Shop projects
-
@Gareth said:
Those are awesome Tony. Guess I'm off to fleabay for a look-see. ;)Thanks G

What I did to them was...
Gave them a rub down with some wire wool to remove loose rust and paint but I didn't go over the top with the cleaning (as you can see)
Then gave them a good 'de-grease' in the bath (
) with scouring cream
Then about three coats of lacquer,Laquer makes everything look Good! :D

-
Great job Tony keeping there patina

-
Thanks Paul
I'm thinking of giving myself a coat or two :D -
@Sparky415 said:
Thanks Paul
I'm thinking of giving myself a coat or two :DCoat of what :D I'm hoping the weather is good this Sunday as going to that huge car boot sale and I usually do well at it

-
Thanks Paul
I'm thinking of giving myself a coat or two :DCoat of what :D I'm hoping the weather is good this Sunday as going to that huge car boot sale and I usually do well at it

Lacquer

Good luck at the bootie Mate

-
Great job on the tool boxes !

-
Thanks Paul
I'm thinking of giving myself a coat or two :DCoat of what :D I'm hoping the weather is good this Sunday as going to that huge car boot sale and I usually do well at it

Lacquer

Good luck at the bootie Mate

It's spelled 'liquor' mate!
-
:D


-
Coat of Liquor... I'll drink to that!

-
I'm looking at videos on how to make your own sawhorses....
-
Am I meant to see a picture or something? Is it just me not seeing it?

I also want my ones to be foldable. Currently working on my own design...
-
Surprisingly not Paul.
Here are some:
https://www.youtube.com/watch?v=GkqhJh2wSgM
https://www.youtube.com/watch?v=qgTkN_Epako
https://www.youtube.com/watch?v=gIk1EIJ_Pxs -
The top one looks very versatile and stable, the bottom two look virtually identical with slight variation. Those don't look as stable in the longitudinal direction but are more compact
-
How about these?
JR

-
I've wanted a shopdog for a while, but they seem to require alot of compound angled cuts. Please post your results here when you're done.
If you were looking for non folding ones I would have recommended these: https://www.youtube.com/watch?v=s89lN8FmDSI
But as far as folding ones go, the shopdog seems like the most solid alternative/option.
-
@MadPlumbarian said:
How about these?They look like the ones in the last video.
I watched another video of one similar to the shopdog and in the comments the shopdog guy accused the other guy of copying him. It turns out that design is everywhere though - someone linked to a store selling them.
My design may be a combination of the above styles. The legs will only splay outward in one plane not two to keep the cuts simple. I have some pallet wood I could try it with.
Now, what height? I measured a friends' and they are 690mm high. My Workmate copy is 760mm high so it could be good to have it at the same height but lower may be better for sawing.
-
Go 760, useful for working with the workmate,

if you hate them you can always 'adjust' the legs later ;)
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login