The multitool of the automotive world!
-
You could always install a hitch at back of the trailer, and tow another smaller one behind it! :D
-
@Grant Lamontagne said:
I imagined it was going to go on the outside of the old location...
I don't want to put it on the front as it is a tilt deck and the further forward it is the more weight I have to contend with when tilting the trailer. Plus with the Jeep spare on the back and the boats overhanging it, it would be more awkward to get to when needed.
OK, I will allow that then. ;)
@Grant Lamontagne said:
And yes, I do want to (eventually) put a tool box on the front. I would like a sizeable one to put a jack, some jack stands, a tire iron, maybe a compressor and a small shovel (Maybe my Cold Steel one) and a few other things.Sounds like you need another trailer just to carry all that.

I just need one of these, preferably one that doesn't cost $600....


Def
-
Not the ones I was thinking of (probably too narrow) but http://www.herooutdoors.com/nato-40mm-l-70-beaufort-ammo-can/
My friend has just the standard .50cal box welded to the drawbar. http://www.armysurpluswarehouse.com/ammo-cans-storage-containers/50-cal-ammo-box-grade-2.html -
Those are indeed nice, but I want to put farm jack in it and some jack stands. The stands are probably about 10" square on the base and the jack is roughly 40" high.
Def
-
I'm a bit surprised to see the towbar on your trailer, locally trailers will have a triangular towbar or a combination of something like yours with supports from the outside corners of the trailer to just before the hitch

Quite frankly, I would be nervous loading my toys in that trailer! :ahhh
-
I don't. I have loaded well over a thousand pounds in this thing and had only one serious issue with it. Now with the thicker metal tongue I doubt I will have that issue again.
I have the kind of triangular tongue on my camper but I see lots of straight tongues like this one on trailers that are heavier than mine. Of course, if I had access to welding equipment I think I'd probably beef it up some because that's just something I like to do.
Def
-
I've made a few changes to my trailer lately. First off, I have added the spare tire carrier that I mentioned above, and upgraded the wheel jack to a more useful one. A few months ago I also picked up and older Thule cargo box and spent a fair bit of time refurbishing it. I've put wider crossbars on the trailer and mounted the boats on the outboard sides of the bed, while the Thule box sits in the middle. The Thule box is a 250L model originally imported in the 80's for skis, but it does a great job of holding all of my kayak gear, including sprayskirts, paddles, safety kits, pfd's, carts and other stuff.

It all fits together nicely and tows pretty much the same as it did before. I thought with the boats sitting wider that they may catch the wind a bit more, but so far I haven't noticed any differences.

I think I will have to set the cross bars back a bit more as the big boat (pink one :P) sticks forward a bit too much and actually scratched the fiberglass top of my Jeep the other day while I was trying to turn too tightly to get out of a parking lot.


Last summer I ripped out all of the existing wiring since it had been damaged in the infamous Day From Hell and rather than continue to patch it up I just redid it from scratch. I also made sure to run the new wiring through ABS conduit to make sure it is protected in the future.
I used to have a big Rubbermaid bin that I kept my kayak stuff in, but not everything fit in it. The Thule box isn't much bigger than the Rubbermaid bin but it is a better configuration and everything fits into it much better.

In fact, it is long enough that I could (theoretically) carry some of my paddles assembled, but I really don't see any need to do that. Instead I have them disassembled, with all of the blades in the most forward section of the box, so they don't come in contact with anything that might chip, crack or break them.

Also, unlike the Rubbermaid bin, the Thule box locks and is bolted on, so I feel a bit safer leaving things like my expensive paddles in it, knowing they should be relatively safe. Yes, they can still be stolen, but it will take some effort.
The worst part is, everything fits so well into the Thule box that I feel like I am forgetting things- with the old setup I would put the box on the trailer, then get the paddles, then get the carts etc. Now it is all there and I can't help but feel like I have left something behind! :ahhh
Def
-
Nice set up !

-
Thanks!
The Thule boxes are super expensive to buy new but this 30 year old model was listed locally for $100 so I decided to give it a try. I wasn't 100% sure this was the setup that I wanted to go with, but I really wanted to see if it worked. The box is difficult to access with the boats on, but that's not too big a deal because it's only boat stuff in it. The blue Rubbermaid bin you see on the trailer has straps, cargo nets and other general trailer stuff in it and is easily accessible.
The box has two locking latches, both keyed alike. The box came with one key, which I almost immediately broke off when bringing the box home. It cost another $60 for a local locksmith to service the locks, cut two new keys and remove the old key fragment, but it was well worth it- the locks are as ultra smooth as they day they were made!
I used Mr Clean Magic Erasers on the outside of the box and removed the Thule stickers that were cracked and torn and falling off. The plastic looks like brand new now, not the 30+ year old plastic it really is. I thought about painting it, but it came out so nice that I didn't feel I needed to.
I'll post pics of the process as soon as I find them.... I have no doubt that if I decide I don't like it I'll be able to get more back from it than I put into It, so thats always a good feel8ng!
Def
-
This might be a dumb question... but why not have the kayaks pointing 'in' rather than 'out'?

-
I have considered that, but there are two problems with doing it that way.
1- with the kayaks pointed out I can see the tips of them. They have a bit of a curve to them and if they were the other way around I would t know where they were.
2- the J racks are longer on the "back" side and so I would have to lift the boats over to seat them in. Also then I would have to climb into the trailer to secure the straps that hold them in place.
Def
-
I did some very important work on the cargo box today.





That feels better! :D
Def
-
They should pay you for advertising.....
-
I made a startling discovery a few days ago.

On the side of the tire, where it says NOT FOR HIGHWAY USE they really mean it.



Minutes after I got on the highway last week a white F-150 pulled up next to me and wound down his window, yelling something I couldn't hear while pointing at the trailer and pointing down. I knew something was wrong, so I waved a thank you and pulled off at the next exit to find that my wheel jack was still down. The wheel was just barely touching the ground, but obviously it was down enough, and the wheel, as you can see, looks like it was shredded. It was split, worn out and popped all at once, and the hub was also separated.

Out came my trusty bottle jack/jack stand combo to lift the tongue of the trailer while I removed the wheel.

I like this jack because it will actually go high enough to lift my Jeep, and is strong enough to lift my Jeep and has a bolt built into it that allows it to work as a jack stand as well.

The wheel was easy enough to remove- it was just a single long bolt, which came off nicely with an adjustable wrench and a 15/16ths" ratchet.

I figured I'd better replace it as it doesn't move so well when it's in pieces, and luckily the store that I got the jack from had replacements, probably because I am not the first person to have done this.

I was impressed that the bearings were still intact, given the devastation of the rest of the wheel, and when I went to take a photo, they fell out right in my hand.


And the bearings weren't the only parts coming off in my hands! :ahhh

The new wheel is actually slightly larger than the original, but it fits in the jack well enough, and really, the wheel isn't (normally) used for much other than shifting the trailer a few meters at most, so it doesn't need to be absolutely perfect. It rubs a bit, but not a huge amount, and I doubt it will for long. It isn't actually as much larger as it appears in the photo- the original is somewhat worn down, and under the new one, making the size look very different.

New wheel installed, and showing where it rubs slightly. There's a good possibility that the bolt was bent sightly as the wheel only touches at certain points in it's rotation, but in the end it cost me $13 to fix, and I'm ok with it because, as I said, it doesn't need to go far.
My stupidity has cost me a lot more than $13 in the past, so I'm happy. :D
Def
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login