Plierench the Ultimate Collector's Multitool
-
Interesting ! That sounds logical about the ball on the end. Can you post the picture of the Plierench girl sitting on the swing?
-
First one like this I've ever seen and with a push from a friend down under, I made the plunge.
I must protest this outrageous slander on my good name ! It was a teeny tiny nudge, at most
:D ;)With a really sharp stick over 2,000 miles long....

2000 miles? How about 12000 miles.
steve
-
Hello All!
First post on the MT forum - I found a treasure at a recent yard sale, and am trying to determine what version of it I have. Obviously it is a Plierench, but the only image I've found of a similarly marked piece had a hole drilled in it, on the unlabeled side. It is approximately halfway between the wire cutter 'body pin' and the top of the plate. Mine has no hole there.
Mine was used as a hammer, more than once. No other jaws, no bag. It appears to have a spring on the jaw side, but it doesn't appear to do anything. Maybe a retainer for the removable jaw pin?
Anyway, I couldn't resist buying it out of the big rubbermaid bucket of rusty tools it was in. I'm thinking of hanging it on my shop wall under my brace and bit/auger 'display', next to my oil can spout.
What version is it?
Cheers!
Pr


-
First post on the MT forum - I found a treasure at a recent yard sale, and am trying to determine what version of it I have. Obviously it is a Plierench, but the only image I've found of a similarly marked piece had a hole drilled in it, on the unlabeled side. It is approximately halfway between the wire cutter 'body pin' and the top of the plate. Mine has no hole there.
Mine was used as a hammer, more than once. No other jaws, no bag. It appears to have a spring on the jaw side, but it doesn't appear to do anything. Maybe a retainer for the removable jaw pin?
Anyway, I couldn't resist buying it out of the big rubbermaid bucket of rusty tools it was in. I'm thinking of hanging it on my shop wall under my brace and bit/auger 'display', next to my oil can spout.
What version is it?
Cheers!
Pr
Oh boy, oh boy a question for Me!!!! Quite possibly the best first post ever!!!
You did find an almost 95 year old treasure! You'll have to share the princely sum you paid. You should cross post this in the Car Boots thread....
You have a 1923-24 era World Flight version of the world famous Eifel Plierench. It appears to have straight gears? If the gears are angled the it is a late 1924- 31 World Flight version. It could have been sold by itself or as a set with three jaws in canvas sheath.
Many of them were used as hammers. I have one (later lighter model) that is cracked due to such abuse. The spring does hold the jaw in place. I'll try to get a photo of the user manual showing how it works. The one you saw with the hole was probably missing a retaining pin that holds the head together or it was an earlier model (1921 or 1922) missing the screw.
Check out the rest of this thread for more info.
Regards,
Yadda -
Yadda,
Thanks for the response!
This one looks to have straight 'gear' teeth.
Here is a link to the eBay piece I mentioned with the additional hole: https://www.ebay.com/itm/Vtg-EIFEL-FLASH-PLIERENCH-PAT-5-2-16-1916-FLASHSL-039-S-CN-CHICAGO-Plier-Wrench-/173378121309?hash=item285e242e5d%3Ag%3APW4AAOSwqoRbLuNr&_nkw=plierench&LH_Complete=1&rt=nc&nma=true&si=uRkMdnjwk7ACMI4swNO4KKN6WCs%253D&orig_cvip=true&_trksid=p2047675.l2557
I bought the tool with a couple other odds and ends, but the seller had a $6.00 tag on it - I didn't pay that much.
Hopefully it's worth more than that, but unless someone needs it for their collection, it goes on my 'weird wall'.
Identifying these pliers was a lot easier than what I went through figuring out what I had bought a while back. That piece turned out to be a battery terminal puller!
Pr
-

How would one restore this as a working tool and not a collectable? Acetone bath and off the shelf tool lubricant?
Pliers work. I'd just like to know what viscosity oil to use for smoother operation (I have air tool oil laying around and it's not up to the job).
Ty
-
@MyNameIsNotTodd said:
https://i.imgur.com/zsCc0IL.jpgHow would one restore this as a working tool and not a collectable? Acetone bath and off the shelf tool lubricant?
Pliers work. I'd just like to know what viscosity oil to use for smoother operation (I have air tool oil laying around and it's not up to the job).
Ty
Hi Ty,
You have one of the oldest models. Your tool was made in 1922 so it is 97 years old.
Your tool can be disassembled using the screw, but if it works I wouldn't go that far. It should work fine without restoration. If you want to remove the rust, vinegar or rust remover should work fine. I've never used acetone. Lubrication? Use silicone grease or 3-in-1 oil. There is a video on You Tube showing a Plierench restoration. I'll try to find and post the link.
-
Restoration video link.
-
Cool video Y!

-
John is great!! He's got an eye for tools, he's always showing something different or interesting. Thanks for sharing Yadda!
-
Than you Gentlemen.

-
A group shot of my collection.


-
Wow ! :o Awesome collection you have Yadda

-
Very impressive !!!
:o -
Wow Yadda, your collection has grown considerably since the last time I saw it. :o

-
Thank you gentleman.

-
Bravo Yadda!!! What an outstanding collection. Thanks for sharing, it is much appreciated!!

-
Bumped from necrotopic realm! Here's mine :D


-
1936! Not bad for 86 years old!
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login