 80-82, not 86

I think the bevel on the tip of the awl was stopped by 80 as well.
I believe I can place some ballpark dates on the phillips as well: First is SAAM's dates, then mine (mine only has one confused face) :D
-
(1952-????) square, file, no can-key
-
(????-????) square, no file, no can-key
-
(????-????) square, no file, can-key
-
(1992?-????) round, can-key
-
(????-now) round, no can-key
-
(1952 - 1968) square, file, no can-key
-
Never seen it???? (square, no file, no can-key
-
(1968 -1980) square, no file, can-key
-
(1980 - 1992) round, can key
-
1992 - present round no can key
-
-
.
For me and my collection I am sticking with the major tool evolution changes

Hey El CS
- There is some info on the WC stamps in SOSAK/SAKnights - There is a link at the bottom of the Soldier 61 (link) page in the Wiki.
Have you seen this? Any good?
And for the five turn to four turn CS switch is the SAAMS (link) date not correct?
Yes agree with you there is much less info available on the non-91mm sizes for dating
The article on the 61 soldiers is good.
Thanks for pointing that out 
- There is some info on the WC stamps in SOSAK/SAKnights - There is a link at the bottom of the Soldier 61 (link) page in the Wiki.
-
Aha - Interesting again Mr El CS
I will have to update my SAK dating table
I got very excited by your item 3.
I collect the tool variations (mainly according to SAAMS, and other info learned here) and I thought that this was the one tool, that was missing from my collection!
If it does not exist at all then my collection is complete - :ahhh Woo hoo !!But I went to check ....... and I do have the square Ph with can-key and no file. It's on an old 84mm Hoffritz Tinker.
The one I do not have is the square Ph with no can-key and no file ???
So if you have one for trade/purchase I would be very happy to have a chat :DWe need some of the old timers like ICanFixThat / JB / Stressmaster to chip in on this etc
PS. Ulli - Sorry to hijack your thread - However it's all dating info - So I hope that is OK

PPS. Thanks for the comment on the 61 Soldier page - I did some major restructuring/rework on that a while ago -
@Huntsman said:
Aha - Interesting again Mr El CSBut I went to check ....... and I do have the square Ph with can-key and no file. It's on an old 84mm Hoffritz Tinker.
It's the square no file no can key that I have not run into... have you? I'm pretty sure that can key stayed in there on all the Phillips from 68-92
I might have been fixing a typo when you first glanced
-
Yep - The 'never seen it' moved from 3 to 2 !! - So we are in agreement !!
It's number 2 that I have never seen either.
Although my collection is not that extensive compared to many - And I don't trawl eBay so much either these days!!
So if anyone has the square Ph with no can-key and no file - Let us know!!
-

Got to keep it alive.
-
This is the thread that lead me to becoming a Knight

-
@Huntsman said:
Definitely - Dating SAKs is as much an art as a science!!
Our info says the awl got it's eye and the SD its half stop in 85, and the V got big in 86Particularly for changes that happened in consecutive years - we see SAKs that break the rules!
I think its all down to the parts bin!! ie Old style parts being used after they are 'retired'.I know that our dates are "circa" and forgive me if this has been discussed, but may I politely submit that we should move the dates for the half stop and the sewing eye FIRMLY in the year 1984 at least. Here's why I think so... Have we seen any of those two changes in known 1983 models? I don't know the answer to that but I have a Vic Explorer, older style burgundy box with white slide out cardboard tray and paperwork. The tray is inked "Explorer " and embossed "84". The knife tang has Victorinox (normal size V), Swizerland, stainless, rostfrei. Back tang marked officier suisse, with the bow and cross. Cross touches bow, bow touches C, cross does not touch Letter i. The mag glass is framed in grey plastic with a slight bevel. The snap ring holder is on a shim at the corkscrew layer, the scissors held by a screw. This knife has a grooved, 4 twist corkscrew, and more importantly, it has a half-stop bottle opener and a sewing eye in the awl. Is that aspositively dated to 1984 as anything we have seen, seeing as the box in which in came was marked from the factory? We have been saying '85 for both of those changes, but I have BOTH of those implementations on this clearly marked 1984 Explorer.
Any thoughts or contradictions? I try to read all of these dating posts but it's hard to keep up.
-
By the way, the box is marked 84, but there is a hand written note inside "from Uncle Barney Wallis 6-27-87 for High School graduation"
If the knife was made in 1984, and it was given as a gift in 1987, then we have some idea of production, shipping, and shelf time - at least during that era.
So, when I bought my Super Tinker about 1988, it could have been on the shelf for three years prior and have 1985 features.
But this Explorer is marked 1984 from Victorinox itself. Should that be the best we have to go by?
-
Hi, ThundahBeagle.
Could you make a detail photo to illustrate your post? It seems to be interesting. -
@Frater_Martin said:
Hi, ThundahBeagle.
Could you make a detail photo to illustrate your post? It seems to be interesting.Happy to, Frater. At the moment I am at work, however I hope to do that when I have returned.
-
Some pics of the '84 Explorer...

