Plierench the Ultimate Collector's Multitool
-
I saw on another forum a letter from Mr Eifel as an example of a rude (depression era) correspondence.
In that letter Mr. Eifel talks about a plierench "demonstrating block and ball" and asks that it be returned.
I have a demo block and ball in my modest plierench collection. Pictured below is the demo block the "ball" is visible attached to the top of the block. I can post a better picture if anyone is interested.
I've never seen another one.


-
@cap241 said:
I saw on another forum a letter from Mr Eifel as an example of a rude (depression era) correspondence.In that letter Mr. Eifel talks about a plierench "demonstrating block and ball" and asks that it be returned.
I have a demo block and ball in my modest plierench collection. Pictured below is the demo block the "ball" is visible attached to the top of the block. I can post a better picture if anyone is interested.
I've never seen another one.
Wow! Cap you've been holding out on me!. This is the first separate block I have seen. I have seen a sales kit box on the 'bay. It was missing the brass corners and other bits. It went for way more than it was worth to me for the fair condition. How are the bolt heads held in place? What is the difference in the bottom two bolt heads? Additional pictures would be great!
I've seen the letter before. Eifel was a salesman at heart. Having his business survive the Great Depression, it appears he was driven to hustle for every sale possible.
-
Yadda - I've never tinkered with it. My father was a plierench fan big time he had several of them in the 1950s. I remember seeing this block and him telling me it was for demonstrating plierench uses. It was in beautiful condition back then with a shiny chrome ball on top... It seemed odd because I thought putting the tool to it would scratch it. I'll look at it closer and take some pictures.
OK I have pictures now. The middle one is a big nut & bolt through the wood. The ones on either side are screwed into holes threaded in the wood. The chrome ball is brazed onto a brass(?) pipe inserted into a hole with a set-screw through the threaded wood and into a (threaded) hole in the pipe.
I can't imagine what the ball is supposed to demonstrate except for an interesting way to insert and turn the pipe to line up with the threaded hole in the wood. I used to wonder if the plierench was to grip the ball and turn, but obviously not with a set-screw in it.
-
It seems like a overly simplified demo piece, but actually when you hold the block in one hand it demonstrates the parallel jaws of the plierench quite well they probably carried a "regular" pliers to show the contrast. Another element of the demonstration, I think, was to fold a (copper) penny in half and half again something almost impossible with a common pliers.
-
@cap241 said:
It seems like a overly simplified demo piece, but actually when you hold the block in one hand it demonstrates the parallel jaws of the plierench quite well they probably carried a "regular" pliers to show the contrast. Another element of the demonstration, I think, was to fold a (copper) penny in half and half again something almost impossible with a common pliers.The ball is probably to show the Plierench's gripping power. Advertisements in the 50's show the Plierench holding onto a Steel ball at the end of a chain and a pretty Plierench Girl sitting in a swing suspended from the plier handle. Thank you for the photos. Very cool!
-
Interesting ! That sounds logical about the ball on the end. Can you post the picture of the Plierench girl sitting on the swing?
-
First one like this I've ever seen and with a push from a friend down under, I made the plunge.
I must protest this outrageous slander on my good name ! It was a teeny tiny nudge, at most
:D ;)With a really sharp stick over 2,000 miles long....

2000 miles? How about 12000 miles.
steve
-
Hello All!
First post on the MT forum - I found a treasure at a recent yard sale, and am trying to determine what version of it I have. Obviously it is a Plierench, but the only image I've found of a similarly marked piece had a hole drilled in it, on the unlabeled side. It is approximately halfway between the wire cutter 'body pin' and the top of the plate. Mine has no hole there.
Mine was used as a hammer, more than once. No other jaws, no bag. It appears to have a spring on the jaw side, but it doesn't appear to do anything. Maybe a retainer for the removable jaw pin?
Anyway, I couldn't resist buying it out of the big rubbermaid bucket of rusty tools it was in. I'm thinking of hanging it on my shop wall under my brace and bit/auger 'display', next to my oil can spout.
What version is it?
Cheers!
Pr