-
...

-
...

-
...

-
...

-
...

-
Had to smudge up the blade a bit to keep the reflections down, but I think these pics demonstrate the Explorer with both the large screwdriver / bottle cap opener half stop, and the sewing eye awl. The older style box is inked Explorer and impressed '84'. I do have more pics, but the limited picture size posting requirements have us at a slight disadvantage.
It is especially because this clearly marked '84 has both of those features that I would think that these changes would have had to have been codified in 1984 or possibly even 1983.
Again, have we seen any known 1983's with either of these two traits?
I hope this helps
-
could you explain the scale calendar and how it works? I have noticed there was one inside, but was unsure of how to use it to extract data (did not want my ignorance leading to a bad assumption)
Don’t you know? I am not a speSmurfpillst in that, moreover English is not my native language, but I can try.
When Victorinox factory molds plastic scales of the pressured hot plastic, they insert special tabs into a matrix. These tabs can show the year of the scale molding, number of the matrix etc. Some people call first of them “calendar”.
It can be number of the year, special circus of numbers/symbols etc. (see picture below). Pay attention that it is only the year of the scale production, not the year when the knife was born. Sometimes i did not find any calendars on scales.
We have to remove both scales to see both years on internal side of it. I know, it is a bit invasive method. Sometimes we can see the calendar through transparent plastic using a magnification glass and a flashlight.Sort of like turning your Igloo Playmate cooler upside down and looking at the dial shaped calendar that marks the date of manufacture, or pulling up the cup-holder of your 1990's Blazer, flipping it upside down and seeing the same sort of thing.
Maybe that doesn't tell us the exact date of knife manufacture, but it is a good reference combined with other known marker features. Same with the underside of the cup-holder. You might see a 93 cup holder in a 94 Blazer, but with original equipment, never the other way around
-
Hi Guys,
Great discussion. I think I can add a data point or two to the growing body of evidence. In 1980 I bought a 91 mm Tinker. On a camping trip in high school the can opener broke so I sent it to Victorinox. Rather than repair it, they replaced it with a brand new knife. I might have completely forgotten this little life event if it were not for the fact that I saved the paperwork from Victorinox in 1983. So presumably my Tinker would be 1983 at the newest.
It has these features:
- half-stop cap lifter/screw driver
- awl with sewing eye
- round Phillips s/d with can key slot
- front tang marking: capital V in VSSR
- obverse tang marking: cross touching bow, cross not touching I, bow NOT touching C (but I had to look close).
Also, please note that the key ring is missing because I filed off its attachment point when I went through this regretful "modding" phase back in the 1990s.
The paperwork from Victorinox is dated 7 September 1983 and reads "New Tinker." I've included a picture of the box, but I don't remember if this is my original box from my 1980 knife, or if it's what the 1983 replacement knife came in. I checked it for a year emboss on the bottom tray and there was nothing. The end of the sliding tray is stamped "Tinker."
Here are some pics. I hope this helps advance the discussion.
Kind regards,
Myron






Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login