-
First post on the MT forum - I found a treasure at a recent yard sale, and am trying to determine what version of it I have. Obviously it is a Plierench, but the only image I've found of a similarly marked piece had a hole drilled in it, on the unlabeled side. It is approximately halfway between the wire cutter 'body pin' and the top of the plate. Mine has no hole there.
Mine was used as a hammer, more than once. No other jaws, no bag. It appears to have a spring on the jaw side, but it doesn't appear to do anything. Maybe a retainer for the removable jaw pin?
Anyway, I couldn't resist buying it out of the big rubbermaid bucket of rusty tools it was in. I'm thinking of hanging it on my shop wall under my brace and bit/auger 'display', next to my oil can spout.
What version is it?
Cheers!
Pr
Oh boy, oh boy a question for Me!!!! Quite possibly the best first post ever!!!
You did find an almost 95 year old treasure! You'll have to share the princely sum you paid. You should cross post this in the Car Boots thread....
You have a 1923-24 era World Flight version of the world famous Eifel Plierench. It appears to have straight gears? If the gears are angled the it is a late 1924- 31 World Flight version. It could have been sold by itself or as a set with three jaws in canvas sheath.
Many of them were used as hammers. I have one (later lighter model) that is cracked due to such abuse. The spring does hold the jaw in place. I'll try to get a photo of the user manual showing how it works. The one you saw with the hole was probably missing a retaining pin that holds the head together or it was an earlier model (1921 or 1922) missing the screw.
Check out the rest of this thread for more info.
Regards,
Yadda -
Yadda,
Thanks for the response!
This one looks to have straight 'gear' teeth.
Here is a link to the eBay piece I mentioned with the additional hole: https://www.ebay.com/itm/Vtg-EIFEL-FLASH-PLIERENCH-PAT-5-2-16-1916-FLASHSL-039-S-CN-CHICAGO-Plier-Wrench-/173378121309?hash=item285e242e5d%3Ag%3APW4AAOSwqoRbLuNr&_nkw=plierench&LH_Complete=1&rt=nc&nma=true&si=uRkMdnjwk7ACMI4swNO4KKN6WCs%253D&orig_cvip=true&_trksid=p2047675.l2557
I bought the tool with a couple other odds and ends, but the seller had a $6.00 tag on it - I didn't pay that much.
Hopefully it's worth more than that, but unless someone needs it for their collection, it goes on my 'weird wall'.
Identifying these pliers was a lot easier than what I went through figuring out what I had bought a while back. That piece turned out to be a battery terminal puller!
Pr
-
https://i.imgur.com/zsCc0IL.jpg
How would one restore this as a working tool and not a collectable? Acetone bath and off the shelf tool lubricant?
Pliers work. I'd just like to know what viscosity oil to use for smoother operation (I have air tool oil laying around and it's not up to the job).
Ty
-
@MyNameIsNotTodd said:
https://i.imgur.com/zsCc0IL.jpgHow would one restore this as a working tool and not a collectable? Acetone bath and off the shelf tool lubricant?
Pliers work. I'd just like to know what viscosity oil to use for smoother operation (I have air tool oil laying around and it's not up to the job).
Ty
Hi Ty,
You have one of the oldest models. Your tool was made in 1922 so it is 97 years old.
Your tool can be disassembled using the screw, but if it works I wouldn't go that far. It should work fine without restoration. If you want to remove the rust, vinegar or rust remover should work fine. I've never used acetone. Lubrication? Use silicone grease or 3-in-1 oil. There is a video on You Tube showing a Plierench restoration. I'll try to find and post the link.
-
Restoration video link.
-
Cool video Y!

-
John is great!! He's got an eye for tools, he's always showing something different or interesting. Thanks for sharing Yadda!
-
Than you Gentlemen.

-
A group shot of my collection.


-
Wow ! :o Awesome collection you have Yadda

-
Very impressive !!!
:o
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login